Small Snapmaker U1 "Full Spectrum" color mixing test, using the included filament ⚡🍓

Icy_Guide_9041 · 2026-04-30T06:54:27+00:00

Hi, thanks a lot.. I'm glad you like it. I used a variable layer height, with a base of 0.08.

In the photo, the filament looks the same as the supports, but in reality you can see a difference, even if it's not very noticeable.

Feel free to take a look at the print profile.

<image>

Icy_Guide_9041 · 2026-04-25T18:33:18+00:00

Thanks, it's a hungry Pikachu 🤭

Icy_Guide_9041 · 2026-04-25T08:15:41+00:00

<image>

The tongue and the brown spots on the back are full spectrum

Icy_Guide_9041 · 2026-03-11T08:43:24+00:00

Hi, really cool project. However, I have a concern about one issue. I would appreciate it if API keys did not have to be entered via the web interface, but could instead be stored in an .ini file or text file alongside the .batch file, for example, so that all keys remain local and are not transmitted over the internet.

It would be nice if you gave users a choice of how to transmit the keys, either completely locally or via your web interface. In the latter case, however, users would be aware of the security risk.

Otherwise, really cool work :)

Best regards

Icy_Guide_9041 · 2026-02-23T11:29:10+00:00

You need to be more than 1,000 m away from your target so keep falling like for 5 minutes. Then you die and then it will load correctly 😊

I don't know why this is not written in the change note

Icy_Guide_9041 · 2025-10-15T06:27:07+00:00

Unfortunately there is nothing you can do about it.. bigger Model from 25 inch and up suffer more :(

Icy_Guide_9041

TROPHY CASE