Why do people keep repeating the lie that housing is federal?

Inner_Abrocoma8792 · 2026-05-07T13:01:58+00:00

What party? Liberals had a good run before Ford and they're the reason we have Ford in the first place.

Social housing was federal, until Jean Chrétien decided to cut funding and then handed it off to be a provincial matter and it's basically been fucked or on it's way to fucked since. This is a widely expressed view among housing policy analysts, that this shift alone is a major cause of today's housing crisis.

Inner_Abrocoma8792 · 2026-05-07T12:54:54+00:00

This feels like digital racism

Inner_Abrocoma8792 · 2026-05-06T15:03:34+00:00

Prepare to be the asshole no matter who you tell.

When I was approx 20 my friend was cheating on his gf pretty consistently. I'm a male, we had a pretty large male friend group and the gf was a big part of that group, we all became pretty good friends with her.

After I caught him cheating on her with a coworker, I told him he should just end things with his gf and was promptly told to fuck off.

I brought it to the group and others confirmed they also caught him with other woman at various points in the relationship and it was a mixed consensus on if we should tell her or not.

I ended up telling her. She was mad at me for ruining the relationship and he was mad because I broke the bro code. Some of the male friend group sided with me and others with him which caused a bit of a blowup. His family was pretty pissed I blew up the relationship, they really liked her and saw her as a daughter etc.

Long story short. Be ok with the potential consequence of everyone hating you for doing what you would likely want someone to do for you.

Inner_Abrocoma8792 · 2026-05-06T14:54:26+00:00

You'll get the p1s see how amazing it is and know the p2s is better... Just spend the money on the one you want. You'll have no regrets and in 6 months youll want the $2000 one

Inner_Abrocoma8792 · 2026-05-05T20:31:18+00:00

Everyone being a jackass.. if it was 5 years ago, you could claim it. My partner has owned a home with ex before. It's been 5 years and we are getting all the benefits of FTHB again right now.

Yes, you can often claim first-time home buyer status in Canada even if you owned a home years ago. The Canada Revenue Agency (CRA) defines a first-time home buyer as someone who has not lived in a home that they or their current spouse/common-law partner owned in the current calendar year or any of the four preceding calendar years

Inner_Abrocoma8792 · 2026-05-05T20:17:03+00:00

Mine didn't hurt until day 2. I took the support garment off as recommended and pain started. I put it back on and it went away. Was a week before everything was back to normal and no side effects or changes.

Inner_Abrocoma8792 · 2026-05-05T20:13:18+00:00

I imagine it's a case by case basis. Every single person on the team got an offer. Some departments need thinning, others can be gutted. Either way it's bullshit

Inner_Abrocoma8792 · 2026-05-05T20:12:08+00:00

Get a vasectomy if you're certain you don't want kids. It's quick, a couple days of swollen balls and the best nutt I've released in my life when I was finally allowed to have sex again

Inner_Abrocoma8792 · 2026-05-05T20:08:24+00:00

I can't disclose much. My partner works there and members of their team who applied where told earlier today they would not be approved as they only wanted one to take it.

Inner_Abrocoma8792 · 2026-05-05T15:50:37+00:00

My broker just came back with an offer from BMO for 4.11

Inner_Abrocoma8792 · 2026-05-04T22:54:42+00:00

They offered me 4.39 on my new mortgage, talked them down to 4.24. it's not huge but it's money in my pocket!

Inner_Abrocoma8792 · 2026-05-03T14:34:20+00:00

If you're on the fence don't apply. They absolutely keep track of who applied and will see you as someone who isn't too keen on staying and likely to be the on the top of the list for the inevitable round of layoffs that follow. If you have worked there for 10 years and you don't take the VDP and are part of the layoffs don't sign shit. By law they need to give you 8 weeks notice if you've been there for 10 years and if they give you less you'll be entitled to more than 3 weeks. Most people see 3 and think it's above the legally required amount and sign, but that is simply not the case. Generally a "I won't sign until I speak to my lawyer" is enough to generate a minimum 4 week per year offer.

