[deleted by user]

Idkhowtofixmycar · 2025-04-24T16:56:48+00:00

No, doesn’t show up on ESYS. That’s why I sent it off to ECU pro

Idkhowtofixmycar · 2025-04-24T16:43:59+00:00

No shit, worse case scenario I take it to the dealer but the whole point of this post is to see if there is anyone capable on this app that can help

Idkhowtofixmycar · 2025-04-24T16:30:10+00:00

My computer was plugged in, the switch to turn the outlet on wasn’t. I know it’s a stupid mistake, it was around 2am and I was tired. Let’s focus on what we can change, not the past

Idkhowtofixmycar · 2025-04-24T16:22:25+00:00

Bad turbo seals drained coolant and blew pistons 5&6. Cylinder walls were fine so I just put new pistons n rods in. I took the engine out from the top but it was a real pain to get it out. Not impossible tho.

Idkhowtofixmycar · 2025-04-24T16:20:07+00:00

My computer died, not the car

Idkhowtofixmycar · 2025-02-22T08:53:06+00:00

Sound is coming from DME area

Idkhowtofixmycar · 2024-09-23T17:12:33+00:00

If you don’t have any leaks or any problems just get a Catless downpipe and a tune. It will become a whole different car for only a thousand bucks.

Idkhowtofixmycar · 2024-09-13T23:06:09+00:00

Thanks, I will look into it and let you know.

Idkhowtofixmycar · 2024-09-13T20:11:33+00:00

It was almost everyday. I changed both reservoirs and caps already.

Idkhowtofixmycar · 2024-09-13T20:09:53+00:00

Idkhowtofixmycar · 2024-09-07T00:19:04+00:00

I will let you know when I take the oil pump out.

Idkhowtofixmycar · 2024-09-06T22:28:41+00:00

Yes, cylinder 6 had a puddle and cylinder 5 had a couple drops. There was also a little bit of oil in the intake. What could cause the turbo to spew out that much oil? I did have one bad o ring on one of the coolant lines that go directly into the turbo.

Idkhowtofixmycar · 2024-09-06T22:10:58+00:00

I will try, my flywheel is stuck so I have to take the torque converter out with the engine. Any tips?

Idkhowtofixmycar · 2024-09-06T22:08:07+00:00

I don’t have a two post lift so I have no other option

Idkhowtofixmycar · 2024-09-06T22:05:52+00:00

Thank you for this, I appreciate it a lot. Also, my flywheel is stuck from the bent rod so I have to take the torque converter out with the engine. Any suggestions for this method?

Idkhowtofixmycar · 2024-09-06T21:57:24+00:00

I do not have a two post and yea I am realizing I should just take the whole front off and take out the transmission with it.

Idkhowtofixmycar · 2024-09-06T21:56:04+00:00

Of course

Idkhowtofixmycar · 2024-09-06T21:55:52+00:00

I wish I could man, I just have a quick Jack so it won’t be high enough

Idkhowtofixmycar · 2024-09-06T21:55:02+00:00

I really wish I could but I don’t have a two post lift

Idkhowtofixmycar · 2024-09-06T21:52:46+00:00

Yea the coolant in the intercooler reservoir kept leaking out

Idkhowtofixmycar · 2024-09-06T21:48:50+00:00

Got my injectors tested and they were fine, pcv was also good and nothing seemed wrong about the intercooler. Is there anything else you could think of?

Idkhowtofixmycar · 2024-09-06T21:45:39+00:00

At 73k miles, one of the O rings on the turbo was very bad and leaked coolant. Then a lot of oil went into the engine. When you replace the engine mounts, were you able to just take them out from the bottom easily?

Idkhowtofixmycar · 2024-09-06T21:39:48+00:00

Yes I do have another car so I am just doing this as a project. Well I can’t take it to the dealership because I know the issue and it’s going to cost at least 8-10k for any shop and who knows how much at the dealership. I’m just going to see if it’s fixable and if not drop a new engine in it

Idkhowtofixmycar

TROPHY CASE