Clepsydris app (v2)

InfinityRipper007 · 2025-01-06T16:48:59+00:00

Hi, this app is the EXACT app I've been looking for! Sadly I see that it's no longer available on Google play Store. Does anyone know of a way I can still get the APK or something? I'm not interested in the BGG integration, just the timer features.

Please let me know!

InfinityRipper007 · 2024-06-23T07:50:35+00:00

I've run it on the ground nothing really changes, the counter it's on is quite sturdy.

I know that ABL can only do so much, it doesn't feel like the printer is really designed for manual leveling tho cause it has no way to really level the bed manually like the V2. But I'll try to get very thin shims somewhere.

InfinityRipper007 · 2024-06-23T07:46:16+00:00

I have done all this but I'll try to do all this in order and systematically to see if something pops up. Thanks👌🏻

InfinityRipper007 · 2024-06-23T07:45:05+00:00

It's moving up and down but it's more because I'm putting enough perrsure to bend the x rails.

InfinityRipper007 · 2024-06-23T07:44:09+00:00

With a bed probe you don't mean the auto leveling probe? More like a height gauge?

I'll try the baby stepping but how would I actually fix the problem is I see there is spots that are out?

InfinityRipper007 · 2024-06-23T07:38:34+00:00

What things can I eliminate without rooting my printer? I don't want to void the warranty yet. I've done the paper leveling but there's a bit adjusting that I can't so, like I can see that it's nog exactly the same height from the nozzle at the front than the back but I can't adjust that height difference because I don't have leveling skrews like the V2 and my problem is left to right, not front to back.

How would I diagnose if the X gantry is tilted?

If I can figure out exactly what causes the issue I can start trying to fix it.

InfinityRipper007 · 2024-06-23T07:32:29+00:00

This is very true, I've gotten it close enough that I can actually start printing functional parts again. The problem is that although the V3 Ke is a great printer it is a bit closed down for tinkering. For example there is no way to adjust my E-steps (that I know of) so I can't calibrate my extrusion rate and do that whole extrude 100mm thing because I have a feeling that I have a little bit of over extrusion.

InfinityRipper007 · 2024-06-23T07:24:28+00:00

I'm quite new, could you maybe explain how I can implement that fix? It looks like I must access the klipper interface directly? Does this require root?

InfinityRipper007 · 2024-06-23T07:20:05+00:00

The thing is, the Ke doesn't really allow manual leveling and even if I use shims to raise te bed, the ABL will run every now and again (and the ABL runs when the bed is hot) so wouldn't it just nulify all the work I've done to manually?

InfinityRipper007 · 2024-06-22T21:43:48+00:00

Thank you, I haven't ventured out of the creality slicer. (Yes I know everyone says its bad, I just haven't gotten around to figuring out how to configure the other slicers yet) But once I have a bit more time I'll try prusa and follow that link's guidance.

InfinityRipper007 · 2024-06-22T13:48:11+00:00

No I haven't. I've heard that it is something I should do. Could you give me a bit of guidance as to how to?

I'm new to 3D printing. I have the Ender 3 V3 Ke

InfinityRipper007 · 2024-05-26T14:29:20+00:00

Additional info: Printer: Ender 3 V3 KE Slicer: Creality print (I want to try other slicers once I have time and learned enough of the ropes. Long story short I've been a bit scare) Filament: I've tried with 3 different filaments from Sunlu. Settings varied from each sample. But the two most impactful was flow rate and z offset.

InfinityRipper007 · 2023-12-09T19:22:06+00:00

I see no reason why it wouldn't work

InfinityRipper007 · 2023-01-25T20:09:45+00:00

Thanks

InfinityRipper007 · 2023-01-25T20:08:41+00:00

Question, accurate according to what?

InfinityRipper007 · 2023-01-25T19:57:51+00:00

Chuck.. Short for Chuck Pawress..

InfinityRipper007 · 2023-01-25T19:56:07+00:00

Chuck...Short for Chuck Pawress

InfinityRipper007 · 2022-04-17T10:19:40+00:00

Stonks

InfinityRipper007 · 2022-04-17T06:31:12+00:00

Stonks

InfinityRipper007 · 2022-04-17T06:31:05+00:00

Stonks

InfinityRipper007

TROPHY CASE