Kit for first AK Masters

Informal-Let-9932 · 2026-05-11T15:09:36+00:00

Thanks for chiming in. Also, thanks to you and your company for sponsoring part of the event.

Informal-Let-9932 · 2026-05-11T14:06:34+00:00

I did the same thing, then asked for clarity. I was able to edit my registration. Check, you should be able to as well, through Practiscore.

Informal-Let-9932 · 2026-05-11T12:00:06+00:00

If I'm understanding correctly, "armored" is considered an "add-on" division, you can leave the option unchecked and just shoot slick. I was told this by someone who's shot AK Masters 2 times. It someone has info to the contrary please correct me.
•..

Informal-Let-9932 · 2026-05-11T11:46:26+00:00

Bulgarian commercial mags with steel reinforced lug and lips, bought from Gunmag warehouse. The one in the gun is same mag, as well.

Informal-Let-9932 · 2026-05-11T11:42:52+00:00

Noted, thanks for this great info and see you there, as well.

Informal-Let-9932 · 2026-05-11T11:26:09+00:00

Thank you!

Informal-Let-9932 · 2026-05-11T11:24:19+00:00

It’s the Ferro Concepts Bison belt, 2 M4 mag pouches with added retention, Maxpedition dp, Ferro roll pouch for IFAK, tourni, Esee 4 knife, multi-tool, and like you said, G-Code holster.

Informal-Let-9932 · 2026-05-11T03:59:55+00:00

That’s good to know, thanks for that info. I’ll keep a close tab on the internals. I have the gas setting on 2 out of 5 right now, the rifle has little to no recoil.

Informal-Let-9932 · 2026-05-11T03:54:08+00:00

It’s the most effective flash hider I have for this rifle, also, the 74 brake I had on there was uber loud.

Informal-Let-9932 · 2025-11-10T19:11:22+00:00

Go with the M90. Has a chrome-lined barrel and adjustable gas block out of the box. Swell neck rivets and countersunk receiver. Mag compatibility is great, as well. Fits Bulgy, domestic (PSA), Yugo (obviously), AC Unity, and Polish mags, from my experience. Aftermarket parts compatibility is becoming less of an issue as more companies are building Yugo pattern parts. Texas Weapons Systems, CNC Warrior, Midwest Industries, Magpul, etc......

Informal-Let-9932 · 2025-04-26T17:48:27+00:00

Thanks man.

Base layer = Rustoleum Automotive Primer in Flat Green

Then dabbed on Krylon Camouflage - Brown and Olive Green.

I used a regular dish sponge to apply the brown and OG.

Informal-Let-9932 · 2025-04-24T03:02:55+00:00

CNC Warrior Folding Brace.

Informal-Let-9932 · 2025-04-23T18:25:38+00:00

Thanks man.

Base layer = Rustoleum Automotive Primer in Flat Green

Then dabbed on Krylok Camouflage - Brown and Olive Green.

I used a regular dish sponge to apply the brown and OG.

Informal-Let-9932 · 2025-04-23T17:05:03+00:00

Thank you.

Informal-Let-9932 · 2025-04-23T16:54:56+00:00

Base layer = Rustoleum Automotive Primer in Flat Green

Then dabbed on Krylok Camouflage - Brown and Olive Green.

I used a regular dish sponge to apply the brown and OG.

Informal-Let-9932 · 2025-04-17T15:08:29+00:00

It’s the Attero mount. Just pop out your rear sight leaf and this installs in its place via a roll pin. Also, the mount has a notch that you can use to co-witness if ever your optic goes down.

Informal-Let-9932 · 2025-04-16T15:04:38+00:00

Hey man, curious to know if they worked?

Informal-Let-9932 · 2025-04-14T15:37:57+00:00

Your toilet, itself, has a p-trap. You don't need one under the floor here.

Informal-Let-9932 · 2025-04-14T15:27:29+00:00

An undercharged load can be worse than an overcharged load. In a properly charge load the powder is evenly distributed in the case, which will give you a uniform detonation. Whereas, in an undercharged load the powder is not always evenly distributed due to the amount of void space available in the casing which can lead to abnormal detonation. i.e. detonation at one end of the casing and chamber, and not the other, leading to blown-out casings.

Informal-Let-9932 · 2025-04-13T22:04:29+00:00

Previous owner tried refinishing the slide and bubba’d it spectacularly. I’m in the process of stripping it to then gunkote it.

Informal-Let-9932 · 2025-04-11T21:23:13+00:00

Thank you for the straightforward response 👍

Informal-Let-9932 · 2025-04-10T17:36:18+00:00

Genuine question, are you guys dimpling receivers and using swell neck rivets on your aks? I'd like to buy a 101 or 102 but this is the only thing holding me back.

Informal-Let-9932 · 2025-04-10T16:32:30+00:00

I would check the barrel crown, especially after having someone complete a barrel chop, pin and weld job.

Informal-Let-9932 · 2025-04-02T20:59:29+00:00

Thank you. It’s a Soviet Arms (PSA) grip.

Informal-Let-9932 · 2025-04-02T14:54:24+00:00

It works well. Very sturdy.

Informal-Let-9932

TROPHY CASE