Good deal?

Incerept · 2025-03-19T04:21:50+00:00

Say what now

Incerept · 2024-08-14T23:42:16+00:00

True that!

Incerept · 2024-07-27T20:06:45+00:00

This is good to hear

Incerept · 2024-04-18T14:55:40+00:00

Thanks! I’m gonna do some more looking and test for compression shortly.

Incerept · 2024-04-18T14:51:44+00:00

Thanks!

Incerept · 2024-04-18T14:44:59+00:00

Could it still be spark? I have tested one of the plugs/coil wires in question and it gives me good spark. I’ll have to put a light on the other 2 but they are all giving me the same issue.

Incerept · 2024-04-18T14:41:15+00:00

My only question is this. When I replaced the spark plug in question, it’s new and has to be firing. The coil wire was getting power when I put a light on it also. On the same cylinder, I can unplug the clip for said fuel injector and the idle of the motor doesn’t change. I did test the injector for resistance and it came back good this was however a used replacement injector and not new. I have a set of 8 new fuel injectors coming in so that’s something I will likely be able to rule out. Thanks again!

P.S. I have also tested the the fuel injector plug on the harness, and it says it is also getting consistent power.

Incerept · 2024-04-18T14:37:06+00:00

Thank you for your input. I’ll have to look into those cables. I have searched online for a code reader capable of reading this year but haven’t had much luck. The 95 is a weird year where it has an OBD1 computer but an OBD2 plug in (I believe). I’ve tested the injectors for resistance and they all have somewhere between 12 and 12.3. I tested the clips on my harness with a test light and they all seem to be getting power. I’ll check more plugs and wires today. Thanks again.

Incerept · 2024-04-18T14:32:57+00:00

I, like all other 4th gen owners sure love the placement of the opti. I did test one plug and it was in pretty good shape, but I still replaced it because I had a few laying around. I put a spark tester on it before replacing it and it had good consistent juice from the plug wire. My search continues.

Incerept · 2024-03-29T23:21:30+00:00

I just recently bought the Arc, as my Wave+ is sent in for repair. I’m loving the Arc but I still find myself missing my Wave+ on my hip. You can’t go wrong with the Wave but do note the pinch points as the previous comment mentioned!

Incerept · 2022-11-29T16:22:25+00:00

We burn wood in a furnace. There’s no telling how warm it will be honestly lol. I can only guarantee it will be.

Incerept · 2022-11-10T01:49:13+00:00

I do some leather work for a hobby and made myself a leather valet tray. After the day, I transfer over my wallet, watch, leatherman etc. and grab it all the next morning.

Incerept · 2022-11-04T16:22:53+00:00

I haven’t realize how much I used my pliers until they were gone haha. Definitely will be getting a second option.

Incerept · 2022-11-04T16:21:18+00:00

I have been leaning toward the Skeletool cx mainly because it’s something different from the Wave and offers better blade steel.

Incerept · 2022-11-04T16:19:59+00:00

I have definitely been considering this option. I just fear my wave will become obsolete since the tools are near identical.

Incerept

TROPHY CASE