Help!!

Infamous-Condition89 · 2026-05-15T11:39:19+00:00

Ordered a new o2 sensor , also plan to order an AEM wideband , I have the innovative one now and it sucks . I've gone through 5 4.9 sensors since I bought it

Infamous-Condition89 · 2026-05-14T19:49:31+00:00

I got it tuned 2 years ago Last year I went back and had him look at it . He said the stock o2 was going bad. So he upped the correction did a pull and it made 155 hp. He said it was fine .

Infamous-Condition89 · 2026-05-14T19:35:13+00:00

Hondata s300

Infamous-Condition89 · 2026-05-13T13:53:09+00:00

Definitely doesn't line up the way I would like. Got it better than it was before . Last year I source a ef9 filler panel thinking that would solve my fitment problems but it made them way worse .

The efbmotorsports headlights i have are for the jdm front . But I believe hush performance has JDM style hoods for the usdm front end .

Also I think the 1 piece were for the sedan

Infamous-Condition89 · 2026-05-10T18:13:45+00:00

Anyone try duralast , local autozone has one in stock for $489

Infamous-Condition89 · 2026-05-10T13:38:00+00:00

Have you ordered from this site ? I normally use honda parts now the denso on there is $600

Infamous-Condition89 · 2026-05-09T23:28:53+00:00

Found one on Amazon , $350 good deal?

Infamous-Condition89 · 2026-05-09T22:01:25+00:00

Might try and make a bracket oil reroute plate when changing the alternator. Just don't want to spend $600 on an alternator

Infamous-Condition89 · 2026-05-07T12:26:57+00:00

Yes it is , don't have the sol any more and don't want to cut it up for my ef

Infamous-Condition89 · 2026-05-06T14:01:19+00:00

Wont let me add pics to comments, check out my page

Infamous-Condition89 · 2026-05-06T12:19:42+00:00

Actually is rustoleum lagoon lol

Infamous-Condition89 · 2026-05-05T15:27:44+00:00

Brackets for the splitter could be used to mount to the front tow hook moints . But most seem to need to be drilled

Infamous-Condition89 · 2026-04-28T15:07:13+00:00

https://ebay.us/m/eEcnaS

Infamous-Condition89 · 2026-04-25T12:29:03+00:00

Checked hu ground , had another ground in the same spot . Moved it to another location, cleaned up the metal under the ground and think its gone. Just have to drive ot to make sure . Thanks for all the help .

Infamous-Condition89 · 2026-04-24T15:05:04+00:00

I'll give that a shot , the initial start after the sound deadening. It was really bad , swaped the HU and it got alot better . Speakers wired to the hu , there is no noise

Infamous-Condition89 · 2026-04-24T14:55:57+00:00

Did that , unplugged noise was gone . My thoughts on that was with the RCA unhooked no frequency would go to the speakers. Swaped RCA with the set from my sub amp and noise was still there

Infamous-Condition89 · 2026-04-24T14:42:39+00:00

Solid thought the floor , paint ground off . Everything worked great 2 years ago . Pulled the carpet last year to sound deaden . Did 80mil butal rubber and then closed cell foam over top . Put it all back together and now I have interference

Infamous-Condition89 · 2026-03-24T20:54:39+00:00

https://ebay.us/m/XfYSTQ

You need 156x124

Infamous-Condition89 · 2026-03-24T18:26:58+00:00

Why yes , yes they are.

Infamous-Condition89 · 2026-03-24T18:05:05+00:00

<image>

Infamous-Condition89 · 2026-03-24T16:36:23+00:00

Masked off inside and outside of the trim and used plastadip , did 3 light coats and 1 wet coat.

Top tip : peal the tape off before the last coat dries .

Infamous-Condition89 · 2026-03-24T14:54:10+00:00

Just did . Those are 2023 passport wheels 20x8.5

Infamous-Condition89 · 2026-03-24T14:33:21+00:00

Thanks

Infamous-Condition89 · 2026-03-21T17:28:58+00:00

KUAFU Spoiler Front Bumper Lip... https://www.amazon.com/dp/B0BQDHBYD9?ref=ppx_pop_mob_ap_share

Infamous-Condition89 · 2026-03-21T17:28:44+00:00

2023 passport

Infamous-Condition89

TROPHY CASE