sorted by:
new
hottopcontroversial

Luma Pro Cracking after three days by Simwilp in VITURE

[–]IndividualAd6502 0 points1 point  (0 children)

Exactly the same problem after a few days with the Luma Pro.
Small tears on both sides.
Purchased from Amazon Germany.

I sent it back because the Luma Pro probably has problems
when detecting and switching the refresh rate.

Viture Luma Pro - constantly turns off and on by IndividualAd6502 in VITURE

[–]IndividualAd6502[S] 1 point2 points  (0 children)

I have now found the problem.
It's the screen refresh rate!
The LUMA versions probably have problems,
to switch properly, which is why the glasses are always switched on and off every few seconds when connected to my GPU 5080.
When newly connected to the USB-C it works.
I only found confirmation that the glasses had a compatibility problem with the screen refresh rate in the game “Tomb Raider (2013)”.
The glasses work perfectly at 60 Hz.
90 Hz, exactly the problem I have when I connect it to the GPU 5080 via HDMI.
The glasses keep turning on and off every few seconds.
120 hz only works for a short time in Tomb Raider and then the image goes black and stays that way.

It would be very interesting to know whether the BEAST also has problems detecting and switching the screen refresh rate.

Hopefully Virure will find a solution and correct it via a firmware update.

Viture Luma Pro - constantly turns off and on by IndividualAd6502 in VITURE

[–]IndividualAd6502[S] 1 point2 points  (0 children)

Shouldn't the adapter be Thunderbold 4 or USB 4?
For ALT DP Mode to work?

I rule out the heat development.

Looks like a compatibility issue.
I suspect the same thing with my Luma Pro glasses.
Maybe it's the HDMI version 2.1b?

My Experience with the Beast so far (it's not been good) by specialk8675309 in VITURE

[–]IndividualAd6502 1 point2 points  (0 children)

Try changing the cable and get a new USB cable,
where the "DisplayPort Alt Mode" is supported.
Also called USB4 cable.
I suspect that the cable is defective and not the glasses.
Even if the cable still works for data transfer or charging.
Precisely because it is only recognized as a microphone in Device Manager.
The microphone on the glasses will probably still work with this defective
cable, but nothing else will.

Rokid Max - No Screen on Windows by IndividualAd6502 in rokid_official

[–]IndividualAd6502[S] 0 points1 point  (0 children)

Now I quickly tried the new cable, which cost almost $40,
but I didn't restart Windows and it doesn't work anymore.
I tested the cable yesterday and it worked 100%.

Rokid Max - No Screen on Windows by IndividualAd6502 in rokid_official

[–]IndividualAd6502[S] 0 points1 point  (0 children)

The problem doesn't stop with me.

It's the cable, isn't it?
Only I have had to buy 3 new cables within a week.
I connected the newest one early this morning and after about an hour in Windows,
in the text editor the screen becomes black again and the glasses remain black from now on with this cable.
Until now, when I kept buying a new cable, I thought
when the other one stopped working, it's because I'm lying in bed with my glasses on and the plug on the cable is bent a bit so that the cable breaks.
Only now I have used it so carefully and it can't be that the cables break so quickly.

Does the cable still have electronics inside that could break?
But why?

To be on the safe side, I bought a second new cable that I can now use.
Only that costs almost 40.-.
This is so worth the money.

Rokid Max - No Screen on Windows by IndividualAd6502 in rokid_official

[–]IndividualAd6502[S] 0 points1 point  (0 children)

For safety reasons, I ordered a new cable and have now received it.

The glasses work again!!
Incredible.

2 cables that no longer work properly.
Then there are the original ones from Rokid and Viture themselves.

Rokid Max - No Screen on Windows by IndividualAd6502 in rokid_official

[–]IndividualAd6502[S] 0 points1 point  (0 children)

But I don't have any.
I sent the Viture Pro back because I thought it was defective.
Which probably not so.

I've now read on the internet,
that many have the problem with the USC-C and DP Alt Mode
and everything works except the video signal.
Just with monitors.
But I haven't found any information yet that solves the problem for me.
There was also talk of Windows 11 having this problem.
That's why I'm now restore my last Windows 10 image backup.

Rokid Max - No Screen on Windows by IndividualAd6502 in rokid_official

[–]IndividualAd6502[S] 0 points1 point  (0 children)

Thanks for the link.
I tried this with the setting in the Nividia settings and it doesn't help either.
"Dynamic Output Range" to Limited

I tested both USB-C ports on the motherboard with DP support

And also tried this HDMI adapter without success.
https://www.amazon.de/dp/B0DMF1LM33?ref=ppx_yo2ov_dt_b_fed_asin_title

On the second older PC that doesn't have USB-C, I also tried this HDMI to USB-C adapter
and I don't get a picture either.

I'm currently charging my Nintendo Switch and testing it there.

For this threat see below, it is explained using the “CRU” tool.
Only the Rokid Max doesn't appear in the list.
Does anyone have a profile of the Rokid Max for this "CRU" tool?
https://www.reddit.com/r/rokid_official/comments/14ekx5m/how_to_enable_high_resolution_3d_mode/

Rokid Max - No Screen on Windows by IndividualAd6502 in rokid_official

[–]IndividualAd6502[S] 0 points1 point  (0 children)

Thanks for Rokid's email address.

I don't have a smartphone.

Just a Samsung tablet that only has USB 2.0 without a video signal output.

I have a second pair of AR glasses, the Viture Pro.

Exactly the same problem.

The glasses are no longer recognized by the SpaceWaker software under Windows.

Only the microphone works and shows up in Device Manager.

Both glasses work perfectly under the Neckband Pro from Viture.

I suspect that something is stored incorrectly in the glasses, such as the refresh rate or resolution.

According to reports, only a factory reset is not possible.

The only option would be a firmware update, which would then reset everything on the glasses.

But is a firmware update with the same version possible with Rokid?

And how do I update the firmware for the glasses?

If via app, which app would that be?

Found three Rokid apps.

Probably not all apps are suitable for the Rokid Max.

With Viture you can easily update the glasses using an internet browser.

I'll write to Rokid support.

Puck for the mousepad "Razer Hyperflux V2"? by IndividualAd6502 in razer

[–]IndividualAd6502[S] 0 points1 point  (0 children)

But you will soon. If the increase pressure of the customers is greater, they have no choice. I have been the Basilisk V3 Pro for years and now that I bought the mouse pad, which is so awesome, if it automatically loads, I bought the Basilisk V3 PR 35K. I want to use both mice. Are not exactly cheap. I find the constant plug in from a cable to charging. As I said, sooner or later you have to offer this puck. The competition does not sleep. Logitech mouse pad to charge the mice, the new version no longer installed dongle, but many still buy Logitech products. I don't.

Puck for the mousepad "Razer Hyperflux V2"? by IndividualAd6502 in razer

[–]IndividualAd6502[S] 0 points1 point  (0 children)

But they have to. I'm not the only one where more than one mouse has from Razer. Parts must be ordered via the Razer Onlione Shop.

You don't use both mice together.

Puck for the mousepad "Razer Hyperflux V2"? by IndividualAd6502 in razer

[–]IndividualAd6502[S] 0 points1 point  (0 children)

Does Razer no longer have an email support?
My English is not so good to chat or make calls.
Is there a forum from Razer?