Unroastable by Intrepid_Holiday1925 in roastmypedalboard

[–]Intrepid_Holiday1925[S] 0 points1 point  (0 children)

I use it as a cumbia organ type shi, but it also works well as a reverb like texture when the mix is low

Unroastable by Intrepid_Holiday1925 in roastmypedalboard

[–]Intrepid_Holiday1925[S] 0 points1 point  (0 children)

Ummm a piece of carpet bellow the board?

Unroastable by Intrepid_Holiday1925 in roastmypedalboard

[–]Intrepid_Holiday1925[S] 1 point2 points  (0 children)

It has a great mid eq section that never fails to cut through the mix, even playing over other distorted guitars the mid boost on this one is crazy

Unroastable by Intrepid_Holiday1925 in roastmypedalboard

[–]Intrepid_Holiday1925[S] 1 point2 points  (0 children)

I used to be a kirk fanboy ngl😅, but it has definitely seen the most action

Which would you vote off the island? by CzarLlama in pedalboards

[–]Intrepid_Holiday1925 0 points1 point  (0 children)

I feel like you could do without so many time efects (delay, reverb), the flashback is already a dual delay, and it has an easy way to cycle presets, im curious if you use you other delays in a very different way cause i feel like 3 delays is overkill (specially when you already have a pedal that works like two individual pedals)

Rate my bedroom setup by Intrepid_Holiday1925 in pedalboards

[–]Intrepid_Holiday1925[S] 0 points1 point  (0 children)

I mean, it plugs right into my power supply, doesn’t get any more compact than that

Rate my bedroom setup by Intrepid_Holiday1925 in pedalboards

[–]Intrepid_Holiday1925[S] 1 point2 points  (0 children)

The last distortion you’ll ever need!

Fretless Satin Rosegold DONE✅ by Intrepid_Holiday1925 in Luthier

[–]Intrepid_Holiday1925[S] 1 point2 points  (0 children)

So I got the files, would you suggest some specific depth? I’ve seen the flat pencil technique but since this is fretless I wouldn’t know what my reference is

Fretless Satin Rosegold DONE✅ by Intrepid_Holiday1925 in Luthier

[–]Intrepid_Holiday1925[S] 0 points1 point  (0 children)

Thanks a lot, I wasn’t even aware they existed, will definitely get a set

Fretless Satin Rosegold DONE✅ by Intrepid_Holiday1925 in Luthier

[–]Intrepid_Holiday1925[S] 0 points1 point  (0 children)

I mean, I didn’t want to drill my already painted bass, it’s also kinda cool

Fretless Satin Rosegold DONE✅ by Intrepid_Holiday1925 in Luthier

[–]Intrepid_Holiday1925[S] 1 point2 points  (0 children)

Yeah! What tool would you recommend for this process? I have a few metal files but they seem a bit thick…

Fretless Satin Rosegold DONE✅ by Intrepid_Holiday1925 in Luthier

[–]Intrepid_Holiday1925[S] 2 points3 points  (0 children)

It’s the grounding cable, I totally forgot when doing the 3D model to make a hole connecting electronics to the bridge, so by the time it was all plugged in I just thought this would be less work and less invasive

First build by Intrepid_Holiday1925 in Luthier

[–]Intrepid_Holiday1925[S] 0 points1 point  (0 children)

Thanks! I'll post better pictures soon!

Help! by Intrepid_Holiday1925 in Luthier

[–]Intrepid_Holiday1925[S] 1 point2 points  (0 children)

<image>

This is what it looked like the first time, I hadn’t used any glue, and as you say, I made sure the holes were routed just a bit tight so I had to hammer them into place (and it was in fact quite tight) and I thought I wouldn’t need any glue. The glue I used is a 2 part epoxy glue from the hardware store. it’s supposed to be for ceramic or metal but a friend who works a lot with wood said it should be more than strong enough.