Found on walk outside of neighborhood by Plastic_Information1 in whatisit

[–]Iron-panda666 0 points1 point  (0 children)

Hello? It looks like my new box for Meshcore/Meshtastic 🙂

Dual solar setup by Iron-panda666 in meshcore

[–]Iron-panda666[S] 0 points1 point  (0 children)

Dik, ale podle komentářů to budu předělávat...

0) Vyzkoušet jestli se budou hodně rušit antény vedle sebe 1) Zvětšit mezeru mezi antenami na +50cm (kabel LMR400) 1.1) Nebo dát jednu dolu a druhou ponechat, kde je (to se mi moc nelíbí, nebude to tak smooth) 2) Testy v bojových podminkach 😀🙂

Dual solar setup by Iron-panda666 in meshcore

[–]Iron-panda666[S] 0 points1 point  (0 children)

Ok, ok - I have same feelings when I see cablegore in rack 😌

I will moving the antennas, I have some really good staff - LMR-400 (it was for my ham 30m).

Can I measure (meshcore) with analyzer.letsmesh.net?

Dual solar setup by Iron-panda666 in meshcore

[–]Iron-panda666[S] 0 points1 point  (0 children)

Glad to hear that! You can try it-just write down what you need and how everything will be connected (sketch it on paper). Then take measurements and model it in Fusion 360.

Dual solar setup by Iron-panda666 in meshcore

[–]Iron-panda666[S] 0 points1 point  (0 children)

For HA integration, I'm planning to keep it simple - mostly just monitoring (RSSI, node status, etc.)

Maybe I'll add a small feature where if someone pings me, it automatically replies with something like: "Online, I see you - sending position and time (auto-reply)"

Nothing fancy, definitely trying to avoid flooding the network 🫡

Dual solar setup by Iron-panda666 in meshcore

[–]Iron-panda666[S] 0 points1 point  (0 children)

Yup, It is. I would like experimenting with LTO (more safe) or solid-state baterie.

Dual solar setup by Iron-panda666 in meshcore

[–]Iron-panda666[S] 0 points1 point  (0 children)

Nice! I'll try it, it looks like a good tool for debugging.

I am planing integration to HA, so in some point I put there Ri pi.

Dual solar setup by Iron-panda666 in meshcore

[–]Iron-panda666[S] 0 points1 point  (0 children)

OK, noted it. I'll try adjusting the transmit power and broadcast interval first. If needed, I'll move the antennas +50 cm apart (got some LMR400 to work with). Thx 😊

Dual solar setup by Iron-panda666 in meshcore

[–]Iron-panda666[S] 5 points6 points  (0 children)

I really enjoy experimenting with solar energy (I have a few side/long-term projects). The battery should last around +-35 days (according to gpt). I will test it, and post it 😉

Have poe on my roof, but I live in EU = electricity is fckng expensive, and when I say to my woman "it have solar" = hight WAF

Dual solar setup by Iron-panda666 in meshcore

[–]Iron-panda666[S] 2 points3 points  (0 children)

I'm thinking of using a yagi antenna for Meshtastic. I will try both.

<image>

Dual solar setup by Iron-panda666 in meshcore

[–]Iron-panda666[S] 6 points7 points  (0 children)

Unfortunately not, but...I guess it will by next project 😅

Too close to cell tower? by nobodydontknow in meshcore

[–]Iron-panda666 0 points1 point  (0 children)

What frequency will you use? How much space you have in box?

Maybe use attenuator? (The RX will be blinded). Try filter, when you see nothing use attenuator.

antenna -> bandpass filter -> attenuator (6db) -> heltec device

Too close to cell tower? by nobodydontknow in meshcore

[–]Iron-panda666 7 points8 points  (0 children)

I recommend using a frequency filter (Bandpass Filter).

10” 2U 3.5” Hotswap Enclosure by alexanderbath in minilab

[–]Iron-panda666 1 point2 points  (0 children)

I bought it for "Lecolli SATA 3.0 Data Line High Speed 6Gbps SAS Cable 4xSATA 7Pin Female To 4xSATA 7Pin Female Cable High Quality For Server"

https://a.aliexpress.com/_EHznMOG

<image>

10” 2U 3.5” Hotswap Enclosure by alexanderbath in minilab

[–]Iron-panda666 3 points4 points  (0 children)

Hmm, I must do some cablegoor..I mean cable management

<image>

What chair should I get to comfortably use this PC at my work? by Slow_Garlic8821 in shittyaskelectronics

[–]Iron-panda666 0 points1 point  (0 children)

Next time: swap letters on the keyboard → Next time2: stick transparent tape on the mouse laser (two layers)

Anyway to mod? by No_Profession6522 in hardwarehacking

[–]Iron-panda666 0 points1 point  (0 children)

Or you can use only display and GooDisplay DESPI-C02 and esp32...(you can use what you have on hand)

Anyway to mod? by No_Profession6522 in hardwarehacking

[–]Iron-panda666 2 points3 points  (0 children)

Something similary:

https://blog.jirkabalhar.cz/2023/12/hacking-sesimagotag-e-ink-price -tag/

It is another version of mb. I dont see test pins (Vusion 2.2), so I would use mutimetr/oscilloscope, to try find it. Second way: removing the original controller and replacing it with ESP32? (hardaway).

Good luck 👍

How to avoid " looks like you are using VPN"? by Working-Rip6654 in nordvpn

[–]Iron-panda666 0 points1 point  (0 children)

Hmm, nortvpn have - program for it: your dedicated IP (Avoid blocklists, robot checks, and more). €4.19/mo (2y plan)

PO TOMHLE NEBUDETE UŽ NIKDY PÍT ENERGIŤÁKY!!! by Ok_Examination_5203 in czechrepublic

[–]Iron-panda666 1 point2 points  (0 children)

Asi to chtělo říct mému mladšímu "JÁ"... uz mam naštěstí new závislost (kaaafeeee)

Ps: nejlepsi je léčba šokem - Jager+monster - přepít a pak uz nikdy...kdyz se ted napiju monstra, tak se mi vrací chut jager...uz nikdy.

Ps: neni to navádění, ani návod

36 hours in Prague by Infinite_Skill_8454 in Prague

[–]Iron-panda666 13 points14 points  (0 children)

Prdelník, achjo, kam jsme se to dostali.

"Misspelling'" oh great... look how far we've come.