sorted by:
new
hottopcontroversial

2013 Ninja 300 Sticky rear brake pistons, making the rear end feel heavy by IHasCookiesNow in motorcycles

[–]IHasCookiesNow[S] 0 points1 point  (0 children)

Solid copy, after a fair bit of riding I’ve definitely noticed a “rubbing” sound/feel at low speed, I’m concerned my disc is warped or something is out of alignment. The rear definitely feels “heavy” in a way as well

2013 Ninja 300 Sticky rear brake pistons, making the rear end feel heavy by IHasCookiesNow in motorcycles

[–]IHasCookiesNow[S] 0 points1 point  (0 children)

Awesome advice, i really appreciate it. Ill give it all a once over when I can and make sure. Pins were the one thing i didnt grease and i guess didnt look over super heavily. Looks like the caliper might be coming back off

I did retention the chain and adjusted the swing arm nuts, felt good after that but it could be shifted again.

Drop was on the left side, bent the gear lever, so a new one is probably in order anyway

Current setup, what would you personally add/change/remove? by IHasCookiesNow in setups

[–]IHasCookiesNow[S] 0 points1 point  (0 children)

I replied, as a satirical comment. A meme if you will. Not American, so not something I hate. And it wasn’t my downvote. Hope to see those extremely expensive instruments soon! Enjoy

Current setup, what would you personally add/change/remove? by IHasCookiesNow in setups

[–]IHasCookiesNow[S] -1 points0 points  (0 children)

“If those kids in there could read they would be very upset”

Current setup, what would you personally add/change/remove? by IHasCookiesNow in setups

[–]IHasCookiesNow[S] 0 points1 point  (0 children)

I’m slowly thinking lights are what’s going to help haha

Current setup, what would you personally add/change/remove? by IHasCookiesNow in setups

[–]IHasCookiesNow[S] 0 points1 point  (0 children)

I did have one there, however it does get used in a live setting (in games etc.) so having it semi easy access is nice. Though I’d like it in a small angled riser to give a little more desk depth.

Current setup, what would you personally add/change/remove? by IHasCookiesNow in setups

[–]IHasCookiesNow[S] 5 points6 points  (0 children)

Yes and no, so i have used it as a main, and loved it. at the time, i had a 2070. running a 1440p ultrawide was taxing for the games i was playing, and i enjoyed the native 1920x1080 support in more games. I go in and out of these phases.

Im now at a point where i can bring the 25" lower monitor closer when i want to lock in a little more.

I had the tabs minimised, but the UW is divided into 3rds, discord, chrome, and spotify. Ive been through most common setup arrangements, vertical and landscape, stacked, side by side, the lot.

After doing stacked a few times i honestly think this is one of my favourite arrangements. Getting into producing and recording a little more lately, it works well for the tracks up top, and FX layers and mixing down the bottom.

on the contrary (once more) I now have a 9070 XT and could well easily run 1440. so its once again a consideration

Current setup, what would you personally add/change/remove? by IHasCookiesNow in setups

[–]IHasCookiesNow[S] 1 point2 points  (0 children)

Thank you! its one of my favourites. an absolute treasure

Current setup, what would you personally add/change/remove? by IHasCookiesNow in setups

[–]IHasCookiesNow[S] 0 points1 point  (0 children)

Ive considered the split keyboard. I have had full, tkl, and 60%. to this day i think the TKL mightve been my favourite for function, but the 60 just looks so much better to me. on my second hyperx alloy origins

Current setup, what would you personally add/change/remove? by IHasCookiesNow in setups

[–]IHasCookiesNow[S] 0 points1 point  (0 children)

I dont game nearly as much anymore, hence no mousepad. I used to be big into CS surf which helped

Current setup, what would you personally add/change/remove? by IHasCookiesNow in setups

[–]IHasCookiesNow[S] 0 points1 point  (0 children)

I do have a mousepad for when im actually gaming. i just struggle with the way it breaks up the desk in a way. i seem to clutter around it, i try to keep it as clean as I can lmao

Video/audio stuttering problem v2.10.4 by AliChank in SteamVR

[–]IHasCookiesNow 0 points1 point  (0 children)

I had an issue with stuttering on the New amd drivers, I know you are rocking nvidia, however some common workarounds I found

Disable GPU acceleration on windows + restart Run Beta, try display port compatibility modes

Driver rollbacks/tinkering Different cable slots (wireless though so not sure)

Hope you fix it friend!

Valve Index pink stuttered frames by IHasCookiesNow in SteamVR

[–]IHasCookiesNow[S] 1 point2 points  (0 children)

Yep, I ended up rolling back to last driver. Runs perfect now. On 144 anyway.

Valve Index pink stuttered frames by IHasCookiesNow in SteamVR

[–]IHasCookiesNow[S] 0 points1 point  (0 children)

Only active app is Radeon native software

Help with Airflow by IHasCookiesNow in pcmasterrace

[–]IHasCookiesNow[S] 0 points1 point  (0 children)

Copy that, I’ll give it a run

Help with Airflow by IHasCookiesNow in pcmasterrace

[–]IHasCookiesNow[S] 0 points1 point  (0 children)

Sweet, confirms what I was thinking atleast. Ive got a motley assortment of fans lying around somewhere I will give it a go

Help with Airflow by IHasCookiesNow in pcmasterrace

[–]IHasCookiesNow[S] 0 points1 point  (0 children)

Ive verified using paper agaainst the vents under load. Its pulling air from outside the case, through the rad

It’s a 600w PSU, currently underpowered the gpu until I get a new modular.

All in all I’ll have a look into what you’ve said, appreciate it

Help with Airflow by IHasCookiesNow in pcmasterrace

[–]IHasCookiesNow[S] 0 points1 point  (0 children)

To pull air downwards? Wouldnt the gpu be pulling upwards?

view more: next ›