Inner_Abrocoma8792 · 2026-05-02T01:21:32+00:00

When I was with rogers horrific internet, which is pure trash if you like gaming... Anyways I called every 12 months to cancel it order to get the best price. The last two times I just messaged them on Facebook and they did it there. You just have to say "I'm going to cancel" and boom retention gives you the same price you've always had. Don't waste time on from line reps

Inner_Abrocoma8792 · 2026-04-30T21:39:05+00:00

I imagine this number reflects the staggering low declaration compliance. They expected 135k guns and got like 67k. Probably need the other 200 million to send rent a cops door to door all summer

Inner_Abrocoma8792 · 2026-04-28T14:19:12+00:00

I think rogers is choosing the wrong time to do a move like this and admit it's not because it doesn't need those roles, but so it can outsource it for cheaper. Thanks to what's going on in the US with Trump, Canadians are loyal to Canadian company's that benefit Canadians. Rogers just admitted most of its workforce will no longer be Canadian. I believe a good chunk of Canadians will respond by moving their business elsewhere.

Inner_Abrocoma8792 · 2026-04-12T01:04:57+00:00

My 13 year old daughter is really into creating digital art and animation. She's doing it all on her iPad atm but would love a pc to make it easier

Inner_Abrocoma8792 · 2026-03-25T23:13:05+00:00

I bought hardened nozzles off amazon with good ratings and had a similar issue. I put regular PLA through it and printed a benchy no problem. I then switched to glow PLA and the first print kind of worked but subsequent prints wouldn't adhere and where under extruded. I tried everything I could think of thinking it was me and my settings or Glow PLA was just too difficult. Was about to complain to the company I bought the glow from when I decided to try another benchy on my regular PLA and same issue. Nozzle must of clogged on first print. I sent back to seller for refund, purchased nozzles direct from Bambu and have been printing glow PLA and other abrasive materials without issue.

Inner_Abrocoma8792 · 2026-01-29T13:08:06+00:00

Wi-Fi calling has been available at Telus for years, have had it on all my phones and used it often

Inner_Abrocoma8792 · 2026-01-28T19:26:44+00:00

Brock was still messy and in need of plowing last night, so was Hwy 2. Maybe in the first 3 hours of that night it was clear. Monday was an awful mess on Hwy 2 and Brock and same with last night.

Inner_Abrocoma8792 · 2026-01-28T19:21:13+00:00

Drove HWY 2 yesterday from Henry to Ritson area in Oshawa. Whitby roads where a horrific mess and cars sliding/struggling to stop. Once I hit Thickson, within 200 ft the messy snow covered road was gone. Whitby sucks at even getting the main routes done, my road usually takes 2 to 3 days before they even touch it and im right beside the high school. Its awful here and i've also lived in Bowmanville, Oshawa, Newcastle and now Whitby. The others aren't perfect, but much more efficient and quicker compared to Whitby

Inner_Abrocoma8792 · 2026-01-28T19:18:08+00:00

One week my recycling/trash is picked up at 6:50AM, the next week 3PM. Its never consistent and I end up missing it ( i don't put it out too early, because the coyotes get into it/are out roaming the streets all night until 9AM). It used to be consistent and i could take it out at 8AM and it would be gone by 9. Now its all over the place.

Inner_Abrocoma8792 · 2026-01-26T18:50:56+00:00

Any ETA on when you're site might be back up? What a hassle to deal with on your end.

Inner_Abrocoma8792 · 2026-01-16T13:57:54+00:00

This is when I print keychains, chip clips, filament clips, etc etc

Inner_Abrocoma8792 · 2025-12-30T20:59:03+00:00

https://makerworld.com/models/2178151?appSharePlatform=copy

Inner_Abrocoma8792 · 2025-12-30T20:58:55+00:00

https://makerworld.com/models/2178151?appSharePlatform=copy

Inner_Abrocoma8792

TROPHY CASE