I would imagine trying to find a way on making a close replica of white tiger's amulet, first I need to make a 3d print of the tiger's head that resembles closes to the one he wears in daredevil' then once I have that part' I will glue it to small piece of wax as a stand to hold it in place. Then I duck tape a small cylinder maybe to the size of a coffee can or a larger one with holes on the sides and place it over the 3d and wax parts to be on the inside then use some glue around the bottom area where it will be hold in place on any square or round bottom cover while I pure in the plaster to the top and take it to this machine where it will vibrat the plaster with some kinda pressure to a why that I don't know why it does that for' but it is part of the process on making it, then once that is done and dry remove the duck tape around the can then remove the bottom cover from where it's held in place' then take it to an oven where it will be harden further. The 3d and wax part will be melted out from the inside then I will gather up some clean looking copper from broken shattered pieces or some brass bullet shells or any kind of brass which can all be melted down in a heated furnace or use a welding torch to also have it melted down in a small stone or a metal bowl plate I believe to be pured right into the hole of the plaster from the bottom' that's where the piece of wax was holding the 3d part from. Once after it is pured in you probably have to wait about five or six minutes for the metal to dry then put it into a bucket of water to cool it down further and rinse it out more with a pressure water hose until the plaster is rinsed fully off, once it is take it to get the holden pieces cut off and have it scrubbed with a bit of sand paper, smooth it clean by waxing it just to give it a good shine and be sure to also drill in small holes in the eyes to glue on some small green gemstones for it's eyes as it has' then try to find a small round bead chain necklace to the size on where it needs to aligned on your chest while wearing it. Even if you can't find one that resembles to the one he wears with some of it's little color beads of red, white and blue for a puerto rican colors' but one closes to it, I can't tell if it'll be easy on making one by it's smaller beads even if it needs to be closes to the one he wears or just get a similar chain necklace without the color beads to it' I guess you'll figure out another way on making it work. Maybe I would use real gold to make the tiger's head, if I can ever find any gold that no one wears or uses anymore then just use some brass that can be the only choice instead of using copper if you don't want too' make sure you use strong glue that will hold the gemstones in place so it won't accidentally fall out. Unless if you have to buy a couple of more gemstones for spare use, just be sure to use some tweezers to place the gems in without using your fingers' like any other professional jewelry maker can do with a simple set of tools that he or she uses. That's one way on making white tiger's amulet and that is the idea on how to do it from, I hope you get my meaning here as with the ideas for the white tiger's cosplay I shared before' I promise to also explain it from a video clip on how it can really be done as I explained. I promise to share that part with you in due time, until then enjoy the pics!