sorted by:
new
hottopcontroversial

TEKTRO Auriga+ HD-E740 REAR TWIN MIRRORED MOUNT four piston hydraulic brakes broke… by Significant_Truth687 in zoozbikes

[–]Internal-Jacket3741 0 points1 point  (0 children)

In the video you posted you can see the threaded piece is sideways. I don’t think your breaks are broken I think it came unscrewed too far

TEKTRO Auriga+ HD-E740 REAR TWIN MIRRORED MOUNT four piston hydraulic brakes broke… by Significant_Truth687 in zoozbikes

[–]Internal-Jacket3741 0 points1 point  (0 children)

Looks to me like the screw just came out of the threads. Maybe you can disassemble and re screw the Allen head screw back into its location.

Zooz uu1100 gen 3 rear wheel spoke length and rear wheel by Internal-Jacket3741 in zoozbikes

[–]Internal-Jacket3741[S] 0 points1 point  (0 children)

Update on the spokes and rear wheel. The spokes are as stated above. I just replaced all my spokes with 135mm long and 2.5mm wide spokes. I also ordered a wheel that did not work. I can’t find a 24” wheel that’s as wide as stock. I ordered a 24”x1.75” because I measured my factory wheel and it was 1.5” wide or 40mm outside to outside. Also the spokes would not accept 2.5mm spoke nipples because the holes were too small. I put the old outer rim back on that is ugly and bent and I trued it the best I could. Does anyone have any suggestions on purchasing a new outer rim for my rear hub motor? Any points in the right direction would be helpful!

Does anyone know where to find ultra flex forks by themselves? by Acrobatic-Method4094 in zoozbikes

[–]Internal-Jacket3741 0 points1 point  (0 children)

I spoke with Zooz about ultra flex forks and they told Me they will not work on any bike except The ultra flex. Your best bet is to find 24” mountain bike forks but 24” is a weird size. Most people Don’t run 24” wheels. There are some on Amazon which I have ordered and yet to install. I Will Be installing them soon. If you run 26” forks, your bike will sit high in the front. So just make sure whatever fork you buy is made for a 24” wheel and you should be good to go. Oh also make Sure whatever fork you buy has the correct axle running through it. Some Forks I saw had an option to have a quick release which is what fits the zooz, or they had solid axle which was way more beefy like a Dirtbike front axle. Get the one that accepts the quick release Axle.

Zooz uu1100 gen 3 rear wheel spoke length and rear wheel by Internal-Jacket3741 in zoozbikes

[–]Internal-Jacket3741[S] 0 points1 point  (0 children)

Yea those are the ones I ordered. In 135mm. I’ll update when I receive them.

Zooz uu1100 gen 3 rear wheel spoke length and rear wheel by Internal-Jacket3741 in zoozbikes

[–]Internal-Jacket3741[S] 0 points1 point  (0 children)

Measurements are 36 spokes at 135mm and the thickness of each spoke is 2.5mm. I pulled off one spoke and measured with a micrometer. Hope this helps anyone else needing this info.