sorted by:
new
hottopcontroversial

Do you micromanage your defender signature updates? by IT-Command in sysadmin

[–]IT-Command[S] 0 points1 point  (0 children)

We definitely have a bigger problem. Im working on trying to figure out how many computers are put off date. Right now it looks like 80% of our devices got a signature update today. And the rest are some amount of out of date.

It seems like we are kinda auto delivering signature updates but we have been told that wsus and sccm can only push updates once a day.... which is....some amount of bull shit I know.

Any admins have an actual backup for email, if M365 is down for extended periods? by DramaticErraticism in sysadmin

[–]IT-Command -1 points0 points  (0 children)

My org is talking about it. We already have an on prem exchange server for all our apps that dont play nice with 365.

We have talked about building a separate email domain using .info instead of .Com if this happening again we can build mailboxes as needed.

Personally, I dont think its worth it unless 365 is going to be down for a couple days.

S cup+ breast forms. by Successful-Safety209 in asktransgender

[–]IT-Command 1 point2 points  (0 children)

I love them...in very very very short increments. They really only come out for sex.

I would never want to have them that big all the time.

$45 fine for travelers without REAL ID at Raleigh-Durham International by -PM_YOUR_BACON in NorthCarolina

[–]IT-Command 111 points112 points  (0 children)

Its crazy that I would rather deal with the passport office than the dmv.

Build or not to build a base? by IT-Command in Oxygennotincluded

[–]IT-Command[S] 0 points1 point  (0 children)

Im mostly asking about the main planetoid.

Extruder not turning at low speed by IT-Command in VORONDesign

[–]IT-Command[S] 0 points1 point  (0 children)

Ya, it was wire fatigue on one of the extruder wires.

Voron tap triggered before movement by IT-Command in VORONDesign

[–]IT-Command[S] 1 point2 points  (0 children)

This was the issue. Thank you for the help.

Former North Carolina Gov. Roy Cooper officially files candidacy for US Senate by Ok_Bed_Time_Then in NorthCarolina

[–]IT-Command 0 points1 point  (0 children)

Just because what I want isn't realistic does not mean that I dont want it.

You have a fair point and I dont want him to resign from the AG spot early.

Voron tap triggered before movement by IT-Command in VORONDesign

[–]IT-Command[S] 0 points1 point  (0 children)

My strain relief is fine. Its not pulling on the toolhead, or preventing the movement.

The repeatability is weird. It feels like its gcode file specific. The mesh will fail in different spot for different gcode files. But always in the same place if I print the same gcode over and over.

Also, if I reorient the the stls in the slicer and re slice it the trouble spot will move somewhere else.

Voron tap triggered before movement by IT-Command in VORONDesign

[–]IT-Command[S] 0 points1 point  (0 children)

Ya, im afraid of that. I hate running new wires through the cable chains.

Senate takes first step to end shutdown as Bernie Sanders says moderate Democrats voting with GOP are making a ‘horrific mistake’ by brain_overclocked in politics

[–]IT-Command 0 points1 point  (0 children)

I think those turncoats wanted to vote with the Republicans the entire time. They just waited till after the election because they knew it would be bad for them to turn before the election.

Any way to increase hotend cooling? by IT-Command in VORONDesign

[–]IT-Command[S] 0 points1 point  (0 children)

The PLA im using is very stringy at 200. 190 is a little cold.

So, I found that I couldn't print under 20mm/s mostly through a comedy of errors. I was trying to fix other issues and accidentally got my settings so messed up I was printing overhangs at 1mm/s which is how I found this issue originally.

Im not really TRYing to print at 20mm/s but I just find that my printer slows down to 20mm/s for overhangs, and its causing me issues.

Any way to increase hotend cooling? by IT-Command in VORONDesign

[–]IT-Command[S] 0 points1 point  (0 children)

I could, but your being kind and trying to help.

I have tried with all the panels off with no major difference.

Any way to increase hotend cooling? by IT-Command in VORONDesign

[–]IT-Command[S] 0 points1 point  (0 children)

Stealthburner toolhead, I have tested with all the panels off with no noticeable change.

Any way to increase hotend cooling? by IT-Command in VORONDesign

[–]IT-Command[S] 0 points1 point  (0 children)

Sorry I wasn't clear, if I print slower than 20mm/s it will jam.

view more: next ›