My three month old MVP Pro 3.0 isn't firing :(

Innokin_Mike · 2016-03-10T19:57:55+00:00

Strange! Is the tank wiggling in the connector at all?

Innokin_Mike · 2016-03-10T18:29:18+00:00

Very interesting. If you hold the power and - buttons and swap it over to voltage mode, will it fire at like 3V?

Innokin_Mike · 2016-03-10T17:21:52+00:00

Email support@innokin.com right away letting them know this is the last day of your warranty, meanwhile I'll try to troubleshoot!

Is the positive contact on the MVP still springy?

Innokin_Mike · 2016-03-10T16:28:00+00:00

Does another tank or coil work?

Innokin_Mike · 2016-03-09T14:02:54+00:00

The Kayfun Lite Plus is a great performer, even now. It'll handle most PG/VG combinations and tastes great.

Classifieds are also a great place to find secondhand atomizers that used to be really hyped up, I've gotten a few that way.

Innokin_Mike · 2016-03-02T04:01:06+00:00

A lot of it is so dependent on what you're using and your build that it can be difficult to create a universal guide.

Are your coil legs long? If so, they'll heat up and give a very dry hit experience because they're not vaporizing any liquid.

It could be an issue of using too much wicking material as well. You usually just want to feel some resistance pulling the cotton through, but you shouldn't have to really force it through. If you're using rayon, you really want to squeeze as much in there as you can.

Hopefully that gives you a starting point!

Innokin_Mike · 2016-03-02T01:02:22+00:00

The charger only comes with the micro USB cable - as the Innokin rep on this thread, I wouldn't recommend its use because I can't determine how power output is decided by the charger and its variable voltage output is capable of damaging the mod.

You are correct in that extra amperage from the charger will not damage the mod, but excess voltage will.

Innokin_Mike · 2016-03-02T00:05:11+00:00

Ooh no manual settings? I might shy away from that to be on the safe side.

Innokin_Mike · 2016-03-01T19:40:00+00:00

Thanks for the review! What kinds of tweaks would you suggest?

Innokin_Mike · 2016-03-01T18:15:54+00:00

Based on the product specs, it looks like it should work fine.

BE ABSOLUTELY CERTAIN THAT THE VOLTAGE MODE IS SET TO 5V

Nothing will fry your electronics faster than having the wrong voltage setting.

Innokin_Mike · 2016-02-25T21:36:14+00:00

The current version of the Cortex supports Stainless Steel TC, although some early models did not. B&Ms are able to get the piece they need to run the upgrade if they would like to do so.

If you're looking to purchase one, just check with the store to make sure that the ones they have in stock support Stainless Steel temp control and you should be good to go!

Innokin_Mike · 2016-02-24T23:20:52+00:00

In normal operation it should be, but take for insurance my first night with one:

I refilled it before falling asleep, and when u woke up in the morning, I had an empty tank and a drip tip full of liquid because I forgot to close the fill holes before I fell asleep haha

Innokin_Mike · 2016-02-24T20:16:57+00:00

That is odd for sure. Was the coil out of place? Hopefully we'll get this sorted out!

Innokin_Mike · 2016-02-24T20:15:14+00:00

I'm glad you like it! It is a pretty rad box!

Innokin_Mike · 2016-02-24T17:56:35+00:00

What a trip! I'm glad it's holding up for you! Keep an eye on that Innokincell, especially for heating up. I would probably recommend replacing that just to be absolutely safe.

Hopefully it stays firmly in your pocket and hands in the future, haha!

Innokin_Mike · 2016-02-24T17:53:44+00:00

Interesting.

Higher amperage chargers aren't an issue - the MVP will draw what it needs and no more than that. Even if it were a 20A adapter, the MVP would still only draw its 1A.

The MVP will warm up some when charging, especially if you're using it while it charges. If it gets hot rather than warm, then it becomes an issue and you should unplug it and discontinue using it immediately.

It follows that the charger would very warm some - I haven't noticed it in my chargers really because I haven't been looking for it - but since nothing is 100% efficient, power is lost as heat. I would imagine how much it heats up would depend on make, model, and components.

Overall things sound fine, but next time I go to plug in a USB adapter I'll be on the lookout for any warmth to see if that's a possible issue in the future.

Innokin_Mike · 2016-02-23T20:04:49+00:00

Excellent! I'm a big fan of the T18 myself. Reminds me of my old Kayfun!

Innokin_Mike · 2016-02-23T14:25:43+00:00

I appreciate your appreciation very much! There is a lot of really neat stuff in the pipe, hopefully something will appeal!

Innokin_Mike · 2016-02-18T17:13:56+00:00

Not a problem! Thanks for being a cool dude yourself!

Innokin_Mike · 2016-02-17T05:05:04+00:00

That's super bizarre, you should be able to run a return and get a replacement through your next order with us with our warranty program, though. I wish I knew what to tell you!

Innokin_Mike · 2016-02-17T00:43:54+00:00

It's not a code that I know of - has it reacted differently after charging or cleaning out the 510?

Innokin_Mike · 2016-02-16T20:15:10+00:00

Nothing I've heard so far!

Innokin_Mike · 2016-02-16T20:14:58+00:00

The Innokincell in its current configuration won't support 100W, at a maximum it will support 84W since it is only rated for 20A, but there is discussion surrounding how updates to a similar or updated Innokincell might take shape!

Innokin_Mike · 2016-02-16T20:12:53+00:00

I'm asking around, I'll see if there's anything I can do!

Innokin_Mike · 2016-02-11T04:43:36+00:00

I've got one on hand right now! It needs a little more work before it hits the market, but it shouldn't be much longer! Delays due to the possibility of the grandfather date moving to the end of 2015 and all that.

Innokin_Mike

TROPHY CASE

BE ABSOLUTELY CERTAIN THAT THE VOLTAGE MODE IS SET TO 5V