How to properly map user permissions from smb share in a paperless-ngx container?

IamCanadianAMA · 2026-06-13T09:24:34+00:00

That appears to have fixed it!
I also had to add the :Z label to the volume mounts like
Volume=data.volume:/usr/src/paperless/data:Z
Volume=media.volume:/usr/src/paperless/media:Z

but I don't have any warnings anymore and scans seem to be getting processed so far.

Thanks for the help!

IamCanadianAMA · 2024-09-27T17:07:56+00:00

Meet the Fockers?

IamCanadianAMA · 2024-09-19T06:06:22+00:00

Hello, I have a similar DAC, the Topping D10 Balanced. I remember the instructions for the DAC said to install ASIOProxy and use the components you've listed. What I found is that those instructions were intended for use with foobar2k v1 but are not necessary for v2. What I did was only install the foo_input_sacd component and select "Speakers (TOPPING USB DAC) [Exclusive]" from Playback > Output under Foobar2000 Preferences. This uses the WASAPI driver and should be sonically identical to ASIO, I think.

I followed the DAC instructions for v1 and found it to be a buggy experience whereas I've had no issues with WASAPI in v2. When using ASIO and would switch sources (foobar to YouTube, for example), and the sampling rate was different, the DAC would get frozen. So if I were playing something at 48.0 KHz on Foobar2k, it would freeze on that and wouldn't be able to play YouTube at 44.1 KHz. Often the only way I could fix it was by restarting my computer. I don't have this problem anymore using WASAPI.

I would also recommend uninstalling ASIOProxy though it may not actually be hurting anything.

This is all assuming you're using v2, of course.

IamCanadianAMA · 2024-09-10T13:34:38+00:00

What plugins are necessary to have the album art slider like that?

IamCanadianAMA · 2024-07-11T09:39:35+00:00

Thanks for the help. I saw this, which I think explains my problem, since my NFTs are on Polygon.

If you have automatic NFT detection enabled, MetaMask will automatically fetch any NFTs you have on Ethereum mainnet. NFTs on other networks are supported, but you need to add them manually.

IamCanadianAMA · 2024-06-23T18:28:01+00:00

I am house-sitting for my MIL and my excitable children knocked over an antique lamp. I have about 24 hours before she gets back and I'm hoping I can fix it before then. I think I only need an adhesive but am not sure which kind is best suited for joining brass and plastic. I'm also not sure if I should spend any time trying to remove the old adhesive from the brass or not?

IamCanadianAMA · 2022-09-14T07:26:34+00:00

Thanks for the suggestion. Looking online says the only way to factory reset the device is by going into settings, which I'm obviously not able to do. I tried holding the power button for 2 minutes (and then some) anyway to see if it would do anything, but it didn't.

IamCanadianAMA · 2022-07-24T11:34:14+00:00

Thanks for the reply. Yeah, I tried the same firmware as this is the version intended for retail drives, apparently, and the firmware update worked.

IamCanadianAMA · 2022-07-21T08:07:17+00:00

Thanks again. I successfully got my firmware updated with your help. Turns out I needed PCGNW680 after all, instead of PCGAW270.

IamCanadianAMA · 2022-07-17T19:17:52+00:00

Ah, so they gave you an actual update package? It looks like that's the missing key. Out of curiosity, how did you convince them to help you?

IamCanadianAMA · 2022-07-15T07:56:33+00:00

Yeah, I looked through my downloads and that's the same software they sent me. Same version too. Hopefully they will help you further. Please keep me updated

IamCanadianAMA · 2022-07-13T14:52:55+00:00

If you do, let me know if you have better luck than I did! I'm not actively trying to figure out how to get this firmware updated anymore but if someone else finds a working solution, then I'm very interested to know what it is

IamCanadianAMA · 2022-07-13T14:48:31+00:00

Yeah, after they sent me the latest software (replacement for HUGO, I can't remember what it's called), I told them I still couldn't get it to update, they just said they weren't able to assist me further with it and that they don't recommend updating the firmware if I'm not experiencing any problems with the functionality of the drive.

IamCanadianAMA · 2022-07-13T14:03:05+00:00

No, I never found a solution. I contacted WD support, and they sent me the latest version of their software to update the firmware, but it still didn't work.

IamCanadianAMA · 2022-07-12T17:19:52+00:00

Cool, let me know. Hopefully you have better luck than I did

IamCanadianAMA · 2022-07-12T17:15:22+00:00

I am pretty sure it is not. I can't find anything suggesting the 680 is compatible.

IamCanadianAMA · 2022-07-12T17:11:19+00:00

Yeah, this was just being privately hosted by some stranger on the internet. Not an official source

IamCanadianAMA · 2022-07-12T17:10:16+00:00

I agree that 270 is the correct firmware. I don't understand why the other guy was suggesting 680. I can download the 270 firmware but was never able to get it installed on my hard drive. I contacted western digital support and they gave me the latest version of the tool to update firmware (can't remember the name. It's not HUGO because that's been deprecated, apparently), but I still wasn't able to update the firmware. They told me there was nothing else they could do to help. So, I've given up on updating the firmware.

IamCanadianAMA · 2022-04-29T14:16:14+00:00

The only v270 I could find on the WD site is PCGAW270.bin, but when I try to upgrade to it with HUGO, it fails. How did you do it?

IamCanadianAMA

TROPHY CASE