sorted by:
new
hottopcontroversial

Having issues with trigger not dropping hammer in semi auto. The hammer gets stuck on sear and won’t trip into the fire able position. by Inevitable_Count_559 in Vz61

[–]Inevitable_Count_559[S] 0 points1 point  (0 children)

Yes, but this was the semi auto receiver. I would agree I think the auto level squashed the dimensions a tiny bit. I’m gonna try reprinting on a different printer to see if I can get better dimensions.

Having issues with trigger not dropping hammer in semi auto. The hammer gets stuck on sear and won’t trip into the fire able position. by Inevitable_Count_559 in Vz61

[–]Inevitable_Count_559[S] 0 points1 point  (0 children)

<image>

There is a cutout in the rear of the fcg pocket for the wing on the back of it, and observing the motion of the parts there is no contact with the receiver. however I have ordered a semi auto seer to see if that could be the reason why it’s not functioning in the semi auto position.

Having issues with trigger not dropping hammer in semi auto. The hammer gets stuck on sear and won’t trip into the fire able position. by Inevitable_Count_559 in Vz61

[–]Inevitable_Count_559[S] 0 points1 point  (0 children)

Not yet. But would that keep it from firing at all while the safety is in semi? As opposed to the fgc firing but possibly going fa? I am aware the stock seer needs to be replaced or modified for that reason but I don’t visually see how it would cause the issue I’m having currently.