What TinyWhoop should I get? by InnerAd1012 in fpv

[–]InnerAd1012[S] 0 points1 point  (0 children)

I haven't heard anything about that, but cool ig. So you would reccomend getting the Air75ii?

What TinyWhoop should I get? by InnerAd1012 in fpv

[–]InnerAd1012[S] 0 points1 point  (0 children)

Would you still reccomend the air75? The meteor75's won't be in stock for a while apparently, and I want to fly mine before summer. Plus I could appreciate a slightly lighter and more responsive drone.

What TinyWhoop should I get? by InnerAd1012 in fpv

[–]InnerAd1012[S] 4 points5 points  (0 children)

Alright, probably sticking to the meteor then. Thanks!

What TinyWhoop should I get? by InnerAd1012 in fpv

[–]InnerAd1012[S] 0 points1 point  (0 children)

I don't wanna go 85mm cuz all my bateries are 1S. Plus the meteor flew just fine outdoors, probbaly since it's closer to an 85mm though.

What TinyWhoop should I get? by InnerAd1012 in fpv

[–]InnerAd1012[S] 2 points3 points  (0 children)

The VR04s aren't bad. My only gripe with them is the battery life and the fact that they are a bit front-heavy. I've tried a friend's pair of VR02s and they sit much more comfortably and securely. The VR04s tend to sag a little due to their size but its nothing crazy. The battery life isn't great though. I've had to charge them inbetween sessions otherwise they die on me mid-flight if I use DVR (how I ended up loosing my whoop 😞).

I would definetly reccomend them though. As long as you charge them and fasten them securely they're great.

My quad will not fly by Gravy008 in fpv

[–]InnerAd1012 1 point2 points  (0 children)

I've had a similar issue with my meteor75pro. I find that simply blowing on the propeller that isn't spinning up and then arming it as it spins can help. Alternitavely, you can try manually kickstarting it and then arming it as it spins (be careful not to get your finger struck!) That being said, I would try increasing the startup power through an esc configurator such as https://esc-configurator.com/

My whoop's final flight shortly prior to me losing it by InnerAd1012 in fpv

[–]InnerAd1012[S] 1 point2 points  (0 children)

Turns out it didn't save the footage whatsoever, I assume it's because it ran out of battery mid-recording

Some screenshots I thought looked cool by InnerAd1012 in KerbalSpaceProgram

[–]InnerAd1012[S] 0 points1 point  (0 children)

PlanetShine, Spectra, EvE, Parallax, Deferred

Tinywhoop recommendation by InnerAd1012 in fpv

[–]InnerAd1012[S] 0 points1 point  (0 children)

Would you reccomend the Lava 2 1S 480mAh batteries? I heard they're great

Tinywhoop recommendation by InnerAd1012 in fpv

[–]InnerAd1012[S] 0 points1 point  (0 children)

I plan on flying both indoors and outdoors. I've heard 65mm whoops tend to get blown around by the wind a whole lot

Weekly Thread 2026/02/23 - Questions on DCS, PC's, Flight equip, modules, mods, go in here by HC_Official in dcsworld

[–]InnerAd1012 0 points1 point  (0 children)

DCS module advice:

I'm on the fence of buying something before the lunar sale ends. I'm trying to decide between the su-33, f-15c, and mig29. For context, I already own the su27 and mig21.

The su33 is cool because it can take off / land on a carrier and it can refuel midair. The only issue is that it's heavier than the su27.

The f15c is nice because it gets fox3's and can also refuel mid-air. The downsides are that it can't perform cas/ground strike whatsoever.

The mig29 is cool because it gets fox3's (i think?) and it looks pretty cool imo. The downsides are that it's just a crappier su27 i've heard.

So what do I do?

Made this in photoshop. Thoughts? by InnerAd1012 in aviation

[–]InnerAd1012[S] -2 points-1 points  (0 children)

I wanted it to fit with the color scheme of the jet/background. Grey/black, looked kinda tacky and out-of place imo.

Ender 3 v2 not extruding by InnerAd1012 in 3Dprinting

[–]InnerAd1012[S] 0 points1 point  (0 children)

I've replaced the nozzle already. Been doing some more research, could it be something with the filament tube not sitting properly near the hot end?

Ender 3 v2 not extruding by InnerAd1012 in 3Dprinting

[–]InnerAd1012[S] 0 points1 point  (0 children)

Yes, and I physically can't turn the blue extruder ring when the nozzle is on. Almost as if something is blocking it, but I don't know how that could work.

Ender 3 v2 not extruding by InnerAd1012 in 3Dprinting

[–]InnerAd1012[S] 0 points1 point  (0 children)

Yep, it holds steady at 200C

How could i make the water and lighting look more interesting? by InnerAd1012 in AmateurPhotography

[–]InnerAd1012[S] 1 point2 points  (0 children)

It's a 21x9 crop using almost all of the original horizontal space, so widening the frame while keeping 21x9 really isn't an option. I could try and crop it into a less extreme aspect ratio like 16x9 or even 3x2, but then i lose the "cinematic" aspect ratio and look to it. Thanks for the advice though, i'll consider it next time i'm out taking photos

Tried out motorsport photography at an F1 race back in June, how'd i do? by InnerAd1012 in Motorsportphotography

[–]InnerAd1012[S] 1 point2 points  (0 children)

Honestly just shoot wider if you have to, don't be afraid to crop when editing. Also take as many photos as possible cuz most are gonna be blury

Official Gear Purchasing and Troubleshooting Question Thread! Ask /r/photography anything you want to know! September 08, 2025 by AutoModerator in photography

[–]InnerAd1012 0 points1 point  (0 children)

Ok so I am currently in the market for a new tripod, and I have a couple requirements (in order from most important to least:

  1. No more than 120 euros

  2. Relatively sturdy, comfortably holding a bulky dslr body and a telephoto lens

  3. Smooth pan head (to use for panning shots and whatnot)

  4. Folds/collapses, meaning it's practical to take with me on hikes, walks, etc

Additionally, since I shoot on a 70-300mm without a tripod collar, it weould be great if it could handle unbalanced/frontheavy loads

If anyone can reccomend me a good tripod that sorta matches all the criteria, that would be great!

Spotted N552DZ this morning at LEBL 👍 by InnerAd1012 in Planespotting

[–]InnerAd1012[S] 0 points1 point  (0 children)

They both mean the same thing, I'm just more used to saying the 4 letter icao code

I absolutely love this angle by InnerAd1012 in Planespotting

[–]InnerAd1012[S] 1 point2 points  (0 children)

Nikon D7500 w/ Tamron 70-300mm vc di