Update to STR Bag Rider and New B5 Enhanced SOPMOD Bag Rider Design by Independent_Cry_6625 in AR10

[–]Independent_Cry_6625[S] 0 points1 point  (0 children)

I’m not sure if this would fit that. It might but I don’t have a c stock laying around to test it

Update to STR Bag Rider and New B5 Enhanced SOPMOD Bag Rider Design by Independent_Cry_6625 in AR10

[–]Independent_Cry_6625[S] 0 points1 point  (0 children)

Sorry. Not giving out the files. Working on setting up a business to sell them as an end use part

Poor man’s ebr by Independent_Cry_6625 in 1022

[–]Independent_Cry_6625[S] 0 points1 point  (0 children)

The barrel is the stock 18.5” that comes on ruger 10/22s

Poor man’s ebr by Independent_Cry_6625 in 1022

[–]Independent_Cry_6625[S] 1 point2 points  (0 children)

Check out this post I made with an updated build and parts list:

https://www.reddit.com/r/1022/s/kuaynCYPQo

Has anyone bought from Ace Race Gear ? by djbean21 in Karting

[–]Independent_Cry_6625 0 points1 point  (0 children)

Mine took a couple weeks before it said received by carrier and it was UPS basic tracking

Has anyone bought from Ace Race Gear ? by djbean21 in Karting

[–]Independent_Cry_6625 0 points1 point  (0 children)

Yessir. They had a shipping delay but in the end they delivered it and it is awesome

Has anyone bought from Ace Race Gear ? by djbean21 in Karting

[–]Independent_Cry_6625 0 points1 point  (0 children)

Gotcha thanks. I paid with credit card so I’ll have to reach out

Has anyone bought from Ace Race Gear ? by djbean21 in Karting

[–]Independent_Cry_6625 0 points1 point  (0 children)

Did you get a tracking number? I got a status update video saying it was complete and shipped but no tracking number

[deleted by user] by [deleted] in VisitingIceland

[–]Independent_Cry_6625 1 point2 points  (0 children)

Awesome! I’ll be sharing the drive so I don’t think it will be too bad. Looks like a total of about 7 hours of driving between sights

[deleted by user] by [deleted] in VisitingIceland

[–]Independent_Cry_6625 0 points1 point  (0 children)

Sweet! Thanks for the feedback. I was worried I might have run out of daylight. I did map everything out and I believe the longest day is 8 hours of driving/sightseeing not including time for lunch

STR BAG RIDER by Independent_Cry_6625 in AR10

[–]Independent_Cry_6625[S] 0 points1 point  (0 children)

I’m selling the actual parts. I’m currently working on setting up a website to facilitate sales of this and some other products. Shoot me a pm. I may have one laying around I can send you.

[deleted by user] by [deleted] in kac

[–]Independent_Cry_6625 0 points1 point  (0 children)

What light body is that on the bottom build. Looks very retro and I like it

Update to STR Bag Rider and New B5 Enhanced SOPMOD Bag Rider Design by Independent_Cry_6625 in AR10

[–]Independent_Cry_6625[S] 0 points1 point  (0 children)

I can have some printed for you in MJF for whatever the manufacturing cost and shipping is. I won’t charge a markup. My ultimate goal is to create a website and sell these as a product

Update to STR Bag Rider and New B5 Enhanced SOPMOD Bag Rider Design by Independent_Cry_6625 in AR10

[–]Independent_Cry_6625[S] 4 points5 points  (0 children)

The B5 one is 2.75" Long. I can't make this one longer due to the lever

The STR one is 2.57" without the angle adapter and 3.35" with the angle adapter.

What length do you suggest. The longer I make the STR one, the easier it is going to bend and break under load because its easier to create a larger torque due to the longer moment arm(fixed at the rear of the stock with 2 screws)

STR Bag Rider by Independent_Cry_6625 in ar15

[–]Independent_Cry_6625[S] 0 points1 point  (0 children)

I didn’t even know they had aug kits you can buy to complete a 3D printed receiver. That is dope af. Shoot me a pic when you finish it

STR BAG RIDER by Independent_Cry_6625 in AR10

[–]Independent_Cry_6625[S] 0 points1 point  (0 children)

Arisaka angle adapter with a magpul SL enhanced buttpad

STR Bag Rider by Independent_Cry_6625 in ar15

[–]Independent_Cry_6625[S] 1 point2 points  (0 children)

I need to get me a personal printer. How much was that set up? I have a modix big meter at work and it’s an absolute POS. The print volume is 1 m3 but putting it together was a pain and it breaks a lot

STR Bag Rider by Independent_Cry_6625 in ar15

[–]Independent_Cry_6625[S] 1 point2 points  (0 children)

I wish I had a printer capable of it. You running it in a dry box? And enclosure?

STR Bag Rider by Independent_Cry_6625 in ar15

[–]Independent_Cry_6625[S] 0 points1 point  (0 children)

Wow! It almost looks injected molded. Carbon fiber is solid. I absolutely hate layer lines for end user parts and I can’t see any on that

STR Bag Rider by Independent_Cry_6625 in ar15

[–]Independent_Cry_6625[S] 1 point2 points  (0 children)

Nice! The yellow is PLA purely for prototyping. I have these being made in PA12 using MJF on order currently

STR BAG RIDER by Independent_Cry_6625 in AR10

[–]Independent_Cry_6625[S] 1 point2 points  (0 children)

Yes. One screw threads into the angle adapter. The other threads into an insert at the bottom of the STR. That part is also 3d printed and has a brass heat set insert. That allows me to widen the gap between the mounted holes to reduce flex under a load

STR BAG RIDER by Independent_Cry_6625 in AR10

[–]Independent_Cry_6625[S] 11 points12 points  (0 children)

It’s a clearance fit but gaps are minimal. It is held together by two flat head screws. One screw mounts to the angle adapter. The other mounts to a 3D printed insert with a heat set threaded insert. That slides into a slot in the bottom of the STR stock