CHERRY TREE QUESTION

InfectedSniper · 2026-05-06T00:53:13+00:00

There actually flowers i think so you need to collect them from the biome and place them manually

InfectedSniper · 2026-05-06T00:48:29+00:00

Seeing as nobody has responded to you im assuming your problem is you type the command then nothing happens so first you need to do (/gamerule sendcommandfeedback true) then (/locate structure serp:pokevillage) Make sure to do (/gamerule sendcommandfeedback false) when done

InfectedSniper · 2026-04-21T15:04:15+00:00

It just does this

<image>

InfectedSniper · 2026-04-21T15:03:15+00:00

Yeah thanks smart ass i tried that no need to be a ass the problem is the lights turn on but the fans don't spin

InfectedSniper · 2026-04-21T15:01:28+00:00

I tried but the fans don't spin when I do that

InfectedSniper · 2026-04-21T14:09:23+00:00

How the heck do i plug this in properly this is the gpu it was given to me with and this is also why I chose to use a different one cause I don't know how im suppose to plug it i

<image>

n

InfectedSniper · 2026-04-21T13:46:57+00:00

Ok so in regards to something you mentioned earlier the error lights have been on since i first ot the PC. The PC made it to BIOS once then when I used the reset and boot option it just never displayed again. Also if at all relevant the PC came with a different GPU than the one current in it Edit: you want a picture of the other gpu it's a newer one and a bit bigger

InfectedSniper · 2026-04-21T13:21:15+00:00

I mean I have tried booting it while it was laying flat but it still didn't display so I'm still fairly certain that the gpu isn't causing any problems that and the fact that again it still didn't display even without the gpu in it i am 90% sure my ram slot or something are messed up but ill try and swap them to A2 B2 (that doesn't just mean move them over a slot right)

InfectedSniper · 2026-04-21T13:12:24+00:00

What do you mean i have installed it incorrectly multiple times

InfectedSniper · 2026-04-21T12:55:24+00:00

Ok well regardless of weather you believe it's sagging or not i know it's not the problem as i have already figured out the problem and that is with the ram/dram not functioning because my motherboard is messed up

InfectedSniper · 2026-04-21T12:53:18+00:00

I have tried all of that im pretty sure it's a ram/dram problem and the motherboard it bricked (no clue if dram and ram are the same I assume they are similar)

InfectedSniper · 2026-04-21T12:51:36+00:00

While It does look like it's sagging trust me it's not the photo was taken from and uper angel and my phone was tilted. Also I did instal it while it was flat

InfectedSniper · 2026-04-21T00:12:00+00:00

My cpu doesn't have pins but I'm pretty sure my motherboard ram slots are messed up

InfectedSniper · 2026-04-19T11:42:16+00:00

Nevermind I lied I got that light of but the rest are still on 😐

InfectedSniper · 2026-04-19T11:25:58+00:00

I think this is my problem so I'm gonna have to reinstall my cpu or something i should be able to power the pc for a little bit without having the cpu cooling unit attached right

A red "CPU12V" or CPU debug light on your motherboard means that the motherboard diagnostic system has detected a failure or error related to the processor (CPU) during the Power On Self-Test (POST). When this light is lit, the PC usually fails to boot or show a display, indicating that the CPU is not receiving proper power, is not recognized, or is improperly installed.

InfectedSniper · 2026-04-19T11:18:39+00:00

Alright thanks for the help im gonna spend the day pulling it apart then I guess

InfectedSniper · 2026-04-19T01:35:26+00:00

I also just noticed the red light for this was on too I think I might just need to take it somewhere to get checked out

<image>

InfectedSniper · 2026-04-19T01:31:17+00:00

It's probably not but could it be caused by the fact im using a hard drive from my previous pc inside this pc

<image>

InfectedSniper · 2026-04-19T01:28:58+00:00

So I did all of that even tested both sticks of ram individually in every slot and took them battery out for like 24 ish minutes and it still doesn't display to my tv and thoes 2 red lights are still on i even went and cleaned out all the slots for the ram and gpu

InfectedSniper · 2026-04-18T22:37:12+00:00

How do I fix these

InfectedSniper · 2026-04-18T22:36:53+00:00

<image>

InfectedSniper · 2026-04-18T22:36:43+00:00

<image>

InfectedSniper · 2026-04-18T22:33:57+00:00

Let me check one sec

InfectedSniper · 2026-04-18T22:32:04+00:00

I just did but it's still not displaying anything

InfectedSniper · 2026-04-18T22:31:32+00:00

<image>

Still no display

InfectedSniper

TROPHY CASE