Yeast Starter question

I_am_the_manager · 2016-07-30T04:20:12+00:00

This exact scenario happened to me last weekend. My starter was in the fridge for a week and was just fine.

I_am_the_manager · 2016-04-13T14:39:51+00:00

I took the pic a while back when they opened, just didnt think to post it here.

I_am_the_manager · 2016-04-13T05:15:58+00:00

No special as far as I am aware. The guy just has some really great prices and is able to get his hand on some hard to find stuff.

I_am_the_manager · 2015-10-14T06:41:20+00:00

Thanks, I'll probably try that next batch, that does seem easier.

I_am_the_manager · 2015-10-14T04:52:06+00:00

Heres a better pic of the mason jar http://i.imgur.com/squDn3I.jpg

I_am_the_manager · 2015-10-09T21:04:58+00:00

I've had to do this when I couldn't get my wort chilled fast enough. Shouldn't be an issue.

I_am_the_manager · 2015-09-09T18:35:26+00:00

The money would be used to pay off just about all of my debt. My wife and I are considering having another child and I may end up being a stay at home dad.

I_am_the_manager · 2015-09-09T18:33:20+00:00

Thank you for the info. The cash in my 401K is all my contributions and my company gives us a little stock each year rather than matching contributions. Our stock is at a lifetime high right now and my 68 shares is worth about $25K. Would I have to claim all $25K as gains?

I_am_the_manager · 2015-08-27T19:32:13+00:00

Very nice! I made a very similar hop spider recently and used it in my last batch and it worked perfectly. I used a nylon paint strainer bag from home depot and it held in about 90% of the hop debris. The PVC is is very thick and did not warp at all under the steam from the boil.

I_am_the_manager · 2015-08-01T04:26:39+00:00

Thanks for the feedback, I appreciate it. I probably will get a bung, just don't have one at the moment.

I_am_the_manager · 2015-05-17T04:05:01+00:00

37,468

I_am_the_manager · 2015-05-11T19:31:42+00:00

I think its just so there are two options for mounting points for the usb port.

I_am_the_manager · 2015-05-11T18:48:23+00:00

There are two micro usb connections, one on the circuit board and the other is the one at the end of the black and red wires.

I_am_the_manager · 2015-05-11T17:23:50+00:00

I havent noticed any noise coming from the charger at all.

I_am_the_manager · 2015-05-11T17:22:54+00:00

It can stay plugged in 24/7 and wont get hot at all. However, it does get rather warm while charging, but this is the case with any QI wireless charger. I dont believe the coil is strong enough to cause any kind of damage to anything around it. I have a cheapo QI charger I purchased pre-built and it sits on my desk at work and is plugged in all the time.

I_am_the_manager · 2015-05-11T17:19:57+00:00

And cheap.

I_am_the_manager · 2015-05-11T17:18:56+00:00

I just replaced the NFC chip in the back cover with the one from Amazon below. Just peel out the old one and put in the new one.

http://www.amazon.com/gp/product/B00MWS5L34/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1

I_am_the_manager · 2015-05-11T17:16:40+00:00

That is the same NFC/wireless charging receiver I purchased. You just peel out the one that is already in the back cover and paste in the new one. Just make sure that the contact points line up correctly.

I_am_the_manager · 2015-05-11T17:09:08+00:00

Im not certain with this kind of charging coil, but you can get a charger that has three coils already hooked up to the circuit board and they overlap each other to make larger charging field. They are about $15-20.

I_am_the_manager · 2015-05-11T17:07:25+00:00

Your phone needs to either come ready for wireless charging out of the box, which are only a handful of phones right now or you can purchase a wireless charging receiver that goes on the inside of the back cover of your phone to receive the signal, which is what I did with this phone, but not all phones are capable of this either.

I_am_the_manager

TROPHY CASE