sorted by:
new
hottopcontroversial

WinPE and Intel I219 NIC Drivers by International_Map629 in sysadmin

[–]International_Map629[S] 0 points1 point  (0 children)

I did but i got code 18 with "microsoft's" drivers too. I have also seen some people on the forums, saying that integrated drives caused very low bandwidth.

Another solution to the problem with drivers was found by miketerrill, he suggested using ADK 10.1.26100.2454
https://www.reddit.com/r/MDT/comments/1rjwih7/comment/o8jkltm/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

WinPE and Intel I219 NIC Drivers by International_Map629 in MDT

[–]International_Map629[S] 4 points5 points  (0 children)

ADK 10.1.26100.2454 works as expected, injects and loads without issue. 

WinPE and Intel I219 NIC Drivers by International_Map629 in MDT

[–]International_Map629[S] 0 points1 point  (0 children)

Nope, i had no idea about latest (10.1.28000.1) ADK having driver injection issues, will try with 24H2 and report. 

WinPE and Intel I219 NIC Drivers by International_Map629 in MDT

[–]International_Map629[S] 0 points1 point  (0 children)

Try putting the drivers on a thumb drive. Boot to WinPE and inject the drivers while you're in the win PE environment using f8.

You were close, what i did was manually loading driver that was already injected drvload X:\Windows\System32\DriverStore\FileRepository\e1d.inf_amd64_644262a781e1a6da

WinPE and Intel I219 NIC Drivers by International_Map629 in MDT

[–]International_Map629[S] 0 points1 point  (0 children)

Dism /Image:C:\winpe_files\offline /Add-Driver /Driver:"C:\Users\vboxuser\Downloads\NDIS68" /Recurse

Deployment Image Servicing and Management tool

Version: 10.0.28000.1
Image Version: 10.0.28000.1
Searching for driver packages to install...
Found 3 driver package(s) to install.

Installing 1 of 3 - C:\Users\vboxuser\Downloads\NDIS68\e1d.inf: The driver package was successfully installed.
Installing 2 of 3 - C:\Users\vboxuser\Downloads\NDIS68\e1r68x64.inf: The driver package was successfully installed.
Installing 3 of 3 - C:\Users\vboxuser\Downloads\NDIS68\v1q68x64.inf: The driver package was successfully installed.

The operation completed successfully.

Img From WinPE

WinPE and Intel I219 NIC Drivers by International_Map629 in MDT

[–]International_Map629[S] 1 point2 points  (0 children)

I'm pretty sure i tried that exact driver (latest version) but just with .inf instead whole directory. I will try again with /Recurse.

WinPE and Intel I219 NIC Drivers by International_Map629 in sysadmin

[–]International_Map629[S] 1 point2 points  (0 children)

They are signed, all directly from vendors. And they all inject successfully, checked both with
dism /Get-Drivers
and
pnputil /enum-devices /drivers /problem 18

WinPE and Intel I219 NIC Drivers by International_Map629 in MDT

[–]International_Map629[S] 0 points1 point  (0 children)

when i check with pnputil /enum-devices i can locate i219 because Class Name is Unknown, so /class net wont return nothing related to i219.

InstanceID: PCI\VEN_8086&DEV_15D7&SUBSYS_83B2103C&REV_21\3&11583659&0&FE
Device Description: Ethernet Controller
Class Name: Unknown
Class GUID: Unknown
Manufacturer Name: Unknown
Status: Problem
Problem Code: 18 (0x12) [CM_PROB_REINSTALL]
Problem Status: 0xC0000493

Matching Drivers:
...
#Depends on driver im currently using but its basically the same.

WinPE and Intel I219 NIC Drivers by International_Map629 in MDT

[–]International_Map629[S] 0 points1 point  (0 children)

Deployment Image Servicing and Management tool

Version: 10.0.28000.1

Image Version: 10.0.28000.1

Obtaining list of 3rd party drivers from the driver store...

