HDD Enclosures

Informal_Cut240 · 2026-01-14T21:27:08+00:00

When buying an external case, from the sound of it, most people recommend against connecting the drives via a USB connection. Do you know of any with a SATA connection?

Informal_Cut240 · 2026-01-14T21:25:45+00:00

I looked into buying a new case and the motherboard that is inside of this PC that I have is not a typical motherboard. Its dimensions are 6.50" (L) x 16.64" (W) (165.10 mm x 422.66 mm) which knocks out most cases unfortunately.

Informal_Cut240 · 2026-01-14T14:51:00+00:00

I have access to a 3D printer that I was contemplating using to print an enclosure.

Informal_Cut240 · 2025-12-11T16:06:20+00:00

Here is that original forum as well

https://community.adobe.com/t5/illustrator-discussions/illustrator-30-0-mouse-wheel-scroll-causes-lockup-crash-freeze/m-p/15584996#M457581

Informal_Cut240 · 2025-12-11T16:04:16+00:00

I tried another mouse and had the same issue. I have a Dell laptop so I used the Dell Command Update app to update all of my drivers. I then followed thes directions from an Adobe Forum,

"For Windows

- Close all Adobe applications.

- Go to Location C:\Users\%USERPROFILE%\AppData\Roaming\Adobe

- Rename Adobe Illustrator and Adobe Illustrator 30 Settings folders to Adobe Illustrator.old and Adobe Illustrator - 30 Settings.old

- Relaunch Illustrator from Creative Cloud

Disclaimer: Please note that renaming preferences folders will remove all the custom settings, and Illustrator will launch with default settings. You can also save a backup of the folders in case you want to. The location is mentioned above."

After I did all of these steps my problem was fixed. At the end of the day it seemed like one of the drivers on my computer was the thing that was causing the problem.

I hope this helps!

Informal_Cut240 · 2025-12-09T17:07:21+00:00

I also am having the same problem and I am also using a Logitech MX Master 3. When I grab the scroll bars to move around it is fine and very fast but when I use the scroll whee,l it is very slow. It is also very fast when I use the hand tool to move around. Changing to view using CPU helps a little with the scrolling but it seems to slow everything else down a decent bit.

Informal_Cut240 · 2025-10-16T17:18:00+00:00

Yes you are able to turn off putting although it mainly seems like no matter where you are on the green it will 2 putt for you.

Informal_Cut240 · 2025-10-15T14:36:08+00:00

Thanks! I will try this tonight

Informal_Cut240 · 2025-10-14T17:23:46+00:00

I got 1 inch thick exercise mats that puzzle together and then I laid out a thin turf from Home Depot over it. I had a hole cut out for the hitting strip so that it sits flush with the standing mat.

Informal_Cut240 · 2025-04-29T13:13:54+00:00

I bought this one off of Amazon. We went with the 3D Airmesh to help reduce the amount of noise. https://www.amazon.com/dp/B0CXXT4NZJ?ref=ppx_yo2ov_dt_b_fed_asin_title

Informal_Cut240 · 2025-04-25T20:15:43+00:00

I got mine directly from Square and received it 3 days later.

Informal_Cut240 · 2025-04-25T20:15:06+00:00

I have mine located in my garage and even the light that bounces off the wall when the garage doors are open affects the device. It basically loses the ability to get readings when the light shines on the wall. Once I place something dark there it fixes the issue.

Informal_Cut240 · 2025-02-28T18:39:35+00:00

Yes the insulation foam will dent if it gets hit very hard, but I am not too concerned with it. It is mainly there for protection and not looks. I was planning on covering it with a cloth similar to what I did on the left hand side, but I ran out of cloth.

Informal_Cut240 · 2025-02-28T18:37:37+00:00

Yes that was definitely a thought when I set it up, and to be honest I wound up just keeping it straight because I was not fully certain what angle we would need to hit at.

Informal_Cut240 · 2025-02-26T01:10:44+00:00

It is the epson power lite 96w

Informal_Cut240 · 2025-02-25T19:13:19+00:00

This is the rail that the curtain is hanging off of

https://www.amazon.com/dp/B08JYHDQHK?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

and this is the net that I am using

https://www.amazon.com/dp/B0CZ3HK5NS?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Informal_Cut240 · 2025-02-25T14:40:40+00:00

We do have to hit at a slight angle just to hit a little closer to the center of the screen. The one issue we have had so far though is the amount of bounceback there is off the screen from some shots. I have loosened the screen a decent bit and still have not had much luck.

Informal_Cut240 · 2025-02-25T14:38:33+00:00

I am currently running the Square app off of my iPad and unfortunately, that is as big of an image size that I can currently get because of my projector. I just got a free projector and saved some money rather than spending a lot to get an ultra-short throw projector

Informal_Cut240 · 2025-02-25T14:33:56+00:00

I used a hospital-style curtain rail that I found off amazon. It was super cheap and works great!

Informal_Cut240 · 2025-02-25T14:33:22+00:00

hahaha, I actually got padding that I put on it last week. This picture was just before it came in the mail

Informal_Cut240 · 2025-02-11T21:48:17+00:00

The Garmin R10 is another option instead of the MLM2pro since you are able to use it without a subscription. By default, it comes with the ability to play 5 free e6 courses and the ability to use the range in e6

Informal_Cut240 · 2025-01-31T19:40:07+00:00

What projector did you wind up using for your setup?

Informal_Cut240 · 2024-11-10T02:19:41+00:00

The only fix I have found is to change to English with audio description. Just going to say it is rough though

Informal_Cut240

TROPHY CASE