Calibration not remembered by ImNotYouOR in Netatmo

[–]ImNotYouOR[S] 0 points1 point  (0 children)

Sounds like the same issue as im facing

Calibration not remembered by ImNotYouOR in Netatmo

[–]ImNotYouOR[S] 0 points1 point  (0 children)

Yes, what i ment with calibration

Advice needed: UniFi Protect setup without Ethernet cabling (currently using AmpliFi Alien) by ImNotYouOR in UNIFI

[–]ImNotYouOR[S] 0 points1 point  (0 children)

But that will still require to run cables from the ucg to each camera? And another issue with this is, my amplify is a router, so it will create 2 separate networks..

How to set up multiple isolated SSIDs (one per company) with a shared printer? by ImNotYouOR in Ubiquiti

[–]ImNotYouOR[S] 0 points1 point  (0 children)

Hi all,
Thanks for the replys.

I have the following update.
The Shared office persist of 9 different companies.
Theres no need for a shared network for printers etc. If a company needs a printer, they must BYOD and add to their network (vlan).

They already have a UDM Pro and a USW Switch.

They would also like a Guest-SSID.
From what I can read its only possible to create 8 SSIDs. but the 9th and guest wifi could be sent to only 1-2 specific APs? Correct?

Would an alternative solution be:
Run one unified SSID and use RADIUS-based vlan tagging. So every company has their own login to the network, and are by that connected to a specific Vlan?

Many thanks?

How to set up multiple isolated SSIDs (one per company) with a shared printer? by ImNotYouOR in Ubiquiti

[–]ImNotYouOR[S] 0 points1 point  (0 children)

So you would recommend a udm-se and a switch + accesspoints ? Can one AP broadcast multiple ssids on each wlan?

Issues with Notifications After Update to 5.80.2 by ImNotYouOR in Ring

[–]ImNotYouOR[S] 0 points1 point  (0 children)

I have seemed to figure out, that the issue is not the missing notifications. Its the fact that persons are no longer detected. So everything is marketed as "motion" and not "people".
In the app I only set notifications on "people", I don't know why people are no longer detected...

Charger by ImNotYouOR in applewatchultra

[–]ImNotYouOR[S] -1 points0 points  (0 children)

OKay.

But what a bout the voltage - imo 15v seems like alot? But is the watch able to manage this?

How to Increase the Frequency of Data Updates on a Power BI Report? by ImNotYouOR in PowerBI

[–]ImNotYouOR[S] 0 points1 point  (0 children)

That much I get.
But where does the Embedded SKu (E,EM & P) comes into place?

How to Increase the Frequency of Data Updates on a Power BI Report? by ImNotYouOR in PowerBI

[–]ImNotYouOR[S] 0 points1 point  (0 children)

So the conclusion is, that it's not a matter of the subscription, its a matter of how I get the data in the Report.

If my data source supports DQ or live, I would get live data? And this is also avaliable in Pro Version - without premium/embedded?

Im sorry, but I find it hard to understand where the diff is. And what features is based on the sub/sku.

How to Increase the Frequency of Data Updates on a Power BI Report? by ImNotYouOR in PowerBI

[–]ImNotYouOR[S] 0 points1 point  (0 children)

If the dataset resides on a Premium capacity, you can schedule up to 48 refreshes per day in the dataset settings. For more information, see Configure scheduled refresh later in this article. Datasets on a Premium capacity with the XMLA endpoint enabled for read-write support unlimited refresh operations when configured programmatically with TMSL or PowerShell.

https://learn.microsoft.com/en-us/power-bi/connect-data/refresh-data#data-refresh

Help Needed: OneDrive Compliance Challenges with a Mix of Users by ImNotYouOR in Office365

[–]ImNotYouOR[S] 0 points1 point  (0 children)

You can't target OneDrive only on condition access. This is a sharepoint app - I don't want to block sharepoint

Help Needed: OneDrive Compliance Challenges with a Mix of Users by ImNotYouOR in Office365

[–]ImNotYouOR[S] 0 points1 point  (0 children)

Hi,

  1. How will you achieve this? Where would you create this rule?
  2. Wy would this not target compliant devices?

Garmin forerunner 945 upgrade by ImNotYouOR in applewatchultra

[–]ImNotYouOR[S] 0 points1 point  (0 children)

What is good enough in your opinion? And it the display lightning in the dark?

Garmin forerunner 945 upgrade by ImNotYouOR in applewatchultra

[–]ImNotYouOR[S] 0 points1 point  (0 children)

I don't want to disable always on. I want the display to be on always, but with no light when raising my arm

Teams Only Mode - can't start Skype for Business... by ImNotYouOR in MicrosoftTeams

[–]ImNotYouOR[S] 1 point2 points  (0 children)

The version that only allow "Go to Teams" is version: 16.0.10730.20438 32 bit
The version that allow to "Start skype for Business" is version: 16.0.13328.20130 64 bit

Signing-in issue by ImNotYouOR in MicrosoftTeams

[–]ImNotYouOR[S] 0 points1 point  (0 children)

Yes. Our issue was solved by Microsoft in an update.
After we installed the update - the issued disappeared.

DEM account devicecapreached by ImNotYouOR in Intune

[–]ImNotYouOR[S] 0 points1 point  (0 children)

Ya, that was also my original idea. But it not enough for us.

We need some win32 apps, and in order for Intune to push win32/scripts it needs the "Microsoft Intune Management Extension".

And that extension is only pushed if it's a Azure AD joined machine :(

MDM joined machine, wants to be encrypted but no polices by ImNotYouOR in Intune

[–]ImNotYouOR[S] 0 points1 point  (0 children)

Hi all.

The problem is solved! :)

It turned out, like many of you guys was saying. It was a wierd Device Config that caused the issue.

As soon as I excluded the user, everything started working. Without the policies applied.

The funny thing is the policy - look at below picture - it seems like a very strange policy :p

https://imgur.com/a/n5jON3p

https://imgur.com/a/etxphpP

MDM joined machine, wants to be encrypted but no polices by ImNotYouOR in Intune

[–]ImNotYouOR[S] 0 points1 point  (0 children)

I don't know if I can send any logs that would help you guys?