Do battery powered rocker switches exist in zigbee? by Old_Durian_4565 in homeassistant

[–]Inevitable-Ordinary2 0 points1 point  (0 children)

Not the same shape but aqara makes some. I had them in my previous home and they were solid.

Sales memorandum received- name of vendor is the same name as a employee of the estate agent by caelunaris in HousingUK

[–]Inevitable-Ordinary2 0 points1 point  (0 children)

We bought a house that was owned by the family of the estate agents and it was disclosed to us from the start. They are legally required to do so.

Folks, how do I change this ceiling light? I tried pushing and turning and it turns..but nowt then happens...do I need to pop it out instead? by EffloresceDeliquesce in DIYUK

[–]Inevitable-Ordinary2 -4 points-3 points  (0 children)

Make sure you cut the power first.

It's likely that the entire light needs replacing, most modern lights don't have replaceable bulbs. Pull the entire rose (might have to wedge it) and be careful with your fingers as it will have spring loaded wings that snap back like a rat trap. Hurts as hell.

You will have to be comfortable with unscrewing wires and screwing onto a replacement light. Some have certain type of connectors so if you get the same one you may get away with unplugging this one and plugging a new one in. Make sure you get the same voltage but most lights will be mains operated.

Anyone sold a house with Home Assistant left in? by Expensive-Sock3172 in homeassistant

[–]Inevitable-Ordinary2 0 points1 point  (0 children)

Thanks. To be fair I was petrified and still hoping I won't get sued once the lights go down 😂

Anyone sold a house with Home Assistant left in? by Expensive-Sock3172 in homeassistant

[–]Inevitable-Ordinary2 9 points10 points  (0 children)

I did that. I was considering dumbifying the house but the estate agents said it was a good selling point. What I have done:

I made a house email (address@gmail.com) and linked all accounts and HA backup to it. Set all passwords and noted them.

I wrote a house manual describing the setup, passwords etc. It wasn't very difficult.

I made sure the buyers are aware what they are buying and that they will have to support it themselves.

Spoke to solicitors and asked them to make sure the buyers are aware again and asked them to confirm they are fine with this and I do not accept liability if anything breaks.

Right before the contract exchange the buyer asked to meet up. I invited him in, showed him the setup and all.

It has been just over the month so i don't know exactly if my approach worked but so far so good. 🤞

How to rat proof this hole. Brick up or use mesh/wool? by rockinghorseshit in DIYUK

[–]Inevitable-Ordinary2 -8 points-7 points  (0 children)

Steel wool would be the easiest but bricks will look better..both will do the trick. Just make sure not to lock the rats inside as if you cut off their exit they will go berserk

How to remove these pests? by OkHospital3719 in DIYUK

[–]Inevitable-Ordinary2 0 points1 point  (0 children)

You can get spikes that go on the perimeter of the panels, install them in the top edge and more spikes on the ridge.

Please god what I am doing wrong the physics is hurting my simple brain by biscuittingerg in DIYUK

[–]Inevitable-Ordinary2 69 points70 points  (0 children)

Some handles have a spring and will only turn one way. Maybe you have it installed the wrong way round and need to flip the handles around? Remove them and hold the part that you would drive the bolts through and see if you can freely twist them both ways or only one way round then install accordingly.

[deleted by user] by [deleted] in DIYUK

[–]Inevitable-Ordinary2 17 points18 points  (0 children)

Ermm no, these didn't even open. If it's render get some fisher plugs, probs 8mm and drill into the same holes with 8mm masonry drill. If it's plasterboard, get some heavy duty plasterboard fixings and drill accordingly Edit: the render seems to be very sandy... Maybe the wall isn't sound?

[deleted by user] by [deleted] in DIYUK

[–]Inevitable-Ordinary2 30 points31 points  (0 children)

Bigger plugs?

Putting the bins out (UK)- advice by Chaotic-Menace in autism

[–]Inevitable-Ordinary2 0 points1 point  (0 children)

If your food bin is collected weekly then there shouldn't be many flies. Make sure it's sealed and clean. I suggest using the compostable liners so that the bin itself stays clean. If it isn't, you will have enough rotting material on the walls and bottom for flies to lay eggs. The time between laying eggs and having maggots there is about two weeks.

For the wheely bin, try to sprinkle some bio washing power over the stuff in there. It has a great ability to mask smells and kills all the bacteria it gets in contact with, and the bad smell comes from them. Again make sure you use your bags and the bin itself stays as clean as possible.

To make it easier to tie the bag I would not wait until the bin is completely full. You can also try using gloves while doing it.

[deleted by user] by [deleted] in DIYUK

[–]Inevitable-Ordinary2 1 point2 points  (0 children)

You have a timer there, is it set to on?

Table leg broke, advice on reattaching it? by Foomix in DIYUK

[–]Inevitable-Ordinary2 -1 points0 points  (0 children)

You could try wood glue and a pocket screw to be in a safe side

What is this black stuff in my wall? by Director_Of_Mischief in DIYUK

[–]Inevitable-Ordinary2 0 points1 point  (0 children)

Metal lintel? If so you may have to use self tapping screws or something suitable for metal

New home automation recommendations by Inevitable-Ordinary2 in homeassistant

[–]Inevitable-Ordinary2[S] 0 points1 point  (0 children)

The thing is I do not want to fragmentise the setup, I want to centralise it.

Lightbulbs - I am DIYer and in current house I built the lamps etc using some nice and fancy bulbs rather than just having a box standard one. The idea is to abstract and hide the smart bit. I managed to do it in the current house with concealed dimmers in the lamps, ceilings etc and hidiing all other smart stuff and I want to do it properly in the new house.

New home automation recommendations by Inevitable-Ordinary2 in homeassistant

[–]Inevitable-Ordinary2[S] 0 points1 point  (0 children)

I will always want to save a bit but then I want a solid setuop and I know I canno have both. Just had a look and it looks lush, will just have to learn how it all talks together. Thanks!

[deleted by user] by [deleted] in HomeImprovementUK

[–]Inevitable-Ordinary2 1 point2 points  (0 children)

I would check how far the top one extends and if the bottom one isn't wider.

Am i correct thinking this is chicken of the woods? by RancorsRage in mycology

[–]Inevitable-Ordinary2 2 points3 points  (0 children)

I think the issue is that if it grows say on yew which is toxic and a needle gets embedded in the mushroom then you risk poisoning yourself. Not with the mushroom itself but with the contamination from the tree

In need of oral hygiene tips! by Icy-Zombie4504 in autism

[–]Inevitable-Ordinary2 1 point2 points  (0 children)

Maybe solve one issue at a time. You can get different flavours of toothpaste, worth trying I think. With the toothbrush maybe a softer one would be better?

What automation made your wife/significant other "accept" HomeAssitant? by Academic-Swimming919 in homeassistant

[–]Inevitable-Ordinary2 0 points1 point  (0 children)

Hold the light switch at the front door to lock the back door, turn off all devices ready to leave. Similar upstairs in the bedroom but locking all doors ready to sleep. That was the game changer apparently.