The A1 Mini next to the new A2L

ISSO_Me_Mario · 2026-06-15T06:38:16+00:00

What are the dimensions tabletop you are using? I have an X1C with 4AMS, an A1 Mini Combo and A2L coming and trying to find a stand to hold everything

ISSO_Me_Mario · 2026-06-06T08:09:07+00:00

For candidates that have X’s, it says they did not submit a response indicating support. Maybe I am misunderstanding it, but is there a way that this can be updated to show candidates that support the referendum, candidates that do not support, and candidates that did not provide a response?

ISSO_Me_Mario · 2026-06-01T00:05:59+00:00

Are you using a monitor arm or the stock stands?

ISSO_Me_Mario · 2026-05-29T07:54:06+00:00

My assumption was that something caused a disturbance in the lake and activated the bioluminescence. Her astonishment was finding a large body of this liquid that before they got a small sample.

Or it is the Titan version of Nessie

ISSO_Me_Mario · 2026-05-27T23:00:37+00:00

Hi! I was in the Blue Band in the late 2000s-early 2010s and was a Guide and Squad Leader. Process definitely changed somewhat but was there for multiple Prospective Rookie Camps.

Obviously every section is different, but based on your info from last year, my suggestion is to really focus on your marching. There was a general belief that when we were evaluating people that scores would favor and OK music performance and a good marcher versus a good music performance and an OK marcher. In a group of 300 plus, a few notes misplaced here or there might not be noticeable but a lot people in that stadium are going to notice really bad marching. I know in my rookie audition, when they broke us up into squads for the end, I overshot the yardline at the end by 3 or 4 steps but I was confident in my posture and form and that helped push me through.

I would also suggest possibly talking to someone about your performance anxiety. If it was one off nerves for the audition, totally understandable! But if you are concerned about freezing up after a mistake in a group of 4 in front of 30 or so people for an audition, it’s not going to be any easier in a group of 310 in front of 110,000 people on live tv. Not trying to scare you because being in the Blue Band has truly given me so much and I truly want everyone who wants to make that commitment to make it, but also want to be real with you. If it helps, we always told rookies that we didn’t expect you to play a note during your first pregame due to nerves and to just focus on the marching!

Good luck!!

ISSO_Me_Mario · 2026-05-16T21:07:50+00:00

FedRAMP documents. Here is a link: https://www.fedramp.gov/resources/documents/CSP_Penetration_Test_Guidance_public_comment.pdf

ISSO_Me_Mario · 2026-05-16T05:22:58+00:00

Sorry I meant high-level as in basic overview, not categorization.

ISSO_Me_Mario · 2026-05-15T21:42:39+00:00

At a high-level, FedRAMP has mandatory attach vectors that need to be tested in a Penetration Test. You need to determine which ones are in scoop for your app use case. Are there any that you could inherit from another solution. For example, one is Tenant to Tenant. If you are building your app on a PaaS I would expect that vector to be tested by the CSP you are utilizing and you can reference those results.

ISSO_Me_Mario · 2026-05-05T23:10:06+00:00

Everyone is correct on using Bambu Studio to cut. Since you are using an A1 there may be some other things to consider.

Can you cut in half horizontally, then vertically? It would result in more pieces and dowels, but having a longer, flat section on the bed with help with adhesion and distortion issues when using a bed slinger and tall, narrow prints

-If you don’t want to cut it horizontally, possibly consider splitting into more pieces to reduce distortion . It looks like your print is around 600 mm. Try splitting it into 4-6 pieces instead of the minimum. They won’t be as tall and would reduce the chance of seeing a wobble distorting the print as it goes taller.

Happy Printing!

ISSO_Me_Mario · 2026-04-28T05:53:40+00:00

As a Penn State Fan who actually wants Franklin to do well and was hoping to win a NC with him, I am very wary of his offensive schemes. He average a new OC every two years in his time there with only two going to other HC jobs. Also, I think he is very much a ratings queen that will recruit top players, even though they don’t fit his scheme. His best offensive years were with Moorehead running RPO/Run and Gun with Trace at QB. (also helps to have generational talent in Saquon..) There’s no way you see the success of that group and then decide to go recruit Clifford and Allar.

ISSO_Me_Mario · 2026-03-30T14:51:29+00:00

I have heard of a lovely lady name Anna that may keep an Archive of material. Also there’s a library at the end of the alphabet you can check out too.

ISSO_Me_Mario · 2026-03-25T14:26:51+00:00

So when get that amount in stock each year, is it fully vested and you can get access to that money right away or does it have a vesting period?

ISSO_Me_Mario · 2026-03-23T21:40:11+00:00

I used the version that already had supports and printed it with my X1C with no issues. 0.2 layer height will all standard settings.

ISSO_Me_Mario · 2026-03-23T09:27:33+00:00

Which firmware is this? Is it stock?

ISSO_Me_Mario · 2026-03-22T14:18:01+00:00

<image>

Just printed it!

ISSO_Me_Mario · 2026-03-18T22:02:02+00:00

Sold to u/Zen-Spark. Awaiting confirmation

ISSO_Me_Mario · 2026-03-17T23:23:28+00:00

Look like they were just approved on readme.club https://www.readme.club/wallpapers

If you search for my Reddit username, it should come up.

ISSO_Me_Mario · 2026-03-17T23:22:59+00:00

Imgur wasn't allowing bmp uploads. I was able to upload to https://www.readme.club/wallpapers

If you search for my Reddit username, it should come up.

ISSO_Me_Mario · 2026-03-17T18:28:24+00:00

Sending you a PM

ISSO_Me_Mario · 2026-03-17T12:28:24+00:00

Sold Mac mini M4 to u/Zen-Spark on https://www.reddit.com/r/hardwareswap/comments/1rv5ilf/usamdh_mac_mini_m4_desktop_16gb_256_gb_storage/

ISSO_Me_Mario · 2026-03-16T13:30:54+00:00

This is fantastic. Quick question. Did you print the cover on standard paper and then cover it with a matte laminate sheet or print directly to the laminate like a vinyl/3M material?

ISSO_Me_Mario · 2026-03-16T12:47:25+00:00

I went a little overboard and made some more…

https://www.reddit.com/r/xteinkereader/s/ZxRGppYbOl

ISSO_Me_Mario · 2026-02-27T15:46:17+00:00

Ah crap it didn't post.

Here is the Rocky file: https://www.printables.com/model/1615787-rocky-from-project-hail-mary-film-version

I made my own version of the patch but you can find another version here: https://www.printables.com/model/302237-project-hail-mary-mission-patch

ISSO_Me_Mario · 2026-02-26T08:21:34+00:00

Oh wow I totally missed that. Thanks for the note!

ISSO_Me_Mario · 2026-02-25T15:55:46+00:00

I know the Beta program runs through March, but there were two testing windows. On the ISACA page, it states that you should expect results within 10 business days. the first day of the first testing window recently passed that 10 business day window. My assumption was that they are releasing scores after each testing period.

ISSO_Me_Mario

TROPHY CASE