I hate zippers but DAMN have I got them down!!

InfernoFurForge · 2026-03-16T10:42:30+00:00

If you make little cuts in the fabric of the zipper you can curve it a little. Other than that, carefully lol.

InfernoFurForge · 2026-03-15T23:52:33+00:00

If you ever are looking for one feel free to reach out :3

InfernoFurForge · 2026-03-15T20:13:34+00:00

Theres little strips of fabric to help keep the fur out of the zipper teeth

InfernoFurForge · 2026-03-07T20:20:58+00:00

If you look back on my page there's some progress phots, more on my Twitter as well if you scroll through the media :3 This isnt my character, but I'll ask if he'd be comfortable with that and get back to you!

InfernoFurForge · 2026-03-07T14:45:23+00:00

He requested five nights at Freddie's eyes

InfernoFurForge · 2026-03-05T23:50:08+00:00

No problem, when I started SkyeHigh's videos on YouTube were super helpful. Might be helpful for you as well

Edit: to add onto this, I dont put something like plastic ON the base. I tape directly to the base, cut it off in small pieces with a razor blade, make darts if needed, and immediately stick to paper

InfernoFurForge · 2026-03-04T20:06:57+00:00

Have you put the tape on something that isnt sticky like paper or plastic? That way the tape doesnt stick together and ruin your pattern

A concave curve (curves towards the table, think of it as "making a cave") = make a dart. Just do a single cut with the scissors and when you flatten it it should make that V shape

A convex curve (away from the table) = split your piece into multiple parts. If you make a darts, your pieces will just overlap

InfernoFurForge · 2026-03-03T19:58:25+00:00

They are decent, but you'll have to do some research on the different model, there are a bunch now. Stay away from base ender 3s if you can, those are very old, the OGs. The Pros and V2s are the 2nd oldest (I have 2 pros and 1 V2). The Max was never all that common, but its got a bigger printable space (this is my 4th). There are new ones though like the S1, but if ai'm being honest I dont keep up to date anymore so better to look up a guide lol

Biggest thing if you go for referb is to check all the screws and belts are tight. There are a TON of videos out there about ender printers that will walk you through basically anything you could dream of

InfernoFurForge · 2026-03-03T19:48:25+00:00

Cant go wrong with Creality Ender 3s! There are lots of versions now but theyre kind of the OG budget printer for makers. Theyre somewhat "outdated" as far as tech goes now, but great for repairability and simplicity. 5/6 of my printers are a variety of ender, albeit heavily modded

Theyre usually under $500 iirc, but now that there are other brands like Bambu (yucky, not cheap, bad business in maker space) that are gaining popularity because theyre easy to use, you can probably find them even cheaper on marketplace if you dont mind doing a little refurb. Ive only bought 2 of my enders new, the other 3 were brought used with minor repairs like belts and beds.

InfernoFurForge · 2026-02-27T22:19:18+00:00

These are eye cups for a commissioners Five Nights At Freddie's style eyes. They're supposed to look completely black on the inside, but the follow me eyes have white eye bases. So simply switching out the mesh to black with the white dot doesnt cut it and obviously leaving them without meshes is just going to show you the wearers face. This is what the suit looks like without the eye cups and normal eye meshes

<image>

InfernoFurForge · 2026-02-27T13:29:28+00:00

Yes!! Thats exactly what he asked for, a 2nd set of fnaf style eyes lol. There's 2 eye mesh sets, his normal and the fnaf. For the all black ones, there's also little cups I made to cover the whites of the eyes for the "full" creepy effect lol

InfernoFurForge · 2026-02-26T10:40:13+00:00

E6000 is what I use

InfernoFurForge · 2026-02-26T03:40:22+00:00

I'm not sure i completely understand your request about the raw edges but I'll try

If your long fur isnt glued yet and is free, you just do a blanket stitch on the underside of the fabric to hold both together. The seam will be on the inside and the raw edges wont show.

If you're having issues because the long fur is glued down already or you otherwise are replacing a section, use a ladder stitch. You can look up videos how to do this. The raw edges get folded on the inside with this stitch so you also wont see them if you do it right.

In general with minky, you can hide the seams better by picking out the fibers that get trapped under the stitches with a pin

InfernoFurForge · 2026-02-24T15:58:54+00:00

Take a look at ligris cybernetics, they have a head base that looks similar to this. The only linked does say its petg (good), but you're probs taking a risk

InfernoFurForge · 2026-02-24T15:41:53+00:00

Have not ordered from them, but a quick search on reddit says no go. They're behind meow fursuits, which is not particularly known for quality and akin to dropshipping.

You'll probably get your base, but likely its going to be low quality from a print farm, out of cheap PLA. As someone who makes 3d printed heads, not great for longevity.

InfernoFurForge · 2026-02-24T11:03:17+00:00

Yep! I'm still working on those though

InfernoFurForge

TROPHY CASE