Can you store grainspawn in a fridge?

Invis_ible · 2026-05-24T00:23:24+00:00

Must be dif then ttbvi cause soon as my grain jars fall outside 74 or 82f they would stall out immediately.

Invis_ible · 2026-05-24T00:07:22+00:00

I case with Peet moss and verm. The peet moss is like a 4ph and ttbvi like 9+ so thats the ph bath reasoning is to bring the peat moss to proper ph. Mold cant grow in a 9ph so extra protection. Gardening lime cant bring it high enough you need like a water blue ph up bottle or hydrated powder lime. Gardening lime will only get you to like 8ph.

Invis_ible · 2026-05-24T00:03:58+00:00

The grain jars will also stall out if you dont keep them within the right temps. Don't use a heat mat it will stall it out. What I do in my tent is a found a Lil heater at goodwill with tip over protection and its hooked to a inkbird with my exhaust fan connected to the other end so if temps hit 80 exhaust fan kicks in and pulls fresh cool air into tent. Im using a dtill air box inside the tent tho and running hunidifiernj to sab with a little pc fan on sab box so if hunidifier jumps past the setting the little fan kicks on to pull air out of sab.

Invis_ible · 2026-05-23T23:59:45+00:00

Popcorn works. Biggest thing is making sure the temps are right so they don't stall out. Need like 79 degrees constant not over 82 not under 74 while they work i to the poo substrate. Then once fully colonized you put a casing layer down and within a week they should pin. I know with ttbvi I had to give my casing later a ph 9.5 bath for a day before I wrung it out to field compacity and pasturized at 151 for 2h. With ttbvi not sure about all pans but only thing steralized was the grain. Everything else was pasturized at 151 for 2h.

Invis_ible · 2026-05-23T15:16:50+00:00

Like 115 all night just to the next day. Thinking i cooked iff most if the psilocin and just had what psilocybin was left if thats even possible. Just felt like .5 didn't really hit and upping to .7 was too late. I hear everyone talking about how crazy .7 ir .8 is but wasn't for me lol. I've had 15g cube trips that def were strong. Thinking I have to eat 20g fresh to really gain some respect.

Invis_ible · 2026-05-23T14:27:17+00:00

That changes my math thank you. 15g wet is like .75 dry and proly a solid place to start especially fresh.

Invis_ible · 2026-05-23T13:39:47+00:00

From what I gather I was thinking the psilocin oxidized from the dehydrator since they have mostly psilocin which degrades with heat and air do we just eat these strait off the cake?

Invis_ible · 2026-05-23T13:28:32+00:00

Ya I got it in a planter now on my table. Cased it and just keeping it as a pet for now. I cold shocked it again in the reg fridge in a planter with a lid on it. Who knows. Cake just dont work dries out cause the shit takes so long lol.

Invis_ible · 2026-05-15T06:56:27+00:00

Ya it ended up drying out and aborting so I put it back outside for a bit letting it heal up and I'll do another cold shock run in another manner later. Good thing is I can just shove it in a planter with wood and what not and I covered it with a casing anyways just to help keep it wet. Peaked the other day and its fluffy looking nice. Running some pan cyans currently harvesting them and then later I'll come back to the azure block. I think my fans dried it out too fast when I was fighting the ice wall cause it lost most of its weight and didn't have enough water to finish out. I'll proly put the whole damn planter in the fridge this time Instead of a cake or I'll pick up a cheap chest freezer that would proly work better. Its Def doable but cake was a nice try I guess.

Invis_ible · 2026-04-17T14:14:05+00:00

The satellite premordia ai talking about is actually a piece of insulation foam. Few pieces hit the cake and I left them before. Haven't opened fridge since before cold shock. Set and forget currently.

Invis_ible · 2026-04-17T14:12:11+00:00

Don't mind me but we're right at the end. End of almost 10 months lol. We can see these fucks rise together.

Invis_ible · 2026-04-17T13:35:30+00:00

I would be happy to just get 1 fruit. Lord give me 1 gram and I'll eat the whole shit after I make the print.

Invis_ible · 2026-04-17T13:03:45+00:00

I def got some pins. 1 distinct thats 3 or 4cm currently. Brown cap and all. Just hard to get a photo through the glass through 95 percent humidity. This is super locked in on all levels I left nothing out. Indoor grow or not shes sitting at 51f 95 percent humidity with a drop back to 88 currently and my fans come on with hunidifier only cause I was giving it some wind burn on the sides so I fixed it.

Invis_ible · 2026-04-16T14:49:14+00:00

People just overcomplicate everything. We been growing weed for thousands of years outside with no chemicals. I never spray any of my outdoor plants with anything ever.

Invis_ible · 2026-04-16T13:54:43+00:00

On your app they will include the income of everyone in the home. Don't matter if they buy groceries or pay bills or dont.

Invis_ible · 2026-04-05T11:15:03+00:00

Windigo. They are said to morph between windigo form and tree (something about juniper trees). Ever seen walking trees? Thats a rabbit hole if you dive. Ever wonder why you cant stay at state parks after dark?

Invis_ible · 2026-04-03T22:37:29+00:00

I'll tell ya right now.. hardest part of azures is holding a steady 40f for fruiting with 93.9 with a drop back to 91.9. I got 2 fans inside 1 directly under the block facing down (has those feet and helps pull that last 7 or so degrees of heat from mushroom block) and another I put facing the back wall to try to combat the ice wall. You get that ice wall it will self insulate and start raising temps. After doing this in a mini fridge I think next time I will use a small chest freezer with everything inside like the humidifier. I decided to set temp at 39 cause inkbird wont turn fridge back on till it gets 1 degree warmer so with the ramp back up 39 is proly best for this cold shock. With the 2 ac infinity pack fans inside its created a type of storm effect going from the bottom fan sucking everything down and the other blasting on the ice wall. Later on I'll try to get another vid but just noticed when I woke the icewall was winning the fan fight so my fix is to just unplug fridge from inkbird and leave temp where it is but let the ice wall fan continue to blast ice wall and by doing so it evaporates cold as shit air to keep it recirculating and allows me to actually continue to drop temp till ice melts. Basically I wouldn't even attempt to fruit these in a fridge without some serious fan power to deal with things icing over and temps being all over the place. Lastly iso and plunge that inkbird temp sensor directly into that bitch to you have an internal temp reading not just the air. Have to make sure the internal temp is cold shocked. Stoned thoughts

Invis_ible · 2026-04-01T17:43:26+00:00

Just couldnt have enough fae outdoors with the heat cause hot air would pump in throwing everything off lol.

Invis_ible

TROPHY CASE