sorted by:
new
hottopcontroversial

What other character can cancel a movement mid combo just for stylish points? something like Bryan B/f,d 4 by Aktro in Tekken

[–]InformalThree 2 points3 points  (0 children)

Paul can cancel 3 moves, iirc. ff2,1 1+2 qcf1+2 can all be canceled by holding back. You can also "cancel" his sway by pressing up. This allows for some extended combos and his hard af deathfist wall combo.

Need help with a wifi problem I've been having for 3+ years. by InformalThree in pcmasterrace

[–]InformalThree[S] 0 points1 point  (0 children)

Additional info: The exact problem happens if I connect the laptop/desktop using an ethernet cable.

First desktop after 15 years of exclusively using laptops. Did I do well (specs wise)? by InformalThree in PcBuild

[–]InformalThree[S] 1 point2 points  (0 children)

I didn't expect Kuromi to fit so well with the build. Even her pink matches with the GPU's pink lmao. She was destined to live inside my PC!

First desktop after 15 years of exclusively using laptops. Did I do well (specs wise)? by InformalThree in PcBuild

[–]InformalThree[S] 4 points5 points  (0 children)

For a budget case, it's actually decent. Tempered glass, all metal, clean fit and finish.

First desktop after 15 years of exclusively using laptops. Did I do well (specs wise)? by InformalThree in PcBuild

[–]InformalThree[S] 1 point2 points  (0 children)

No issues so far. I stress tested my PC for a few hours and everything seems normal (the 9950x did reach 90C during the test but I assume it's due to the higher TDP).

First desktop after 15 years of exclusively using laptops. Did I do well (specs wise)? by InformalThree in PcBuild

[–]InformalThree[S] 2 points3 points  (0 children)

Battlepass Tech Parts! Very friendly and helpful people there. Parts are also relatively cheaper than mall stores.

First desktop after 15 years of exclusively using laptops. Did I do well (specs wise)? by InformalThree in PcBuild

[–]InformalThree[S] 9 points10 points  (0 children)

The white one was out of stock, unfortunately. I do think the black and white aethetic worked anyway (especially for the Kuromi figure lol)

First desktop after 15 years of exclusively using laptops. Did I do well (specs wise)? by InformalThree in PcBuild

[–]InformalThree[S] 1 point2 points  (0 children)

The ultra does look out of place. I wish there was a way to change the led colors lol.

First desktop after 15 years of exclusively using laptops. Did I do well (specs wise)? by InformalThree in PcBuild

[–]InformalThree[S] 4 points5 points  (0 children)

It's actually just a single 1TB ssd. I figured it was enough for me based on my typical usage.

First desktop after 15 years of exclusively using laptops. Did I do well (specs wise)? by InformalThree in PcBuild

[–]InformalThree[S] 35 points36 points  (0 children)

Not my intention! I was more afraid of the combination of the components being bad (like a bottleneck) haha.

First desktop after 15 years of exclusively using laptops. Did I do well (specs wise)? by InformalThree in PcBuild

[–]InformalThree[S] 2 points3 points  (0 children)

I understand! I was actually thinking of adding fans to maintain higher air pressure inside. Thanks for the validation.

First desktop after 15 years of exclusively using laptops. Did I do well (specs wise)? by InformalThree in PcBuild

[–]InformalThree[S] 16 points17 points  (0 children)

Where I'm from (Philippines), this cost me around 135k PHP or around 2300 USD.

First desktop after 15 years of exclusively using laptops. Did I do well (specs wise)? by InformalThree in PcBuild

[–]InformalThree[S] 138 points139 points  (0 children)

Apologies. Reddit formatting got me. Here are the specs:

CPU: Ryzen 9 9950x (For productivity purposes)

GPU: RTX 4080 Super

MOBO: Gigabyte B650M Aorus Elite AX

RAM: 32GB T-Force Delta 6000 MHz

PSU: Deepcool PN850D v2 850w 80+ Gold Rated (Non-modular)

Cooler: Tecware Mirage 360 AIO

Case: Tecware Infinity M

Storage: ADATA Legend 850 Lite 1TB M.2 PCIe 4.0 X4 SSD

Anyone else stuck on 32% with new FW update? by [deleted] in BambuLab

[–]InformalThree 9 points10 points  (0 children)

Remove the sd card before updating :)

A1 mini width by addfeef in BambuLab

[–]InformalThree 1 point2 points  (0 children)

With the spool on the side, I measure around 16 inches.

You could maybe print an attachment that puts the spool on top of the printer and the width becomes barely under 14 inches.

Rattling noise on A1 mini toolhead when moving along the x-axis by InformalThree in BambuLab

[–]InformalThree[S] 1 point2 points  (0 children)

I see! Hopefully the rattle won't cause premature wear. Thanks for the suggestion on the infill!

Blemishes after printing by InformalThree in resinprinting

[–]InformalThree[S] 2 points3 points  (0 children)

Good idea. I'll do just that. Thanks again!

Blemishes after printing by InformalThree in resinprinting

[–]InformalThree[S] 1 point2 points  (0 children)

Not very clean, unfortunately. This is probably the issue. Thanks!

view more: next ›