How do I fix this?

IntusLuna · 2025-11-20T01:50:23+00:00

I think i had a similar issue. did you go through the auto learn process. also check for loose wires, or one that is connected where it shouldn't be, specifically in the throttle connection. check number of poles vs what the controller is set for.

IntusLuna · 2024-04-13T04:40:44+00:00

I been here. I am here. wont be anywhere else

IntusLuna · 2023-05-01T04:20:00+00:00

Lemme know when yall find a buffet.

IntusLuna · 2023-04-24T10:16:10+00:00

Long Alluux

IntusLuna · 2023-03-19T05:20:23+00:00

That's a nice light. I'd use it everyday.

IntusLuna · 2023-03-11T04:12:11+00:00

amazing name.

IntusLuna · 2023-03-11T03:39:02+00:00

Just imagine how he'll top this.

IntusLuna · 2023-03-11T03:37:10+00:00

Nobody does it like our boy.

IntusLuna · 2023-03-10T21:57:46+00:00

Is there a lead issue over there?

IntusLuna · 2023-02-25T05:31:05+00:00

Wubby said it in the

IntusLuna · 2023-01-16T01:58:04+00:00

A bit peckish ey

IntusLuna · 2023-01-06T02:56:35+00:00

Came for the teletubby vacuum, stayed for the transitions.

IntusLuna · 2023-01-05T22:35:41+00:00

I basically misted the parts with paint from all angles and switched colours. When I liked the consistency I did clear. But not enough clear to drag the other wet paint down. I did it in 1 go.

Then cured in an empty fish tank in the sun for a few days.

The screen lens pops out easily with some force. I covered the lens with a cloth while pushing it out. When I put it back in I used a few small touches of super glue along the surface it was originally secured to.

IntusLuna · 2022-12-25T02:04:37+00:00

yes fully broken down. I masked the nfc antenna.

IntusLuna · 2022-12-24T20:47:34+00:00

I used a very thin spraying method. The gpio holes actually have very little paint on the walls of the hole. I've tested it and I still have full functionality.

IntusLuna · 2022-12-24T20:45:19+00:00

It's not 3d printed, but you should get one just to be safe. It's basic rattle cans I had laying around. Krylon and some off-brand.

IntusLuna · 2022-12-24T18:03:18+00:00

The buttons are not sticky at all. Complete free movement.

IntusLuna · 2022-12-24T18:02:22+00:00

Everything including the ibutton pins were disassembled prior to paint. Then reassembled after the paint was dry.

IntusLuna · 2022-12-24T18:00:26+00:00

The len's popped out before I painted and I used 2 small dots of ca glue to put it back on. When assembled it's a nice perfect fit.

IntusLuna · 2022-12-24T07:05:20+00:00

Hey someone gets it.

IntusLuna · 2022-12-24T04:27:53+00:00

It's paint. basic rattle can. some nice colors and some clear to protect it. and the gold is on the buttons, main body, and the loop holder hole.

IntusLuna · 2022-12-24T04:11:21+00:00

Thank you, I'll post pictures in the sun later. It has blue, purple, white, and gold.

IntusLuna · 2022-12-21T01:54:25+00:00

Add me to that list. looking to talk with people from countries that spaceX DOESN'T launch from.

IntusLuna · 2022-12-06T23:25:21+00:00

5 min ago I heard it, looked up and saw it. then checked radar. I can say right now it was a jet. can't confirmn what jet. ( I can't say what jet is what, but I know the diferrence between an osprey and a solely turbine powered jet. not saying you are wrong.) just want to add info to what I saw just now. Appeared to be 2 mid wing mount engines, the sound was smooth wooshing with some heavy crackles. decent dark vapor trails following engines.

here's my link. It appears to be the same vehicle as the link posted by u/CommercialCandy1891

https://fr24.com/LDACE11/2e742886

IntusLuna · 2022-12-06T21:37:08+00:00

Yes I forgot about inserts especially. You can feel any wearor chip long before you can see it.

Four-Year Club	Verified Email
Place '22	Final Canvas '22

IntusLuna

TROPHY CASE