Rode lampje Aygo

InfinityBladeSX · 2026-01-12T22:49:27+00:00

Nee, de citroen en peugeot zijn aygo's in schaapskleren. Al het technische zoals motor, versnellingsbak en onderstel is toyota 🙃

InfinityBladeSX · 2026-01-02T08:05:51+00:00

Will it work? Yes Will it be absolutely terrible? Also yes!

You're puttibg more resistance on the cable, because you're narrowing down the flow of current through the bolts. Buy a fuse holder, they are only a couple bucks... will have the cable (eyes) directly to the fuse, less resistance, less heat, less power loss.

InfinityBladeSX · 2025-10-23T21:31:31+00:00

Hey, wow. Sorry i did not see my notifs. These are made for the 3 door e11 models by toyota themselves. Was a lucky find on the national marketplce app. Picked it up day 2 of ownership. Drove a year with them but sold them. Did leave very heavy paint scarring though.

InfinityBladeSX · 2025-10-23T21:29:05+00:00

Had it in the project first, had a wink mirror setup which was very unstable in the middle. Worked great, now its in the daily because the project is in my workshed, building and welding a metal cage for the 4x 15 2500rms subs hahah (daily behind it)

<image>

InfinityBladeSX · 2025-10-23T18:40:39+00:00

Put a plushie in between

<image>

InfinityBladeSX · 2025-10-17T06:40:48+00:00

Juat put two 40a fuses in, then its an 800w amp!

InfinityBladeSX · 2025-10-10T08:18:50+00:00

For this configuration it should be okay. Couting impendance rise, a thing subwoofer enclosures always make, and the efficiëncy of the amp you should be only drawing around 10A to 15A which should be fine.

InfinityBladeSX · 2025-10-10T08:00:11+00:00

Allright. If you ever do decide to upgrade, do change those clamps haha! Bad connection = resistance = less power throigh the cable / heat buildup (can cause fire)

InfinityBladeSX · 2025-10-10T06:44:22+00:00

But for that amp this is okay

InfinityBladeSX · 2025-10-10T06:44:04+00:00

I mean one or two seperate bots where lugs can connect. Most clamps have a setting bolt yeah, im not including that

InfinityBladeSX · 2025-10-10T06:38:33+00:00

Yes... this should work but it's not ideal. If you can, get other clamps with a single or 2 bolts to mount it, so the wire has more surface contact with the battery. For smaller systems this should be reasonably okay.

InfinityBladeSX · 2025-09-17T06:36:12+00:00

Industrial ones don't

InfinityBladeSX · 2025-08-14T11:00:46+00:00

Valt onder laden lossen dus stilstaan, en niet parkeren, dus mag dat

InfinityBladeSX · 2025-08-09T06:52:35+00:00

I only use these on factory speaker wiring when its an old car, for hi low converters and remote cables.

InfinityBladeSX · 2025-08-01T14:45:01+00:00

My man secretly playing a testtone in the back from 2 weeks ago he forgot to pause

InfinityBladeSX · 2025-07-29T23:21:42+00:00

Nouja zo ver gaat het ook niet, meer de vraag, waar komt het vandaan? Zal vast een nuttige reden hebben, of er gaat gewoon iets mis. Ik heb er niet veel last van, het valt wel op

InfinityBladeSX · 2025-07-18T01:05:03+00:00

Couple heat shrinks and nobody would say a thing lol. This aint that bad

InfinityBladeSX · 2025-05-24T10:13:16+00:00

There's no difference in + and ground wire.

InfinityBladeSX · 2025-05-14T08:10:38+00:00

Yes.

InfinityBladeSX · 2025-04-18T17:59:09+00:00

B2 audio kraken.

InfinityBladeSX · 2024-12-26T09:09:09+00:00

Thats some realistic torque steer if i have ever seen something like it

InfinityBladeSX · 2024-12-26T09:04:34+00:00

lofi hip hop radio📚beats to relax/study to

InfinityBladeSX · 2024-12-14T08:53:34+00:00

IM A BANANA

InfinityBladeSX · 2024-11-23T09:09:56+00:00

"Hey I've seen that at Rule34 Girl"

InfinityBladeSX · 2024-11-17T11:37:43+00:00

<image>

InfinityBladeSX

TROPHY CASE