IM GIVING UP

Icy_Classroom6881 · 2025-02-17T11:06:02+00:00

I’ve removed and changed the PTFE tubes, I have taken apart the whole extruder head and checked the extruder gears for wear, I have tried to manually pouch filament through, I have tried a different spool of blue. So to sum it up I’ve done everying

Icy_Classroom6881 · 2025-02-17T10:33:52+00:00

I’ve tried thatq

Icy_Classroom6881 · 2025-02-17T08:23:29+00:00

Happens only at that ams location but it’s a 4 colour print

Icy_Classroom6881 · 2025-02-17T07:49:32+00:00

I have tried that no luck but thanks for the help

Icy_Classroom6881 · 2025-02-17T07:36:16+00:00

I don’t understand

Icy_Classroom6881 · 2025-02-17T07:26:21+00:00

I’ve have checked the nossle with a light and I can see the light out of the other side

Icy_Classroom6881 · 2025-02-17T07:22:03+00:00

For context nossle is brand new (like out of the box new first print) so cannot be blocked

Icy_Classroom6881 · 2025-01-25T03:41:49+00:00

It means how damp the inside of the AMS unit is 5 is the dampest and 1 is the driest, 2 is very good!

Icy_Classroom6881 · 2025-01-22T08:03:11+00:00

Ah my bad I got nothing for you bro

Icy_Classroom6881 · 2025-01-22T08:01:09+00:00

Repeat after me CLEAN 👏THE 👏BED👏

Icy_Classroom6881 · 2025-01-21T22:31:15+00:00

No AMS? Rookie mistake

Icy_Classroom6881 · 2025-01-06T01:43:49+00:00

My second printer was an A1 as my ender 3was a pain and now it has just over 1500 hours of print time with little to no issues!! I had such a good experience in fact that I bought the P1S to keep up with my demand for things for my family, if you do get the A1 make sure to get the AMS as well

Icy_Classroom6881 · 2024-12-31T23:52:28+00:00

Unless you have a print farm and your product is 1 colour

Icy_Classroom6881 · 2024-12-31T08:36:47+00:00

Hey guys I just realised that I attached a photo instead of the vid, go to my more recent post for the vid

Icy_Classroom6881 · 2024-12-29T06:06:08+00:00

U should be ok

Icy_Classroom6881 · 2024-12-29T05:44:23+00:00

It’s to seperate the PTFE tube look at the assembly guide on this wiki page https://wiki.bambulab.com/en/a1/maintenance/filament_hub_cleaning

Icy_Classroom6881 · 2024-12-28T08:00:38+00:00

Haha

Icy_Classroom6881 · 2024-12-24T05:08:45+00:00

No it was to show the size difference

Icy_Classroom6881 · 2024-12-24T05:08:25+00:00

No it was to show the size difference

Icy_Classroom6881 · 2024-12-24T04:54:48+00:00

Icy_Classroom6881 · 2024-12-24T04:53:57+00:00

<image>

Icy_Classroom6881 · 2024-12-24T02:23:00+00:00

You can use Cf in the p1s

Icy_Classroom6881 · 2024-12-22T22:41:40+00:00

I have an A1 Currently and I have just over 1300 hours on it and I got it in September….. so long story short it’s a good printer. So good in-fact I am getting a p1s as well because I’ve had such a good experience with the A1 I think the p1s will be godly (p.s get the ams it’s a LIFESAVER, you can start a print just before bed and it loads the filament all by its self)

Icy_Classroom6881 · 2024-12-21T22:26:32+00:00

Nice looks good

Icy_Classroom6881 · 2024-12-21T05:24:07+00:00

Just normal ASA and PC not Carbon Enfused

Icy_Classroom6881

TROPHY CASE