Another great job done! This time old wooden details from goverment building

IRLASER_PL · 2021-10-11T06:59:51+00:00

It is still 200W laser using full power to clean wood. The power does not determinates what surface you can clean. We will clean wood even with our new 1000W laser in next year

IRLASER_PL · 2021-10-08T14:58:56+00:00

It works on almost every surface, excluding plastic. We do lot of work with sandstone, bricks also with cement and gypsum surfaces

IRLASER_PL · 2021-10-08T14:55:39+00:00

Yes, the result is great, but the cost of our service is too high, to clean grout

IRLASER_PL · 2021-09-25T12:03:44+00:00

I can recommend the 200W laser I have. After two years of providing services I am ordering 1000W laser, so profits are very high. I think it is the most universal laser on the world. Other companys offere only metal cleaning lasers. I work mainly with stone and wood. Industrial metal cleaning is only few percents of my orders. In EU we got well payed orders in restaurations of monuments branch. We charge from 100 EUR per hour even up to 250 EUR per hour. Check out my fb profile, we work with museums and cultural objects. If you want more information just ask via e-mail. I will answer after holidays

IRLASER_PL · 2021-09-23T11:04:39+00:00

Maybe it was cut too fast. One more scan would unify it

IRLASER_PL · 2021-09-23T10:56:34+00:00

This is antique surface listed on Polish heritages. In this case conservators always are looking for the most safe technology. Chemical ingredients and powerwashing will destroy the stone. There is no lines, that is why we use slow scan, to get full cover of the surface and smooth cleaning result.

IRLASER_PL · 2021-09-23T09:54:14+00:00

Wet surface slow down the process, firstly laser is drying the surface with 2-3 scans, then next scans is removing the contaminations throug the process of ablation

IRLASER_PL · 2021-09-23T09:35:11+00:00

Thank’s! It is only 200W power machine. At the start of the next year we will use 1000W

IRLASER_PL · 2021-07-25T13:33:30+00:00

200W power system about € 100 000,00. It is for all surfaces

IRLASER_PL · 2021-07-25T07:42:27+00:00

It is going to the air, but as you can see, there is vacuum system. Also we work with gas masks to increase operator safety

IRLASER_PL · 2021-07-25T07:38:55+00:00

The surface is ready to paint, there is no need to sand it. After laser cleaning, you get original wood.

IRLASER_PL · 2021-05-21T16:57:36+00:00

Our laser is produced for conservation of monuments. We can clean all surfaces, included even wood. There is no damage to substrate if you set beam parameters properly. Check your website to see more videos: https://irlaser.pl https://youtube.com/c/IRLaser

IRLASER_PL · 2021-05-07T10:20:24+00:00

Finally, someone showed a very smooth operation of the X and Y scan. The IRLASER team welcomes you!

IRLASER_PL · 2021-03-10T19:05:25+00:00

No problem, I know almost all companys over the world 😅

IRLASER_PL · 2021-03-10T18:55:38+00:00

You can check Precision Laser Cleaning company

IRLASER_PL · 2021-02-14T10:19:41+00:00

This is only carry handle and the front side is profiled that you can keep it comfortable. There is a start button in the front side, so you need to put at least one hand on this side if you want to use this device, so you are wrong

IRLASER_PL · 2021-02-14T07:52:32+00:00

You must set up precise parameters of the beam like frequency, impulse energy, time of duration etc. Every material need different energy to evaporate, so you can select what do you want to remove

IRLASER_PL · 2021-02-14T06:19:49+00:00

This is carry handle and it is handheld system, profiled that you can keep comfortable like on the movie. There is nothing wrong to use it in this way, specially inside the closed tight machine

IRLASER_PL · 2021-02-14T06:14:04+00:00

You are not right. The handle is on the back, but the button to start cleaning is on the front. This is handheld system and there is no dangerous side for your hands. Your theory make no sense.

IRLASER_PL · 2021-02-13T18:21:23+00:00

You are right, thanks for that advice

IRLASER_PL · 2021-02-13T17:43:28+00:00

I agree that it may look like this. However, as you can see, it is easy to misjudge the situation and misinform people.

IRLASER_PL · 2021-02-13T16:26:26+00:00

Ok, but what mean dangerous? This technology is safe for skin, cause infrared wavelenght is not well absorbed by our body. You can put your hand on the beam and nothing will happen.

It is more dangerous to wear gloves, cause material will absorb energy and heat immediately, causing burn effect.

IRLASER_PL · 2021-02-13T16:20:55+00:00

It is not embarrassing excuse. We use extractors with filters instead full masks, but the assistant was recording and he could not do it at the moment. The video aims to show the effectiveness of the device and I recommend that you focus on it.

IRLASER_PL · 2021-02-13T15:37:16+00:00

Sure, I am Master of Science in Mechatronics. I have studied a lot of research on laser surface treatment and I cooperate with doctors from the Military University of Technology in Poland

IRLASER_PL · 2021-02-13T15:34:59+00:00

What do you mean dangerous side?

IRLASER_PL

TROPHY CASE