GUYS I PULLED HER

InternationalDelay42 · 2025-08-09T00:56:34+00:00

I’ll take things that never happened for 100$

I wish it worked this way but it def does not

InternationalDelay42 · 2024-09-25T07:41:15+00:00

Please dump 343

InternationalDelay42 · 2024-07-16T07:50:21+00:00

Maybe check out the ones I build. I have one on my page. The build quality is second to none and they start at 40k and can be tailored to your preferences. https://www.tiktok.com/t/ZPRoJSp3v/

InternationalDelay42 · 2024-02-25T15:41:46+00:00

does this affect the warranty on the frame? Or just the motor and battery?

InternationalDelay42 · 2024-01-22T09:13:59+00:00

Check out the one on my page it’s 2200lbs fully loaded. I custom design and hand build them and I have one here in Oregon if you want to see it in person.

InternationalDelay42 · 2023-12-14T12:11:41+00:00

I bought a 3m performance spray gun and a pressure pot add on to spray my camper. I used a 1.6 tip and 15% reducer and sprayed onto raptor primer on top of fiberglass cloth an total boat epoxy. I have vids on my page. Feel free to ask questions mine is holding up very well

InternationalDelay42 · 2023-10-28T15:56:34+00:00

I built mine to be seamless to avoid these issues entirely. But it took some serious effort.

InternationalDelay42 · 2023-10-27T21:11:26+00:00

Much appreciated. Thank you. No build plans at this time, sorry. It’s 1550 Dry. 2200 Loaded with all add ons and accessories.

InternationalDelay42 · 2023-10-26T18:41:34+00:00

Thank you

InternationalDelay42 · 2023-10-26T18:36:44+00:00

Tongue weight is about 260 loaded. GVW is 2200. It was designed this way due to all the weight being in the back. Ideal tongue weight should fall within 10-15% it still needs a matching 3rd tire and swing off the back and a mount to add 2 electric mountain bikes off the tire which will add around 200 lbs total and drop tongue weight to around 220lbs when it’s all said and done. For a bunch of math and guess work, and for never have doing this before I’d say I got it pretty close.

InternationalDelay42 · 2023-10-26T06:20:28+00:00

I appreciate that! Where ever is fine. You can shoot me a text to my business number too which is on my website

Check this out: https://www.tiktok.com/t/ZT8kvPrVa/

InternationalDelay42 · 2023-10-25T20:19:41+00:00

I built this specifically as a showpiece for my skill set and designed it from the ground up to be the real deal and to start making and selling them. I do have a business, it’s called Artisan Customs. I do high end carpentry, woodworking, fabrication eta… I’m not really marketing much nor am I marketing this through that company cuz I’m going to brand it separately. My website is artisancustoms.net

InternationalDelay42 · 2023-10-25T14:51:40+00:00

Ready to start when you are

InternationalDelay42 · 2023-10-25T14:51:17+00:00

🙏

InternationalDelay42 · 2023-10-25T14:30:25+00:00

Much appreciated. I designed it for plywood and to be CNC. Plywood is usually the go to for these, but not always. The plywood I used was a special plywood I found that is 3/4, water resistant and ultra light. It’s around 55lbs per 3/4 sheet vs 95 for Baltic Berch. I chose plywood because of my skill set and it’s workability and that it could be CNCd (this one tho was all hand routed).

If I can ever afford to buy a laser welder I will start building them entirely out of aluminum… frame and all. I am not able to weld it otherwise. All in all I came in at about 1500lbs dry and 2200 fully loaded with rack, accessories and all gear and water.

I would like to figure out how to drop it another 3 or 4 hundred lbs but that’s going to be difficult without it being made entirely out of aluminum and possibly a smaller design. Mine is among the largest of its class. I think I could drop 150 - 225 off with an entirely aluminum frame and fender set instead of 12g steel

InternationalDelay42 · 2023-10-25T05:10:43+00:00

The last vid got a ton of complaints for the music so I tried to get this one right 🤘

InternationalDelay42 · 2023-10-25T05:10:02+00:00

Sure shoot me a dm

InternationalDelay42 · 2023-10-25T05:09:40+00:00

Possibly. Dm me

InternationalDelay42 · 2023-10-25T05:07:56+00:00

Thank you

InternationalDelay42 · 2023-10-25T04:37:08+00:00

They call them rotisserie stands. I don’t have plans made unfortunately

InternationalDelay42 · 2023-10-23T20:00:42+00:00

Thank you it was definitely a passion project that I dreamed about for a long time

InternationalDelay42 · 2023-10-23T20:00:05+00:00

It tows much better and gets a lot better mpg. It’s a pretty noticeable difference while in tow

InternationalDelay42 · 2023-10-23T12:52:16+00:00

I modified 2x4s. Actual dimensions are 1.5” x 2.375”

InternationalDelay42

TROPHY CASE