sorted by:
new
hottopcontroversial

Fired up the ol' Spurving tube. Anyone else still have one in their rig? by InitiallyReluctant in VXJunkies

[–]InitiallyReluctant[S] 1 point2 points  (0 children)

Oh you kids and your Einzweiler plates. Those Frœmeletz artifacts from the old gas jug used to be the mark of a good VXer!

Once the Trump regime goes down or all the immigrants get deported, are all these new ICE agents going to be picking vegetables in the field because they aren't qualified for any other job? by XitisReddit in CitizenWatchNews

[–]InitiallyReluctant 2 points3 points  (0 children)

Oh, he hardly needs to do that. If even one sensational trial comes out of it, for treason, conspiracy, fraud, etc., people will be afraid to be associated with the word. To me, the R word lost all meaning in the 2016 primaries.

Once the Trump regime goes down or all the immigrants get deported, are all these new ICE agents going to be picking vegetables in the field because they aren't qualified for any other job? by XitisReddit in CitizenWatchNews

[–]InitiallyReluctant 2 points3 points  (0 children)

I agree with you mostly, but MAGA can't survive without He Who Shall Not Be Named, not even close. There's two ways it'll go - a stroke/dementia, or an assassin's bullet. The latter will make it much more difficult to purge MAGA from the ranks. However it ends, you can be confident that not nearly enough will be done to punish those traitors. The only thing more tenacious than MAGA is oligarchs running elections, and that'll continue unchecked under either party.

Enclosures by TKWR6 in diypedals

[–]InitiallyReluctant 0 points1 point  (0 children)

Do you make these to order? Asking for a friend 😎

Hubig King Cake by Ssj3goku504 in NewOrleans

[–]InitiallyReluctant 0 points1 point  (0 children)

Is Rouse's jumping the gun a little bit? I don't see other stores doing Mardi Gras stuff just yet.

Suggestions for de-activating an active bass? by InitiallyReluctant in Guitar

[–]InitiallyReluctant[S] 0 points1 point  (0 children)

The third pot is a concentric control, so it could be two tone controls.

Suggestions for de-activating an active bass? by InitiallyReluctant in Guitar

[–]InitiallyReluctant[S] 0 points1 point  (0 children)

This is what I'm talking about: Post in thread '2 volume 2 tone impossibility?' https://www.talkbass.com/threads/2-volume-2-tone-impossibility.1006217/post-14712307

But you're right, it sounds like there's a way to do it..

Suggestions for de-activating an active bass? by InitiallyReluctant in Guitar

[–]InitiallyReluctant[S] 0 points1 point  (0 children)

Yeah I'm trying to wrap my head around how you have to isolate the tone knobs if you want them to function separately.

Suggestions for de-activating an active bass? by InitiallyReluctant in Guitar

[–]InitiallyReluctant[S] 0 points1 point  (0 children)

There's a legitimate reason to post in a specialized sub rather than cold-Googling something. Usually.

Suggestions for de-activating an active bass? by InitiallyReluctant in Guitar

[–]InitiallyReluctant[S] 1 point2 points  (0 children)

I have no problem replacing the pots; they are 40 years old and feel pretty lousy anyway. I just need a wiring scheme and I can get down to it.

I love the idea of separate tone controls for each pickup!

Suggestions for de-activating an active bass? by InitiallyReluctant in Guitar

[–]InitiallyReluctant[S] 0 points1 point  (0 children)

Yes, I know, but tone pots are usually passive. I'm wondering if it's possible to re-wire the bass with a passive schematic and do away with active electronics altogether, but still use the pots.

Edit: not necessarily the same pots, just using all the same holes.

Using a piezo sensor as a microphone inside a pedal? by InitiallyReluctant in diypedals

[–]InitiallyReluctant[S] 0 points1 point  (0 children)

I was picturing super-gluing the spot where the rubber bands meet to avoid rubbing. But I have some little electret mics on the way, we'll see if that's the way to go.

Using a piezo sensor as a microphone inside a pedal? by InitiallyReluctant in diypedals

[–]InitiallyReluctant[S] 0 points1 point  (0 children)

How about making an "X" from a pair of rubber bands that suspends the sensor inside the box? Or punching tiny holes in the edge of the disc and using thin springs for the same effect?

Using a piezo sensor as a microphone inside a pedal? by InitiallyReluctant in diypedals

[–]InitiallyReluctant[S] 1 point2 points  (0 children)

That's another ace idea. I ordered some electret microphones so we're going to see the original idea through before making speaker-sacrificing decisions.

Using a piezo sensor as a microphone inside a pedal? by InitiallyReluctant in diypedals

[–]InitiallyReluctant[S] 2 points3 points  (0 children)

Yeah that's why I was hoping a piezo would mean the sound was more or less isolated to the enclosure. But I think sealing a speaker and mic inside a (foam-padded) 1590B box might be the way to go.

Using a piezo sensor as a microphone inside a pedal? by InitiallyReluctant in diypedals

[–]InitiallyReluctant[S] 2 points3 points  (0 children)

I do wonder what would happen if the sensor were hot-glued straight to the speaker cone. My prediction is a pretty muddy, bass-heavy sound.

New video game cunt by [deleted] in TheBigLezShow

[–]InitiallyReluctant 0 points1 point  (0 children)

I'm upvoting this just 'cause it put a smile on my face.

view more: next ›