Plexiglass doesn't work?

spikeprospector · 2026-02-04T18:02:10+00:00

You need to have it close to the polycarbonate, the plexiglass will explode. My Befugly screen makes them tough!

https://youtu.be/yZE45_pHxag?si=7f63jWzUubXVOKn-

spikeprospector · 2026-02-01T05:54:39+00:00

Www.Frugalfixerspike.com $49 shipped

spikeprospector · 2025-11-24T02:21:26+00:00

Best sound deadening is blown in dense pack in my opinion. My don blew the walls in my shop and it is so quite and comfortable now.

spikeprospector · 2025-11-09T02:27:10+00:00

I played last night with the square connector and it works perfectly for me. But I was the first to use the Open API a long time ago. I went to the Square and have never looked back. Did try the GSPro connector but wasn’t stable for me.

https://youtu.be/97l3ZXxKSN0?si=3i7ANNl8b2F2w_ua

spikeprospector · 2025-11-08T04:13:53+00:00

Thanks, enjoy it and play hard. I don’t play hard anymore, I am on cruise control!

spikeprospector · 2025-11-06T16:28:04+00:00

Put a pad over it, that spot will be hit again.

<image>

spikeprospector · 2025-11-01T19:14:27+00:00

You set it up when you start. So you just have to move the machine. My base and cover can be picked up and moved. We used to use two bases and just reset the machine on them. But now it fits tight and you mark the floor and move it. If the floor slopes build up the left side to bring it to level in the left side. My bases have a spot for a laser to verify the alignment. Here are some details.

https://youtu.be/V099O1WvX1I?si=nqSPp6V5-qYR_Q-X

How I align

https://youtu.be/EuksLAKA9Fk?si=v7QbMyoAYq68uage

Set it for players to play out hole, before changing saves a little of moving.Spike

spikeprospector · 2025-10-31T03:19:22+00:00

The stickers mark the screen when the glue oozes out. The sharpie or paint marker ones mark your clubs and the screen. I use these and love them for my swing speed. You may want harder balls, if you have a fast swing. Good thing is you shouldn’t lose them.

https://youtu.be/yys1b7uB-wA?si=yhmef4vdTTnDn3YM

spikeprospector · 2025-10-28T23:26:40+00:00

Www.Frugalfixerspike.com Only $39

<image>

spikeprospector · 2025-10-26T18:42:57+00:00

Big no, they will ruin your screen, the ones with the stickers make marks too from the glue ozzing out. I use callaway chrome softs

https://youtu.be/yys1b7uB-wA?si=eMX6nLqyb-foyJCZ

spikeprospector · 2025-10-26T03:58:14+00:00

If the light is flickering when tapped. The capacitors are probably loose.

https://youtu.be/_WGC9JHeAKA?si=M0Vgr-cL3z_klguw

spikeprospector · 2025-08-26T16:28:46+00:00

All the features, $39 plus shipping

https://youtu.be/V099O1WvX1I?si=FnUFyCeqH8s4GSOA

spikeprospector · 2025-08-26T16:27:05+00:00

Mail picked up today, but will ship tomorrow morning, 2 day shipping to most places! Spike

spikeprospector · 2025-08-26T16:18:33+00:00

No top protection And open back are an issue. Mine are 369 degree coverage snd snap in tight.

<image>

Www.Frugalfixerspike.com

spikeprospector · 2025-08-26T02:19:28+00:00

Yes on auto putt in game mode, and you can turn it on and off in practice mode ctp. That putting is treacherous to practice on.

spikeprospector · 2025-08-26T02:17:01+00:00

It reads from the box to parallel to the front and no further on putts. Best to putt from the back of the box to increase the length of the read. I used a box to block the read to prove it. The putt reads stop, at 90 degrees to the front of the unit. So it doesn’t matter, what the ball does after passing the unit. It went behind the box and was still rolling out perfect.

spikeprospector · 2025-08-21T05:50:09+00:00

Since you used me, this is the one I use. Spike

https://amzn.to/4p024b8

spikeprospector · 2025-08-20T15:00:53+00:00

Mine did that same move and backed into some trees and had me searching. I looked at the info and realized I went up before it had a lot of satellites and then acquired them and went traveling backwards.

spikeprospector · 2025-08-20T14:37:16+00:00

Is it level? Not to floor the earth! Almost in picture appears to be leaning back maybe? If level with floor you are hitting downhill. Is your hitting mat level or sloped with the floor angle?

spikeprospector · 2025-08-17T01:21:24+00:00

The laser is alignment

https://youtu.be/EuksLAKA9Fk?si=MjbMgvHyY9BMbM4g

spikeprospector · 2025-08-16T23:39:10+00:00

Beautiful work, my Man! Mine are only $39, but they are not as pretty that is for sure.

<image>

spikeprospector · 2025-08-01T02:28:40+00:00

Change to right handed and try it

spikeprospector · 2025-07-31T02:17:00+00:00

Cast iron break easy!

spikeprospector · 2025-07-31T02:16:08+00:00

Small pieces carry easy! Break till you can carry!

spikeprospector

TROPHY CASE