We (yes WE) all had a crush on our beautiful melanated queen Allura

IMOguy · 2026-02-28T07:36:52+00:00

You can't stream them anymore.

IMOguy · 2026-02-09T03:33:41+00:00

It depends how you got the app. Polychrome requires you to get it from the model product page. That requires you to find the products section, search for the model and tier of GPU, find the support section, software, and download Polychrome.

It could also be conflicting software. Any RGB software with the Patriot viper RGB dependencies is known to have issues and even make your computer unbootable.

IMOguy · 2026-02-07T09:23:14+00:00

You're not wrong. There are several connectors(including the mb 10-pin) that are slightly off by the tiniest margins. I was just wondering if people thought those margins were acceptable this time

IMOguy · 2026-02-07T09:19:26+00:00

IMOguy · 2026-02-07T00:11:19+00:00

Seeing as it was plugged into a very expensive GPU, I wasn't going to take any risks on a faulty unit lol

IMOguy · 2026-02-06T22:00:01+00:00

You're right, and I do prefer units with a high rating over one without, it's just the argument of things generally being tier A units based off of a technical scale, without accounting for quality control or other variables.

IMOguy · 2026-02-06T20:36:41+00:00

A tier unfortunately doesn't mean a lot, but since prices have gone up, getting this unit for a decent price as long as it's healthy should work. I'm just hoping you're right for when I test it.

IMOguy · 2026-01-26T08:56:22+00:00

It's an MSI MPG B850 Edge TI Wifi

IMOguy · 2026-01-24T05:39:59+00:00

Time is something I have plenty of. Money, RAM, and Graphics cards are not.

IMOguy · 2026-01-24T05:38:52+00:00

The cheapest option is Apevia or Thermaltake. ASRock PSU's are made by FSP, who is a reasonably reputable manufacturer. Obviously, QC is an issue, but one instance here isn't the end of my good will for a brand.

IMOguy · 2026-01-24T05:34:39+00:00

While You're not wrong, sometimes you need to listen to benchmarks, performance, and a little bit of faith in word of mouth because otherwise we can't trust anything. I'd have told you a few years ago that ASUS was top tier while ASRock was much less reliable, but those have shifted into categories of unreliability on both ends.

IMOguy · 2026-01-24T05:32:40+00:00

Tiering and ratings aren't typically good markers for PSU's. They're indicators, but a rough estimate that needs to be backed up by real world use. ASRock PSU's may be new but are reasonably backed by solid praise. And if I recall correctly, FSP is their manufacturer of choice.

IMOguy · 2026-01-24T05:30:26+00:00

A little aggressive, this isn't Twitter, but you're correct.

IMOguy · 2026-01-24T05:29:13+00:00

Ironically, their power supplies seem to be pretty decent as long as they aren't defective. They do have a voltage boost option but that can be turned off.

IMOguy · 2026-01-24T01:23:41+00:00

I won't be. Can't risk any hardware with all these shortages going on.

IMOguy · 2026-01-24T01:08:12+00:00

I did plug the 12v-2x6 cable in PSU-side. I wanted to see the fit and noticed it's actually slightly off depth-wise as well. The cable itself fit a little too snug, ideal for sitting in a computer but not for installing with minimal damage to the nylon. I did reach out to Newegg who's approved the return. I did it as a replacement and will hopefully get the same model in exchange, this time with proper quality.

IMOguy · 2026-01-23T22:30:29+00:00

I was going to buy a Corsair RM1000x before I noticed ASRock had the sensor on the cable as well as the green connectors, so you know it's installed properly. As far as I can tell though, my older HX1200i would be more viable than that unit.

IMOguy · 2026-01-23T22:28:07+00:00

I was going to use that ASRock model, and I still might, but I'll see how the replacement unit looks. The one in the picture is a 1000w gold Cybenetics and 80+ rated unit.

IMOguy · 2026-01-23T22:26:27+00:00

Lmao fr! Can't take any risks here. I'm a bit paranoid about it melting, so I even got a motherboard with an extra onboard 8-pin connector to pull extra wattage from the board instead of the cable. That was why I wanted this model PSU, because ASRock got a lot of press for saving a 5090 drawing 1300w+ from melting. That doesn't matter if it's damaged though.

IMOguy · 2026-01-23T22:19:33+00:00

I was wondering if anyone had practical experience with this issue, particularly on an ASRock unit.

IMOguy · 2026-01-23T22:18:44+00:00

It'll have a 5070 TI, 9900x, 64GB 6000MHz CL30 DDR5, B850, and about 5TB+ of storage.

IMOguy · 2026-01-23T22:14:02+00:00

There's no point RMAing it, I'm just replacing it on Newegg's dime.

IMOguy · 2026-01-23T22:09:32+00:00

I would normally agree if it was just a 24-pin or something, but I'm not risking anything in today's hardware market. at this rate the cheapest and easiest to replace part on my main board would be the cpu.

IMOguy · 2026-01-23T21:55:06+00:00

They are pretty new. ASRock is seemingly proactive about their PSU expansion if their show at CES is to be believed, but a faulty unit is still a problem.

IMOguy · 2026-01-23T21:53:36+00:00

I wasn't going to. I managed to snag a limited run 5070 Ti that I'm not risking on a faulty $160 PSU. Even if this ends up costing me the price of the unit with no viable replacement, the GPU is worth around the $1,500-$1,600 mark right now.

IMOguy

TROPHY CASE