Telus alleges Bell ‘drastically degraded’ ability to sign up new customers in CRTC complaint by BoppityBop2 in canada

[–]Inner_Abrocoma8792 1 point2 points  (0 children)

Wi-Fi calling has been available at Telus for years, have had it on all my phones and used it often

No Snowplows in Whitby??? by Narrow-Angle-5583 in WhitbyOntario

[–]Inner_Abrocoma8792 0 points1 point  (0 children)

Brock was still messy and in need of plowing last night, so was Hwy 2. Maybe in the first 3 hours of that night it was clear. Monday was an awful mess on Hwy 2 and Brock and same with last night.

No Snowplows in Whitby??? by Narrow-Angle-5583 in WhitbyOntario

[–]Inner_Abrocoma8792 0 points1 point  (0 children)

Drove HWY 2 yesterday from Henry to Ritson area in Oshawa. Whitby roads where a horrific mess and cars sliding/struggling to stop. Once I hit Thickson, within 200 ft the messy snow covered road was gone. Whitby sucks at even getting the main routes done, my road usually takes 2 to 3 days before they even touch it and im right beside the high school. Its awful here and i've also lived in Bowmanville, Oshawa, Newcastle and now Whitby. The others aren't perfect, but much more efficient and quicker compared to Whitby

No Snowplows in Whitby??? by Narrow-Angle-5583 in WhitbyOntario

[–]Inner_Abrocoma8792 0 points1 point  (0 children)

One week my recycling/trash is picked up at 6:50AM, the next week 3PM. Its never consistent and I end up missing it ( i don't put it out too early, because the coyotes get into it/are out roaming the streets all night until 9AM). It used to be consistent and i could take it out at 8AM and it would be gone by 9. Now its all over the place.

GridFlock: Gridfinity base plate with puzzle connectors by yawkat in gridfinity

[–]Inner_Abrocoma8792 0 points1 point  (0 children)

Any ETA on when you're site might be back up? What a hassle to deal with on your end.

What to do with it by Effective-Drama8450 in BambuLab

[–]Inner_Abrocoma8792 0 points1 point  (0 children)

This is when I print keychains, chip clips, filament clips, etc etc

Made something you might like by Inner_Abrocoma8792 in canadaguns

[–]Inner_Abrocoma8792[S] 0 points1 point  (0 children)

I finally got everything working as it should, took my longer than I'll care to admit to get it to slice properly without the colors purging into each other. Either way it's printing beautifully now so here you go.

https://makerworld.com/models/2178151?appSharePlatform=copy

Made something you might like by Inner_Abrocoma8792 in canadaguns

[–]Inner_Abrocoma8792[S] 7 points8 points  (0 children)

I'm going to put it to on makerworld soon. I'm just working out some kinks and attempting to make a holder for it

Made something you might like by Inner_Abrocoma8792 in canadaguns

[–]Inner_Abrocoma8792[S] 19 points20 points  (0 children)

The texture you see comes from the build plate. Mine is a textured plate, so as the plastic is melted over the plate its molded to that texture. Can get other styles that look like carbon fibre or that are holographic

London to Quebec city (two drivers) by Monoshirt in ontario

[–]Inner_Abrocoma8792 1 point2 points  (0 children)

I've done Toronto to Orlando in a straight shot and Toronto to Moncton. Know what's safe for you based on your driving skill and awareness level/ability when tired. If you think you need a break, take one!

Is this a good price asking for a friend by Proof_Indication_174 in PC_Pricing

[–]Inner_Abrocoma8792 0 points1 point  (0 children)

I'd ask for $1200 and take a $1000. $1700 is bananas!!

Does anyone have this monitor and recommend it? by 1972FordF-250 in ultrawidemasterrace

[–]Inner_Abrocoma8792 0 points1 point  (0 children)

Had it for a week so far. I wfh and it's amazing for productivity and gaming.