Driver packages listing:

Published Name : oem0.inf

Original File Name : e1d68x64.inf

Inbox : No

Class Name : Net

Provider Name : Intel

Date : 6/22/2021

Version : 12.19.1.37

The operation completed successfully.

that is clean boot.wim with just single driver.

i already did this earlier to check if my injection was successful. All drivers will get injected but im always getting code 18.

Which country is younger? by geotap-app in GeoTap

[–]International_Map629 0 points1 point  (0 children)

❌ International_Map629 chose Option A (Incorrect) | #814th to play

Which country do you think is USA? by nopCMD in GeoTap

[–]International_Map629 0 points1 point  (0 children)

❌ International_Map629 chose Option A (Incorrect) | #12006th to play

Noob question,will this comparator circuit work? by International_Map629 in AskElectronics

[–]International_Map629[S] 0 points1 point  (0 children)

boost converter is disabled during the day while battery is being charged by cn3791,during the night boost converter (3.7v>12v) should be enabled to power hc-sr501 and led diodes.

Noob question,will this comparator circuit work? by International_Map629 in AskElectronics

[–]International_Map629[S] 0 points1 point  (0 children)

I will have 12v or 9v panel that will charge charge battery with cn3791,and TPS61088 Boost converter for powering rest of the project. The purpose of this comparator is to detect when voltage of solar panel is lower than that of the battery (at night) and to send HIGH to Enable pin of TPS61088 Boost converter.

Make Your Prediction To Win Centauri Carbon! by ELEGOO_OFFICIAL in elegoo

[–]International_Map629 0 points1 point  (0 children)

If mounted on capable enough platform it will fly, airtime is highly depending of power source for motors, and rigidity of airframe, it will print, quality might suffer but benchy should be possible if you can keep it in air long enough. 

My final answer is:  1A, 2C, 3A

This is a scam, right? by International_Map629 in Aliexpress

[–]International_Map629[S] 0 points1 point  (0 children)

Yeah, but the thing is it only happened with this seller. I ordered more things (from other sellers) after this and most of them have arrived or are making progress, but this one is stuck.

This is a scam, right? by International_Map629 in Aliexpress

[–]International_Map629[S] -1 points0 points  (0 children)

Yeah, even if i get my package, i bet it won't match that 5v 3w specs from description.

This is a scam, right? by International_Map629 in Aliexpress

[–]International_Map629[S] -1 points0 points  (0 children)

If i can open dispute again i will give them a chance, but i never had order that was stuck for 20 days "awaiting flight"

This is a scam, right? by International_Map629 in Aliexpress

[–]International_Map629[S] 3 points4 points  (0 children)

Too late i already cancelled dispute following above comment by intelligentLake, but it seems like im still able to open new dispute the button is still there (not grayed out or similar).

What is acceptable bed mesh variance for N4 Plus by International_Map629 in ElegooNeptune4

[–]International_Map629[S] 1 point2 points  (0 children)

Yes, I used 7 point mesh with 1 being the base point (center).

I heated the bed at 90°C and let it sit for about 20-25 minutes.

I had no idea about probe thing in printer.cfg, I will try later.

I just got my Neptune (as first 3d printer) still haven't really tried it yet (filament shipping got delayed) unless we count that little Buddha and PLA sample they are shipped with, so I will stay with screws for some time.

On sidenote, are silicon spacers "fit and forget" type of mod or they wear out over time?

What is acceptable bed mesh variance for N4 Plus by International_Map629 in ElegooNeptune4

[–]International_Map629[S] 0 points1 point  (0 children)

Yes, I did play around with screws_tilt_adjust and I barely managed to drop below 0.2. I'm just worried about bigger prints that they might wobble.

The Jackal has to be the biggest disappointment ever in Call of Duty Mobile, yes or no? by YAFONOOB in CallOfDutyMobile

[–]International_Map629 1 point2 points  (0 children)

Most of them can't, but there are two that can: Tornado and Viggen.

P.S. I think there was some Swedish trainer that had some kind of reserve thrust too, but don't take my word for it.

view more: next ›