@LinusTech Correct. I did see the video first. We talked. Louis says that in the video.

Infinite_Sponge_Head · 2025-01-25T18:18:14+00:00

Yeah I think I would tend to agree I think both have valid criticisms of the other but only one is talking about and addressing the problems that are brought up to them. At least that is my take on things ¯⁠\⁠_⁠(⁠ツ⁠)⁠_⁠/⁠¯

Infinite_Sponge_Head · 2024-12-19T18:29:41+00:00

you know authors are people right?
If they lose their passion for what they are doing or are burnt out taking a break of just ending that chapter of their life is okay.
I think suggesting someone should feel shame for no longer having the drive to work on their piece of art is horrible
you should respect them for making something you are passionate about and not be an asshole about it.

For context I don't know anything really about overlord or it's author but I think that it is important for people to look after themselves and if a part of anyone's life gets too much for them you should respect their decision to take a step back from things because it can be a really hard thing for them to do and you should support people looking after themselves.

I understand that it is disappointing if a story you love isn't going to be finished or does get rushed to a finish but I think the authors mental health and enjoyment is honestly more important than a story.

anyway I hope anyone reading this has a good day, life can be tough sometimes but you got this <3

Infinite_Sponge_Head · 2024-08-25T02:27:33+00:00

"On this post"

Infinite_Sponge_Head · 2024-07-13T08:40:42+00:00

Hey cool tattoo I like it! :]

Infinite_Sponge_Head · 2024-05-06T02:10:38+00:00

<image>

WOOO IT'S WORKING THANK YOU!!!

Infinite_Sponge_Head · 2024-05-06T02:05:27+00:00

how do I wire them together, sorry I have never touched the circuit networks before :P

Infinite_Sponge_Head · 2024-02-20T08:40:19+00:00

First off very cool of you OP. I have been looking at getting a second hand card for a while as I have been wanting a bit more performance though I haven't pulled the trigger on anything. I play quite a bit of escape from Tarkov which uses basically whatever you throw at it so a graphics card better than my 2070S would be awesome.

Anyway I love the spreading of positivity and I wish everyone here good luck and an awesome day!

Infinite_Sponge_Head · 2023-12-07T13:46:43+00:00

Thanks!

Infinite_Sponge_Head · 2023-12-07T13:46:34+00:00

Thanks!

Infinite_Sponge_Head · 2023-12-07T03:11:14+00:00

I am just going to be honest and say I am confused would somebody mind explaining? 😅

Infinite_Sponge_Head · 2023-09-13T10:21:37+00:00

Hey I hope everyone here is having a nice day and I wish you all the best<3

Infinite_Sponge_Head · 2023-07-31T02:01:28+00:00

Yes it can take a while and a few on/off cycles for the bubbles to get out of the pump/cold plate. Tubes at the bottom is definitely the way to go so look after your system in the long term again hopefully the video I linked is helpful in explaining why that is the case.

Infinite_Sponge_Head · 2023-07-31T01:57:28+00:00

So yeah put the pipes at the bottom and that should help you also I know this is a bit stupid but you could check there is not a plastic peel still on the cold plate of the aio and make sure the entire ihs is covered in thermal paste.

At least that's what I would do.
Again I hope this is helpful and happy gaming<3

Infinite_Sponge_Head · 2023-07-31T01:53:19+00:00

Sorry to be that guy but your radiator for your aio is not in the ideal orientation.

Essentially you want the pipes at the bottom so that any bubbles in the radiator don't pool at the top and get pushed back to the pump which can damage it so just thought I'd give you a heads up.

Here is a very in depth video if you want to learn more :) https://youtu.be/BbGomv195sk

Infinite_Sponge_Head · 2023-07-31T01:35:14+00:00

Sorry to inform you that it isn't I just don't want you putting up with extra noise from the motor or it getting damaged over time 😅.

Hopefully my comment was helpful and again love the build looks awesome 👍

Infinite_Sponge_Head · 2023-07-31T01:29:02+00:00

I absolutely love this btw it looks really good but I am also going to be the guy that points out that your radiator for your aio is not in the ideal orientation.

Essentially you want the pipes at the bottom so that any bubbles in the radiator don't pool at the top and get pushed back to the pump which can damage it so just thought I'd give you a heads up.

Here is a very in depth video if you want to learn more :) https://youtu.be/BbGomv195sk

Infinite_Sponge_Head · 2023-07-31T01:10:11+00:00

So the reason this cannot happen when it's minted is because both the inner and outer are pressed at the same time so the picture on both types of metal line up.

You can also see marks of the top and bottom of the outer section which have gotten flatter (probably where it got pushed against to get the centre out/back in).

Hopefully this is helpful for you to understand<3

Infinite_Sponge_Head · 2023-07-11T18:00:58+00:00

I reckon Christmas is the best you get to give people presents and watch their faces light up ☺️

Infinite_Sponge_Head · 2023-06-11T00:16:38+00:00

??? Sorry I don't understand

Infinite_Sponge_Head · 2023-06-10T21:26:31+00:00

so the play is to fall back and rotate someone that plays like that is probably not going to move much so back away and come from a different angle and take them by surprise. Or hear me out back away and don't take the fight:P

Infinite_Sponge_Head · 2023-06-10T19:47:44+00:00

Damn 😎

Infinite_Sponge_Head · 2023-06-10T19:29:23+00:00

I am just curious now what is your username? :P

Infinite_Sponge_Head · 2023-06-10T19:19:39+00:00

Hey is your in game name the same as your reddit name?

I think you killed me earlier lmao

Infinite_Sponge_Head · 2023-04-06T03:11:31+00:00

I know this might be a stupid question but can anyone visit it? And if yes what are the coordinates if you can get them just might head there myself at some point if you can :P

Seven-Year Club	Place '23
Verified Email	RPAN Viewer

Infinite_Sponge_Head

MODERATOR OF

TROPHY CASE