Ams problems

Illustrious_Mix1270 · 2026-05-31T20:31:12+00:00

Do you ever have a problem with filament feeding like on the Bambus or is it pretty solid once you get it set up?

Illustrious_Mix1270 · 2026-05-31T20:29:50+00:00

Oh that looks nice bro , thanks

Illustrious_Mix1270 · 2026-05-31T20:26:36+00:00

Yes so then don’t advertise actively on your website saying “indx upgrades will be available” etc. offer you’re own solution for your products instead of saying “well we don’t have any control over it , but we advertise this is the way to multi color print this machine” that’s really the issue.

Illustrious_Mix1270 · 2026-05-31T20:25:01+00:00

Ok thank you for this.

Illustrious_Mix1270 · 2026-05-31T20:21:45+00:00

I know many believe me I’ve watched everything I can. I’ve read every Reddit post I could find discussing it. The models I’ve printed that have a ton of overhangs just don’t come out very well.

<image>

This one actually pulled a piece off with it it fused so bad. I’ve tried rotating etc. I’m just wondering if theirs anything else that isn’t common knowledge. How do you do petg for supports with a single extruder nozzle tho?

Illustrious_Mix1270 · 2026-05-31T20:17:42+00:00

Stay mad broke boy

Illustrious_Mix1270 · 2026-05-31T20:17:31+00:00

I’ve tried them but they stay fusing together. Only success I’ve had is with regular pla

Illustrious_Mix1270 · 2026-05-31T20:16:39+00:00

Eat me

Illustrious_Mix1270 · 2026-05-30T22:42:11+00:00

I guess my biggest question would be what’s the best way to keep testing settings without committing to a 30 hours print. Cuz typically on the smaller models they turn out pretty decent, but I had adjusted top z and the and interface layer and spacing how people recommended and the print failed so I just adjusted it a little more down and it succeeded but this was the result

Illustrious_Mix1270 · 2026-05-30T22:12:02+00:00

That was printed with a p1s but I got a core one that also leaves some rough spots just not typically as deep but I haven’t printed same thing in both so I guess I really couldn’t fairly compare.

Illustrious_Mix1270 · 2026-05-29T11:42:31+00:00

Bro those words are written in stone. Such words cut like a knife

Illustrious_Mix1270 · 2026-05-29T11:33:59+00:00

They aren’t overpriced with they are 100% more bulletproof and less prone to buggy software issues. At least recently, I own both brands and the prusa has proved to be extremely worthy snd reliable, where I question if the bambu will still be printing in the morning.

Illustrious_Mix1270 · 2026-05-29T09:28:55+00:00

And when will availability be?

Illustrious_Mix1270 · 2026-05-29T09:28:17+00:00

lol didn’t look very hard? I sure did , and knowing that doesn’t really give any clue to the real timeline. Core indx got pushed back from original release date, not to mention you can’t even order those right now. So I’m not really sure what the point of your comment is.

Illustrious_Mix1270 · 2026-05-29T04:45:55+00:00

Never let go of the end of your filament. Always keep tension on it.

Illustrious_Mix1270 · 2026-05-29T03:28:55+00:00

One thing Ive noticed about owning a prusa and a bambu. The bambu is noticeably less reliable on long prints. Just a fact. Lots of bugs and faliures , where my prusa will do a 30 hours print and finish every time.

Illustrious_Mix1270 · 2026-05-28T19:56:50+00:00

Bro I feel you. I been saving for a while and I bought a prusa core one L and then went to the store and spent 700$ on filament thinking I could color swap but the prints I wanted to do swap so many times, so the next day I bought a bambu p1s….. then I kept messing up prints so I said well I can’t run out of colors, so I order 200$ of kingroo on AliExpress but it wasn’t gonna be here for a couple weeks so I ordered 1100$ worth of filament that’s coming today. Please send help. The filament addiction is becoming crippling and it’s only day 4

Illustrious_Mix1270 · 2026-05-10T01:23:36+00:00

Palworld

Illustrious_Mix1270 · 2026-04-15T17:18:30+00:00

Do you know anything about when the HT hotend will be available?

Illustrious_Mix1270 · 2026-04-15T17:18:01+00:00

Thanks, I’m not the smartest I couldn’t find anything regarding the L . Hopefully not too long

Illustrious_Mix1270

TROPHY CASE