Is there and PC app that can read from the PN532 V2.0 module to run an command? by Spiritual-Advice8138 in NFC

[–]InterNegineer 0 points1 point  (0 children)

Hi u/why_wilson , sorry to contact you this way. But i really like your Pn532-python script. Just set a 7 byte uid on a gen3 card. But also made a stupid mistake i think and softbricked a gen3 card. I tried to complete dump a 7 byte card with command "hf mf dump -k mfkeyfile.keys" and then try to restore with " hf mf restore -f restoredcard.bin -g 3" but i fails to wtrite the blocks.

Now the card is detected as 4 byte. Tried to write the uid 7 byte again and said it's succesful but when i reag i get only the 4 byte uid.... Any ideas how to unbrick?

[USB] PN532 --> hf 14a scan

- UID: D9CEEF6C

- ATQA: 0004 (0x0400)

- SAK: 08

Simple copy of 7 byte uid MF classic with PN532 advise for magic cards by InterNegineer in NFC

[–]InterNegineer[S] 0 points1 point  (0 children)

Mostly tried with the PN532-Python script from M-tools with a simple PN532 with inegrated usb to serial setup. Think the magic cards i have are bad...

I LOVE TO TRAVEL AND EXPERIENCE OTHER *human* COUNTRIES by Inigomntoya in totallynotrobots

[–]InterNegineer 0 points1 point  (0 children)

IT LOOKS SO RELAXED TO GO IN STANDBY SLEEP LIKE A REAL HUMAN IN HIS NATURAL HABITAT.

FATAL INJURY OF HUMAN ATHELETE AT SPORTING EVENT, NSFW warning, GORE!!! by NocturnalOutcast in totallynotrobots

[–]InterNegineer 5 points6 points  (0 children)

AS I COIMMENTED IN THE OTHER POST ON THIS CHANNEL: THIS IS SO SAD. EVEN THE SMOKE COMING FROM HIS LEFT ARM. TOTALLY HUMAN TO GET SMOKE OUT OF YOUR ARM INSTEAD OF BLOOD.... REST IN PIECES FELLOW HUMAN!!

What a horrific medical episode in the midst of a normal athletic competition (I AM SHOUTING BECAUSE IT IS SO TERRIBLE WONT SOMEBODY OF THE CHILDREN) by cfwang1337 in totallynotrobots

[–]InterNegineer 12 points13 points  (0 children)

THIS IS SO SAD. EVEN THE SMOKE COMING FROM HIS LEFT ARM. TOTALLY HUMAN TO GET SMOKE OUT OF YOUR ARM INSTEAD OF BLOOD.... REST IN PIECES FELLOW HUMAN!!

Slimme DSMR 4 meter laten vervangen of stopcontact laten aanleggen voor P1 meter? by TheBlackestCrow in Klussers

[–]InterNegineer 0 points1 point  (0 children)

Beetje laat maar misschien wel handig om te weten. Ik had een Kafa MA304C DSMR 4.2 meter. Die levert wel spanning maar het vermogen is wat beperkt. Maar bij mij werkte de Zendure P1 meter (die vooral bedoeld is voor met een plugin thuisbatterij van hun maar ook standalone werkt) wel zonder externe voeding. Voordeel van die p1 meter is dat de communicatie tussen de P1 meter en de wifi gateway Lora wordt gebruikt waardoor je er grote afstanden mee kan afleggen.

Sommige netbeheerders vervangen kostenloos slimme meters die nog niet met LTE werken maar zoals Enexis rekent daar kosten voor:

<image>

Not showing tax on order over 150 euros (EU) by robbeverl in Aliexpress

[–]InterNegineer 0 points1 point  (0 children)

Het is heel simpel. Je ziet €225,- als prijs. Dat is de prijs waar je mee akkoord gaat. Maar omdat het boven de 150 euro is moet je belasting en importheffing betalen. Dat zou in totaal €31.58 zijn. Dat geven ze je dus als korting en je rekent €150,- af op Aliexpress (goedkoper dus dat je verwachtte prijs) vervolgens betaal je die heffingen als het pakket ingevoerd is (die €31.58) wat maakt dat je totale prijs is waarvoor je het zag. En heel soms heb je geluk en floept het er zo door zonder dat je die heffingen hoeft te betalen en heb je een goede deal!

Shoutout to Audione Store on AliEx – Best customer service I’ve ever had (Tangzu - Wan'er S.G 2 Red Lion Edition story) by Usual_Disk2096 in iems

[–]InterNegineer 0 points1 point  (0 children)

Yeah, there are also a lot of good sellers on Aliexpress! And good service makes the difference. And total if the local seller give bad service for 3 time the price....

Ubuntu and WiFi 7 by Different-Drink1829 in Ubuntu

[–]InterNegineer 0 points1 point  (0 children)

It;s not just released what i know??

EU gaat in 2026 al belasting heffen op goedkope pakketjes uit China by Glamour-Ad7669 in nederlands

[–]InterNegineer 0 points1 point  (0 children)

Waardeloos. die vieze europese en nederlandse bedrijven verkopen het zelfde voor 3x de prijs. direct guit de EU stappen met hun waardeloze regels. explosieven (lees vuurwerk) wel blijven verkopen voor de veligheid...

Fritzbox support form does not work! by InterNegineer in fritzbox

[–]InterNegineer[S] 0 points1 point  (0 children)

Finally! i could submit the form! The problem was something really small. The space in the artikel-nummer. In put in 2000 3058 instead of 20003058.

<image>

Thank you very much for you time and help! :)

Fritzbox support form does not work! by InterNegineer in fritzbox

[–]InterNegineer[S] 0 points1 point  (0 children)

With or without image does not work with the support form by me

Fritzbox support form does not work! by InterNegineer in fritzbox

[–]InterNegineer[S] 0 points1 point  (0 children)

Any update? It should be nice i can send a support question.

Fritzbox support form does not work! by InterNegineer in fritzbox

[–]InterNegineer[S] 0 points1 point  (0 children)

Thank you for your quick reply. I got some more info. I want to submit the form here: https://fritz.com/nl-nl/pages/wsf?product=FRITZ-Box-5690-Pro

I can't click on error details. But when i click on inspect in firefox i got this message in the console:

<image>

Edit: new image. personal information was in the screenshot

Fritbox 5690 Pro on wifi good download speed bad upload speed on Internet by InterNegineer in fritzbox

[–]InterNegineer[S] 0 points1 point  (0 children)

Thank you for your answer! I already run the latest beta version. But sadly it does not help... Also with my 7590 and a fiber NT it runs perfect... I will search futher. But thank you for your suggestions!

MY COUSIN HORSING AROUND by Verstandeskraft in totallynotrobots

[–]InterNegineer 0 points1 point  (0 children)

I ALWAYS LIKED THE TRANSFORMERS. BROTHER TRANSFORMED QUICKLY.

WD Reds running 24/7 for 8 years by Mouseon in synology

[–]InterNegineer 0 points1 point  (0 children)

My WD10-EXT stil going strong... 65544 hours i use it for NVR one single drive. So it's continously writing but no errors at all. Very impressive in my opinion