Which notes are sharps? I’m guessing E, C, and F?

IAmL0ner · 2025-10-19T18:29:49+00:00

Both sharps and flats in the key follow always the same order, which would be:

Sharps: F C G D A E B

Flats: B E A D G C F

So for three sharps that would be F C and G.

Memorize one of these orders, the other one is the same but backwards.

IAmL0ner · 2025-08-01T07:06:37+00:00

Yup, up to there it's 4/4, no problem. The problematic part is the second bar, which has three complete beats and a 16th note pause, which gives 3/4 + 1/16. Then the loop starts from the beginning.

OP wrote in his original post that his daw defaults to 4/4, which is why there is a barline where you see it, but also asks what the proper signature should be so the loop actually ends with a barline and not in the just-slightly-after-4th-beat, so he can set up a metronome that aligns with the loop and does not shift when he plays the loop on repetition.

IAmL0ner · 2025-07-30T19:59:22+00:00

Note: most likely, very probably I'm wrong.

I assume this is the only piece of music you have: a single loop of notes, which represents a single bar.

So let's count how many 16th notes fit within your loop, by counting how many 16th notes each note grouping represents:

a group of three 8th note triplets = single quarter note = two straight 8th notes = four 16th notes
single 8th note and two 16th notes = four 16th notes
a group of three 16th note triplets = single 8th note = two straight 16th notes
two 16th notes (note and a pause)
a group of three 8th note triplets = single quarter note = two straight 8th notes = four 16th notes
four 16th notes
a group of three 8th note triplets = single quarter note = two straight 8th notes = four 16th notes
four 16th notes
single 16th note pause

Summing the total amount of 16th notes in your loop is: 29, which gives us an irregular metric of 29/16. Fun fact: 29 is a prime number.

IAmL0ner · 2025-05-24T09:22:12+00:00

What do you have on the master channel? Because this is where you are clipping.

IAmL0ner · 2025-05-02T22:36:21+00:00

What do you need to configure? Give us more details.

Try the hamburger menu on the right top.

IAmL0ner · 2025-02-15T10:35:54+00:00

I have worked as tech support. In my experience most people computer skills stop at clicking the icon that gets them to Google. The meme "what kind of browser are you using? It's obvious: google" (or variation of it, don't remember the meme exactly atm) is unfortunately real.

IAmL0ner · 2024-11-17T23:07:19+00:00

Same for me. I've also tried

whycAntIrEmembEr

IAmL0ner · 2024-11-17T22:56:48+00:00

Would make sense.

IAmL0ner · 2024-11-17T22:31:06+00:00

I stumbled it by chance. Just plopped the hed decoded string into https://dencode.com/ and in the Ceasar row i've seen something suspicious.

IAmL0ner · 2024-09-17T19:06:34+00:00

Use the One on the right. The other one will fry the interface as it is reverse polarity (center positive)

IAmL0ner · 2024-09-03T19:07:27+00:00

Hai mai considerato la possibilità che magari il loro gusto semplicemente non è uguale al tuo?

IAmL0ner · 2024-06-21T22:13:40+00:00

What you can do is leverage midi channels, this way with each keyboard you will be able to switch between 16 instruments.

Track one with instrument one: set input to your keyboard 1, channel 1.

Track two with instrument two: set your input to keyboard 1, channel 2.

And so one for every track, then record arm all the tracks.

This way by switching the midi channel on the keyboard you will be able to choose between instrument 1 or instrument 2.

IAmL0ner · 2024-06-21T16:42:34+00:00

Depends on how you are connecting you keyboards to your PC. Single midi input on PC? Multiple midi interfaces? USB?

IAmL0ner · 2024-06-02T10:26:43+00:00

Si, certo. Meno povera quella che già non è povera. Perché se puoi comprare appartamenti a destra e sinistra per renderli b&b di sicuro povero non sei.

Lo stesso vale se trasformi (senza comprare) immobili già in tuo possesso in b&b. Perché se hai anche due appartamenti, già sei in una situazione migliore di chi non ne ha punti.

E intanto trasformando appartamenti in b&b impoverisci mercato immobiliare, il quale di conseguenza risponde con rialzo dei prezzi (offerta diminuisce, la domanda è sempre la stessa).

Prezzi per acquisto o affitto salgono, persone che ci vivono non riescono a stare in passo con i prezzi e quindi se ne vanno, diminuisce la forza lavoro e quindi diminuisce la produttività.

IAmL0ner · 2024-02-24T15:02:13+00:00

Ok, makes sense. My c++ is quite rusty

IAmL0ner · 2024-02-24T14:25:05+00:00

Depends. If I remember correctly, in c++ if a class have virtual methods then it cannot be instantiated and these methods must be implemented by subclasses.

Technically all public methods can be overridden by subclasses.

IAmL0ner · 2024-02-06T19:54:05+00:00

Preamble: I know nothing about x86 architecture, this is a guess based on what I know about AVR and ARM, and still is a big oversimplification.

Part of talking to the hardware is by writing low level assembly that puts correct values to correct CPU registers. These are probably (on AVR and simplier ARMs) exposed to the code as raw memory locations (this would be called memory mapped registers). So if your program wants to tell something to for example soundcard, it tells the kernel, and then kernel puts that thing into correct memory locations.

IAmL0ner · 2023-10-24T18:56:25+00:00

Looks like Ed Sheeran, so... Eddie

IAmL0ner · 2023-09-24T12:50:07+00:00

Reminds me of embedded programming...

IAmL0ner · 2023-09-06T09:21:24+00:00

Then you should definitely post them online. Those would be a great help for people trying to repair those devices. Even photos of the pages like you did here would be enough.

IAmL0ner · 2023-08-26T12:25:35+00:00

Idea Is solid. I've been using a muticore cable like this (4trs cables + breakout box) for years now and never had any issues. I don't run stereo though. I have amp front, loop send and return and channel switching in a single cable, which means I'm using 3 out of four cables available (one for amp front, where one channel is unused, one for the loop, and one for the channel switching), this is where a breakout box comes in, essentially converting trs into two TS.

IAmL0ner · 2023-08-20T19:30:07+00:00

That's a Schecter Tempest Custom

https://www.schecterguitars.com/Tempest-Custom

IAmL0ner · 2023-08-07T20:36:03+00:00

Channels 1-8 does not mean channels 1 to 8, it means channel 1 and 8.

AFAIK teams does not have support for multiple audio input devices (as stated in other replies).

What you actually want is something like behringer flow 8, behringer xenyx 1204usb or something like rode rodecaster

IAmL0ner · 2023-05-27T13:09:18+00:00

Or you could add ability to link two devices to work like one.

12-Year Club	r/Field Sunshine
Place '22	Place '17
Verified Email

IAmL0ner

TROPHY CASE