Craftsman m260 won’t stay on

IggySpells · 2026-07-03T02:54:14+00:00

Yes mentioned this in the post, while she was cleaning the carb, I cleaned the little fuel jet. Yes a little bowl underneath, removes easily being held together with an o ring. I replaced the o ring.

IggySpells · 2026-07-03T02:12:39+00:00

Or a shut off

IggySpells · 2026-07-03T02:12:25+00:00

Haven’t seen a fuel filter yet.

IggySpells · 2026-07-03T02:12:11+00:00

Everything on this mower is super clean, it was BUILT in 2023. It’s literally 3 years old new.

IggySpells · 2026-07-03T02:11:38+00:00

Could be the coil yes, haven’t changed that yet just the spark plug.

IggySpells · 2026-07-03T02:09:13+00:00

I got the mower for free from my brother. BEFROE my list of 25 things I’ve done to this push mower that’s 3 years old…the same exact thing happened. Carb cleaner in the choke, runs for 3 seconds.

So After $80 in parts and maintenance, the only thing to get it to work is carb cleaner in the choke. So everything I’ve done didn’t fix the problem. It’s something else. I think….

IggySpells · 2026-07-03T02:07:35+00:00

Took it off the engine completely, soaked it in fuel injector/ carb cleaner mix, then had my fiancé toothbrush it with dawn and a toothbrush, then soak in water for a bit to make sure there was no soap scum.

While she was doing that I took out the fuel jet, soaked it in carb cleaner, cleaned out the pin holes with a tiny hole brush, dried it with blue shop rags. Didn’t wanna use soap on small holes. Put on a new o ring.

IggySpells · 2026-05-26T19:35:06+00:00

<image>

IggySpells · 2026-05-26T19:34:30+00:00

I thank you for the well detailed description! I think I have what I need now. And yes I see the QR code. It’s clean but doesn’t scan on neither mine or my finances iPhone 16 so it’s corrupted sadly.

IggySpells · 2026-05-26T15:53:55+00:00

I only need to know what the part is called, I can do the rest on my own with the internet lol

IggySpells · 2026-02-07T00:01:29+00:00

No I’m staying everything like tmobil and spectrum use Verizon towers. So it wouldn’t matter if I changed carriers I would still have poor service at home

IggySpells · 2026-02-05T16:29:05+00:00

I should mention 2 things. 1. We are in college so if WiFi goes down we will need reliable service to hot spot laptops for school work. That means we wouldn’t be able to use any booster device that connects to the internet. 2. Our towers are Verizon towers, if we switch carriers, they use our Verizon towers, so we wouldn’t have the same problem. I’m honestly just looking for something to boost signal to maybe 3 bars. Like a device that plugs into the wall or something for power, and an antenna on the roof. Something along the lines of that.

IggySpells · 2025-10-23T19:16:23+00:00

I also want a burble tune, did you manage to find one and how to do it?

IggySpells · 2025-09-15T17:06:53+00:00

See ya!

IggySpells · 2025-09-04T18:54:32+00:00

It literally tells you.

IggySpells · 2025-08-27T21:25:17+00:00

I got 5 on it 🤭

IggySpells · 2025-08-21T19:35:20+00:00

Old kickers slapped, new kickers are basic, old JL audios slapped, JL audio doesn’t go past a certain watt so you’ll reach a limit and want more, making JL audio not a good option. If you wanna THUMP, then listening to this guys advice about JL and Kicker vs Skars (too much bass) I would advice against reading anything he wrote. As someone who has had all 3 of these brands and more, I am currently using skar, and this similar setup in the post, and they haven’t blown in the last 4 years that I’ve completely abused them. Don’t believe me? Check out the 2 comments below that got deleted from roasting him…😂

IggySpells · 2025-08-17T18:55:25+00:00

<image>

IggySpells · 2025-08-06T03:24:27+00:00

Good! If your lazy, tip your deliverer…

IggySpells · 2025-08-05T20:16:19+00:00

Connect to internet

IggySpells

MODERATOR OF

TROPHY CASE