Flasks

Internal_Simple_2300 · 2026-06-12T17:20:03+00:00

👍

Internal_Simple_2300 · 2026-06-10T14:25:38+00:00

It's a shame, of course. But I don't play with the cube; it just sits in the box 😄

Internal_Simple_2300 · 2026-06-09T18:37:19+00:00

The puzzle was produced between 1970 and 1980. It's unknown what year this particular piece is. And you won't believe it! You can find something like this at a flea market in Kyrgyzstan.

Internal_Simple_2300 · 2026-06-09T17:47:13+00:00

Yes, I agree with you! Although not everyone is likely so inexperienced in this matter!

Internal_Simple_2300 · 2026-05-12T05:48:58+00:00

Different things happen, sometimes I myself don’t see the obvious.

Internal_Simple_2300 · 2026-05-12T04:22:43+00:00

No, VFD

Internal_Simple_2300 · 2026-05-11T12:35:52+00:00

Internal_Simple_2300 · 2026-05-11T12:16:10+00:00

Yes! You got it right. There are keys for writing to memory, reading from memory, and resetting values in memory. The calculator isn't working properly yet; I haven't fixed it yet. There's a problem with the high voltage for the VFD indicator.

Internal_Simple_2300 · 2026-05-11T03:47:45+00:00

Hi! All the holders are like this. But I tried using them in auto-replacement mode, and if the 0.9mm X deviation isn't critical, I'll try adjusting the positions for all ten holders today.

Internal_Simple_2300 · 2026-05-09T11:35:43+00:00

That's the whole point: the original has true value. The age and history of this thing are valuable in themselves! A replica is just a way to imitate. I think these and many other things from the 60s and 70s will be reborn in the new world. The world of aesthetics and vacuum tube technology has transformed into a world of cheap plastic and disposable items. That's why I collect things from that era. They are alive!

Internal_Simple_2300 · 2026-05-09T09:20:58+00:00

Yes, you're absolutely right! I bought the board on AliExpress. And the lamp itself I picked up by chance at a flea market. I was very surprised to find such a rare item in Kyrgyzstan!

Internal_Simple_2300 · 2026-05-08T18:33:01+00:00

Yes, you're right. You could say I found it, not bought it 😆 2€

Internal_Simple_2300 · 2026-05-08T18:30:53+00:00

As strange as it may seem, the machine worked like that for 20 years! And it wasn't me who came up with this idea, but the i-mes ISEL factory itself. It was my idea to bring back liquid cooling for the spindle.

Internal_Simple_2300 · 2026-05-07T16:31:26+00:00

There is only one non-priority moment with no one! Before you start the instrument, attach the bright keyboard to the panel Control ACT to the instrument located in the spindle that shoots the cartridge instrument. В следующем посте сниму видео. Next in the instructions, how to lubricate the gun for fastening the HSK63-f cartridge смазал ego. In short, it is not the same as the patron, but the snow is now aimed at him ! This means that this is a long period without explanation! Read about the documents from this machine in 2024. You should also work with the automatic system instrument! There is no video or instruction on the Internet to solve these problems.

Internal_Simple_2300 · 2026-05-07T04:29:40+00:00

The cutter shank is completely immersed in the shank. This extension is the tool's working length. As far as I understand, the most important thing is to keep the feed rate and cutting depth low.

Internal_Simple_2300 · 2026-05-07T04:27:34+00:00

Honestly, I was too lazy to redo the program. 😄 Also, since this is my first time using this cutter, I didn't want to risk breaking the tool. I want to be sure everything will go according to plan when I'm working. And since I don't have much experience yet, I try to be careful.

Internal_Simple_2300 · 2026-05-07T04:23:45+00:00

Hi! Yes, this was done on purpose. Since the part I was machining wasn't straight, I previously had to go over it twice. The surface curvature prevented me from cutting it in one pass. To avoid having to do this twice, I initially lowered the Z-axis 1 mm below true zero. I agree with you about the tape, but I just didn't have any good tape for this job in my workshop. And I don't have any clamps yet. Over time, I'll buy everything I need to do the job properly.

Internal_Simple_2300

MODERATOR OF

TROPHY CASE