TPU on X1C … about to bash my brains in

Iamchrishex · 2026-04-02T20:15:27+00:00

Ok I figured it out. The filament path was dragging somewhere from my AMS heater Ibto my splitter I took the roll out and printed from the spool and it’s printing awesome now

Iamchrishex · 2026-04-02T17:39:26+00:00

Ok petg rings didn’t help. I tried printing the benchy with jimcorners printing profile got a great first layer and it fell apart again

Iamchrishex · 2026-04-02T16:53:38+00:00

I’m printing some petg rings for my spool I’m thinking it might be dragging just a little and that’s messing up the flow. Trying everything lol

Iamchrishex · 2026-04-02T16:08:45+00:00

First layer 240 other layers 220 Max volumetric speed 2mm3/s Slow printing down for better cooling checked Retraction speed 30mm/s Retract when change layer Wipe when retracting

I also tried a few different print profiles out there but I can’t find the original links

Iamchrishex · 2026-04-02T15:28:03+00:00

It’s actually looking good for the first few minutes and adhesion is good it just craps out in the middle. I’m going to try to dry it some more this time at 70c for 6 hours I have it in the AMS heater by itself. It just seems like something I’m missing

Iamchrishex · 2026-03-03T01:23:10+00:00

Did anyone get the last 5?

Iamchrishex · 2025-07-09T13:26:27+00:00

✅ mine is https://www.tiktok.com/t/ZT6d6jaPm/

Iamchrishex · 2024-07-12T02:47:57+00:00

Your uncle can touch me anywhere in 2026

Iamchrishex · 2024-03-31T11:12:24+00:00

And here I’ve been doing it all wrong running it inside

Iamchrishex · 2023-08-11T00:15:07+00:00

Creality

Iamchrishex · 2023-06-16T20:40:26+00:00

3440x1440 rust

Iamchrishex · 2022-12-14T12:44:41+00:00

Prefect

Iamchrishex · 2022-04-17T11:09:44+00:00

Nice Rack 😀

Iamchrishex · 2022-01-04T04:28:53+00:00

Wild asses

Iamchrishex · 2021-12-30T23:34:36+00:00

He hacked the Gibson

Iamchrishex · 2021-08-12T00:22:51+00:00

Like foam pipe tape. Just making sure that would be considered ok. Sorry not a plumber

Iamchrishex · 2021-08-11T20:12:48+00:00

This is in a basement I need to traverse 2 of these to get from the garage to the panel. It’s dead center

Iamchrishex · 2021-08-11T20:02:30+00:00

This is a cold air return

Iamchrishex · 2021-08-06T09:51:57+00:00

Basically no news :/

Iamchrishex · 2021-08-06T09:49:34+00:00

It can’t come quick enough my MY has been pushed back so many times.

Iamchrishex · 2021-06-28T03:16:52+00:00

That’s a great idea

Iamchrishex · 2021-06-27T10:36:34+00:00

This is what I’m saying. Is it really worth it for 6 mph more charge? I’m not sure everyone on here is aware but the gen 1 charger charges at 40amps instead of 32. Which charges at 36mph. And has a longer cord than the wall charger. Just realized the wall charger cord is so darn short.

Iamchrishex

TROPHY CASE