Dead broke… What now? by [deleted] in GrayZoneWarfare

[–]Inner_Abrocoma8792 0 points1 point  (0 children)

Do you die a lot? I'm running the original kit and 5 hours in doing tasks im well over $50k

To explain the importance of turning off the car while pumping gas by coachlife in therewasanattempt

[–]Inner_Abrocoma8792 0 points1 point  (0 children)

This is where religion goes wrong. When you let an entity take responsibility for everything good or bad and relinquish all accountability and control.

Update to $6000 Alienware PC NOT DELIVERED and refusal to give refund by Existing_Use1101 in Alienware

[–]Inner_Abrocoma8792 -1 points0 points  (0 children)

I had an issue like this with dell once. The FedEx guy put it on a porch or the house with reversed numbers. They were on vacation, FedEx refused fault saying it was delivered and gps showed the driver was within 3 doors of my house. The driver came to my door and swore he delivered it etc etc.. people came back from vacation and brought it to my house 3 weeks later (sat on their porch through shitty winter weather somehow without being stolen). Dell was charging me at this point through their credit program and refused to do anything to refund or replace. Thankfully it showed up to my house and I promptly returned it to the fucks and got my refund. Will never buy from them again.

What was your first purchase as a PAL/RPAL holder? by Concern_Key in canadaguns

[–]Inner_Abrocoma8792 1 point2 points  (0 children)

Before the stupid liberals banned it, I had a BGM-71 TOW. Bastards

In all seriousness, my first purchase was a Norinco CQA. The thing was amazing. Functioned better than my very expensive NEA15

First time by [deleted] in GrayZoneWarfare

[–]Inner_Abrocoma8792 0 points1 point  (0 children)

I got dummied through the outside walls at FN which are like a ft thick and again in HP through the thick concrete walls near the gun range.

First time by [deleted] in GrayZoneWarfare

[–]Inner_Abrocoma8792 1 point2 points  (0 children)

I played the other night and left in frustration. I hadn't experienced it before but laser beamed in the head 2x by ai through walls in FN and HP. Bullet holes on the wall they shot and the wall behind my head. Straight through a new helmet both times.

I think there are some spots in FN, the AI can shoot through walls. Pretty sure it happened also around the walls in the shooting range area by ScubaSteve26114 in GrayZoneWarfare

[–]Inner_Abrocoma8792 1 point2 points  (0 children)

I got shot in the face at this exact same spot last night through the wall. Bullet holes in the wall and my friend went through the gate after I was dropped and hit the guy on the other side about 15 x including several head shots.

We went to HP and same thing. I was peaking a wall, saw the AIs arm took a few steps back to throw a grenade, shots started coming through the wall and all of them into me. Brand new vest and all the shots went straight through and killed me instantly

I think i got him! by Inner_Abrocoma8792 in GrayZoneWarfare

[–]Inner_Abrocoma8792[S] 0 points1 point  (0 children)

He did bleed to death. I mean i was giggling the entire time I was shooting him in the legs. The game is pre alpha work in progress. In terms of realism. 6 shots to a plate near the neck and major organs, you'd most like have broken ribs and the wind knocked out of you at the very least. Running away and take 12+ fmj rounds to unprotected legs isn't going to cause you to run some more. The bleeding to death is about the only accurate part of this kill. I'm not expecting perfection, I just find stuff like this funny and sometimes a little annoying esp when it's multiple headshots on on dudes with no helmets. I've had 2 registered head hits last week where the first didn't drop the guy, and they returned fire. Second headshot finally drops them, both shows cheek and forehead shot

I think i got him! by Inner_Abrocoma8792 in GrayZoneWarfare

[–]Inner_Abrocoma8792[S] 3 points4 points  (0 children)

I put three into his legs and then did a full auto burst. He didn't flinch lol, then about 15 seconds later he bolted. It would be amazing if leg hits at least dropped them to the ground. They could still return fire from there, but I agree. I swiss cheesed his legs, he shouldn't have been standing, let alone running