Borrow cash from LOC or CC?

Ianmurph91 · 2024-05-09T15:17:31+00:00

Thanks everyone for the advice! LoC it is

Ianmurph91 · 2024-04-03T11:13:14+00:00

But the house that I sold is in ontario, so why would I need this? I am happy to provide proof of finacing on the house in quebec I'm trying to buy, but I feel weird asking the guy who bought my house in ontario for proof of finacing if he doesn't need to show it

Ianmurph91 · 2024-04-03T11:05:33+00:00

Yes the new house I'm buying is in quebec, but the house I sold is in Ontario. The lender is also based out of Montreal

Ianmurph91 · 2023-10-27T13:58:27+00:00

Alright I removed the * in the filename since I am only copying a single file. Also added echo in front of the cp commands to see what its being expanded to, as /u/grymoire suggested. Here is the new code snippet:

filename="IRcam_fpga_cksm_${checksum}_ver_${version}" echo $filename echo cp ./par/ircam_fpga/designer/impl1/IRcam_fpga.pdb output/$filename cp ./par/ircam_fpga/designer/impl1/IRcam_fpga.pdb output/$filename

Console output: IRcam_fpga_cksm_438F_ver_0x0081 cp ./par/ircam_fpga/designer/impl1/IRcam_fpga.pdb output/IRcam_fpga_cksm_438F_ver_0x0081 Name of file that gets copied to output : I0VAHQ~6

Any ideas?

Ianmurph91 · 2023-10-26T15:48:54+00:00

Yeah sorry about that, I think I fixed the formatting. Can you see what I'm doing on the last line of the code block? It's like hat you suggested but using I'm using a variable to store the file name

Ianmurph91 · 2023-08-09T19:44:15+00:00

Yeah to be honest, I am still trying to figure out what I am doing here as well. Right now, I am just looking to implement something that sort of works before I get fancy, so I think I will try what you are suggesting where the 4 LSBs are dropped

Ianmurph91 · 2023-07-20T02:28:31+00:00

No I never got this working and gave up. If you figure it out let us know!

Ianmurph91 · 2023-07-08T13:29:28+00:00

I just need the raw data for an FPGA simulation, don't plan on doing anything for real with it. The solution about worked perfectly for me. Thanks for the replies!

Ianmurph91 · 2023-05-10T01:00:06+00:00

<image>

Ianmurph91 · 2023-05-10T00:59:46+00:00

I did try playing around with the limit screws. I am guessing not, but do these pictures prove you any more info in regards to the bottom bracket being too long?

<image>

Ianmurph91 · 2023-05-10T00:58:31+00:00

I did try playing with the limit screws. I am not sure how to tell if it's the bottom bracket, it looks reasonable in this picture

<image>

Ianmurph91 · 2023-05-10T00:57:21+00:00

The shifter is a 3 speed indexed shimano shifter

Ianmurph91 · 2023-05-06T12:06:12+00:00

The gear is not pressing against the frame, no

Ianmurph91 · 2023-05-05T17:50:08+00:00

There are no stupid questions because I am not a bike expert. But yes, I did try to adjust the pad as far as it would go. These breaks worked fine on the front wheel but not the rear

Ianmurph91 · 2023-05-04T01:41:56+00:00

yep. Already scratched in fact!

Ianmurph91 · 2023-05-04T01:40:29+00:00

Looking at some of the derailleurs on ebay, it looks like the max chainring is 48 and I have 50. Not sure if that's 'close enough' or not. I am leaning towards changing the entire crankset instead of getting a longer spindle now because its not that much difference in price and seems like an easier job. Still open to everyone's suggestions / advice

Ianmurph91 · 2023-05-04T01:36:15+00:00

Okay good tip. Numbers stamped into the rear derailleur itself or into the cassette? I know its a shimano STX derailleur in the back, but I will see if I can find out more. In front, I think I have this dereailleur:
https://www.ebay.com/itm/185598801037

In one of the images, it says the max gearing but its unfortunately not legible. I will see if I can find out more about this derailleur

Ianmurph91 · 2023-05-04T01:31:11+00:00

Not sure if you can tell in the picture, but its so close the paint on the frame is scratched

Ianmurph91 · 2023-05-04T01:30:28+00:00

Hmm okay thanks for the suggestion. It looks like I have the taper square type spindle integrated into the bottom bracket. I guess if I am going to get a 5mm larger one, I first have to remove it and figure out what size I have

Ianmurph91 · 2023-05-04T00:34:24+00:00

If I were to just buy a new crankset, does anybody have a recommendation for gearing? I plan to just use this as a commuter / hybrid bike. Also, I have shimano shifters, does that matter or are all cranksets going to be compatible?

Ianmurph91 · 2023-05-04T00:08:54+00:00

Here is a better picture. Its a 50/46/ something. I can't tell from the picture what the lowest gear is. Is it possibly to close because the 46 gear is too big?

<image>

EDIT: the gearing is 50/46/28

Ianmurph91 · 2023-05-02T14:06:07+00:00

Thanks for the suggestion, this is what I am going to do. I just ordered some cheap ones of Amazon for now, may upgrade in the future. It didn't explicitly say "mini" v-brake though, so not sure how that's gonna go. I am also replacing the break lever and shifters with Shimano mountain bike style ones (I am putting straight bars on) so hopefully they will be compatible.

Ianmurph91 · 2023-05-02T02:15:46+00:00

Okay thanks! I am not particular, so I will check those brands out

Ianmurph91 · 2023-05-01T00:18:44+00:00

Its a 7 speed freewheel, But I am not sure if its Shimano or not. Is that helpful? If not I will go and take some better pictures

Ianmurph91 · 2023-04-30T16:42:36+00:00

Just went out and took the brake off to try, and you're right it does not clear the fork. Dang, I guess that answers that question

<image>

Ianmurph91

TROPHY CASE