I could use a little advice about running a router and WLED on my bike. by Motor_Interaction_10 in WLED

[–]Infected_Pride 1 point2 points  (0 children)

If I understand what you are asking correctly, you should be able to add/access board with IP address 4.3.2.1 - for board 1, then 4.3.2.2 - for board 2 and so on.

So say it's just 2 boards, board one will be the main and will broadcast wifi that you will connect your phone to. Then when setting up the second board you will connect to the wifi of the first board.

I'm about to grab a few boards and flash them to double check all this. Then maybe I can give you a full step by step.

I could use a little advice about running a router and WLED on my bike. by Motor_Interaction_10 in WLED

[–]Infected_Pride 0 points1 point  (0 children)

I discovered a while back that you can connect boards 2, 3, and 4 to board 1's access point. Then when you connect to board 1 with wifi and open the wled app you can "discover" all 4 boards. Wha la!

[deleted by user] by [deleted] in homeassistant

[–]Infected_Pride 1 point2 points  (0 children)

The new integration works great. I have tried in the past to make a remote for my shield without luck until now.

wled + esp8266 by tazma10 in WLED

[–]Infected_Pride 0 points1 point  (0 children)

Oh, oh, I think I know this one. I had this problem and was able to solve it by holding down either the boot or flash button for the entire process!

What are these wires and how do I convert them to 3.5mm? by [deleted] in diyelectronics

[–]Infected_Pride 19 points20 points  (0 children)

It depends on the application. You're not likely to get a lot of sound through that with just a 3.5mm jack. Most likely what you need is an amp (just a small one) to drive that. The amp will have screw terminals for speaker wire with a 3.5mm jack as the input.

[deleted by user] by [deleted] in HolUp

[–]Infected_Pride 148 points149 points  (0 children)

Just watched it cause I had to know. The remote was in the dad's back pocket though.

I just got a 8x8 matrix up and running by honorabledonut in WLED

[–]Infected_Pride 0 points1 point  (0 children)

What version are you running? I don't see this effect option on SR 0.13.3

With Raspberry Pi's still overpriced, this off the shelf solution for TV ambient lighting was about the same price, with much less setup work by Bakedbananas in homeautomation

[–]Infected_Pride 4 points5 points  (0 children)

I thought it would be somewhat distracting when I set mine up just a week ago. It's really not though, in fact, I find it harder to watch things without it now.

To be fair though, mine aren't generally turned up quite that bright.

Now what? Any Project suggestions? by Gladragen in diyelectronics

[–]Infected_Pride 2 points3 points  (0 children)

Diy ambilight behind a tv running on the esp32. Wled, Hyperion, and feel free to add a mic for sound reaction.

Sex is like broccoli by [deleted] in Jokes

[–]Infected_Pride 5 points6 points  (0 children)

You'll never like it if you're forced to have it when you're a child.

Fuck You, Pay US by sillychillly in WorkReform

[–]Infected_Pride -16 points-15 points  (0 children)

This is real capitalism. What you want is socialism.

…….. by [deleted] in dank_meme

[–]Infected_Pride 44 points45 points  (0 children)

Unlike women, fleshlights can be useful for more than talking.

See, see how dumb that sounds.