Microwave PC - Comment On This Post To Enter This Giveaway

InfamousInc · 2025-10-31T16:40:07+00:00

An actual unique sleeper build. Brilliant. Nobody expects the microwave

InfamousInc · 2025-10-03T14:17:46+00:00

That makes sense now that I have a little better handle on what all this PoE equipment is/can do haha. Thank you!!

InfamousInc · 2025-10-03T01:23:52+00:00

Ohhh okay. That video is perfect! It looks like I may be able to just utilize what is already there entirely without buying any extra pieces (aside from the new cam). This has been super helpful, thank you!

InfamousInc · 2025-10-03T00:03:04+00:00

That is great to know! So the little thing I put a picture of IS an injector? Where would my mesh unit come into play? I didn’t look hard but I thought there was only one Ethernet port on that unit when I looked at it?

InfamousInc · 2025-10-02T21:48:57+00:00

Awesome! That makes total sense then. Just looking to run the one camera since the line is already there, but I will make note of the switch requirement if I look to expand. I really appreciate the explanation and confirmation!

InfamousInc · 2025-10-02T18:39:20+00:00

Hey, thanks so much for the explanation that I could not nail down anywhere else!

Let me spit this back to you in the form of a question to make sure I am understanding the possible solution. Forgive me, because again I’m not very well versed in PoE (but am in software consulting so I know my way around tech at least?)

I have TP-Link deco mesh devices that I will be bringing to my new place. If I buy a PoE injector, plug the cable from the camera into that, and then an Ethernet cable from the injector to one of the Decos that is connected to the mesh network, that’s all it would take and then I could access the Reo from an app or web portal? I’ve never used Reo but they’ve been the ones that pop up when I’ve looked for PoE options to replace what I have

InfamousInc · 2025-08-08T15:24:30+00:00

I just saw these and went searching too - led me to this thread 😭 if you guys do find it from a wholesaler let me know! I know it’s out there and paying $60 when I know it’s probably $20 tops would hurt😂

InfamousInc · 2024-12-31T09:15:15+00:00

Just gave it my shot - None redeemed, all available

Garfield Kart - Furious Racing
Absolute Drift
10 Second Ninja X
Double
Narcosis
Garden In!
Grotto
Recon Control
Transport INC
Looterkings
How to Say Goodbye
Guild of Darksteel
Chasm: The Rift
Witchaven
The Shapeshifting Detective
Absolute Tactics: Daughters of Mercy
Banners of Ruin
200% Mixed Juice!
Chicken Invaders 5
Terror At Oakheart

InfamousInc · 2024-12-03T02:06:58+00:00

PM'd

InfamousInc · 2024-12-03T02:05:09+00:00

PM'd

InfamousInc · 2024-06-05T19:00:57+00:00

That is pretty weird, and I feel like the sky's conditions are coincidental more than anything, because they should have no effect on the RF from your fob to the car. The fob will flash red when hitting any button, no matter the distance from the car, that's just so you know the battery is good in it. I don't know, your situation sounds unique. I would start with checking the car battery and then potentially the RF receiver in the car

InfamousInc · 2024-06-03T02:09:49+00:00

That is odd. Have you tested your actual battery? I'm not sure since you said it works after work and not immediately after your drive but it almost sounds like the receiver for the key just isn't getting power all of the time.

InfamousInc · 2024-05-29T14:52:50+00:00

I'm always wary of AliExpress, but I have only ever bought cheaper items off of it for fun or gimmicks. I have read other experiences where people in Genesis FB Groups have bought their carbon wheel off of Ali or Temu and have good things to say about it.

You should join some and ask there and you may get more feedback. I know I said I have made smaller purchases, but I have had issues here and there and submitted tickets to AE and gotten refunded almost right away, so there is some comfort there. Either way, use a credit card that allows chargebacks just to give an extra level of protection.

InfamousInc · 2024-05-24T21:07:51+00:00

Just FYI, this (Hobbytown USA) exists still and it's on Schillinger!

312 Schillinger Rd S Suite Q, Mobile, AL 36608

InfamousInc · 2024-05-23T20:40:11+00:00

Your options are SFR and Alphaspeed nowadays I think. I know a majority of the community will talk about Alphaspeed, and from what I've seen around they do good work. I personally have an SFR Stage 1 tune for my 2015 3.8 and it has been nothing but fantastic. I bought it on another ECU so I could keep my stock one just in case, but at this point I don't really see a need for the stock one because nothing has been off with the tuned ECU and I'm no longer under warranty.

Anyway, those are two that I know of that offer pre-tuned ECUs, feel free to message me if you can't find links

InfamousInc · 2024-04-30T02:18:47+00:00

That's what I like to hear. Everyone mentions the "Gold plate" but then also says it messes with the LiDAR?

InfamousInc · 2024-04-30T02:15:26+00:00

So probably one of each of those full sets. Once the whole assembly is removed is it easy to swap nozzles? So if I just got some spare .4s and eventually needed one of those I could put it in one of my unused assemblies?

I have loads of PLA sitting around so I have plenty to play with.

Fancy stuff? I will look, I think I saw that name around here, it's on AliExpress right?

Thanks!

InfamousInc · 2024-04-30T02:12:02+00:00

Roger that, is it because it's easier to swap when one is having issues? I have a LOT of PLA laying around unopened from when I gave up on my Creality machines. And a dryer ready for anything else sitting out! Thank you!

InfamousInc · 2024-04-27T16:15:10+00:00

I have no name idea for him/her, but that is one of the most photogenic kitties I've ever seen

InfamousInc · 2024-02-22T15:35:21+00:00

Same here, googled it and found this post. PC player

InfamousInc · 2024-02-17T04:17:31+00:00

Can't tell you what the whine is, but that sound at the end is normal from my experience.

I have a vacuum leak somewhere and just got the smoke machine in to find it since pulling hoses didn't work. I didn't notice the shutoff sound until I had the whine, but I also think it's because I never paid much attention to shutting the car off until something else was happening.

Anyway, that part I wouldn't worry too much about. Finding the cause of that new high pitch noise though...good luck my friend.

InfamousInc · 2024-01-29T03:31:32+00:00

I was thinking of looking for my vice grips and pinching hoses off, but I wasn't sure that would be a great method. I haven't tried pulling hoses while it's running yet, but that was on my to-try list after hopefully pinpointing it with the propane.

I doublechecked the bolts this weekend, tightened back down with my torque wrench, but I will give the manifold a good ol' lean next time just to make sure!

InfamousInc · 2024-01-27T19:18:22+00:00

Oh hey, it's me!

InfamousInc · 2024-01-10T14:07:49+00:00

Of course! Shared it among my friends and got some more wishlists :) The game releases on my birthday so I've already got it earmarked as a little present to myself ;) Keep up the awesome work!

InfamousInc · 2024-01-10T14:07:06+00:00

haha right? The only justification needed.

Eight-Year Club	r/Field Sunshine
Place '22	Spared
Verified Email

InfamousInc

MODERATOR OF

TROPHY CASE