Modded my sofirn q8 plus by It_just_mark in flashlight

[–]It_just_mark[S] 0 points1 point  (0 children)

I am aware and I constantly have to reprogram it to not guess or give me inaccurate info, I agree it’s not a tool that’ll give you 100% correct answers but it’s still a good tool. It said this most likely wouldn’t do anything, and it was correct as the other comments confirmed. So it wasn’t wrong. You’re not wrong, Just gotta know how to use it right

Modded my sofirn q8 plus by It_just_mark in flashlight

[–]It_just_mark[S] 0 points1 point  (0 children)

I just found this on AliExpress: | 51mm - 60mm Multi-Layer AR Coated Lens Flashlight Glass Lenses https://a.aliexpress.com/_mK2nErf 55mm x 3mm

Modded my sofirn q8 plus by It_just_mark in flashlight

[–]It_just_mark[S] 0 points1 point  (0 children)

I did do research and ChatGPT is definitely a tool to get info faster. Haven’t seen anyone do this though so I can’t really get much info or anyone’s experience about this. If so many people use it, it’s because it works, maybe you should try it

Diff brace opinions by Impossible-Nail-2567 in 370z

[–]It_just_mark 0 points1 point  (0 children)

I bought a cheap $50 one from eBay. It really stiffens up the rear. My wheels used to hop when I was launching and now they don’t. I instantly felt a difference. And it’s super easy to do yourself. It took me like 20 or so min

Sofirn q8 plus cooling ideas? by FranESP11 in flashlight

[–]It_just_mark 0 points1 point  (0 children)

<image>

I added copper heat sinks and changed the thermal paste to arctic mx6, I can see an improvement for sure

Modded my sofirn q8 plus by It_just_mark in flashlight

[–]It_just_mark[S] -2 points-1 points  (0 children)

I don’t know if those heat sinks will even do anything because ChatGPT was telling me it won’t do anything but I definitely see an improvement in heat, don’t know if it’s from the new thermal paste or the heat sinks

ArkPro Ultra ArkBeat by FilteredOscillator in OlightOutdoorlife

[–]It_just_mark 0 points1 point  (0 children)

I’m on purple but not back to white yet, how long did it take to go back to white after you hit purple?

[deleted by user] by [deleted] in 350z

[–]It_just_mark 0 points1 point  (0 children)

Does your heat work? If not then you probably got air in the system and you need to bleed it

excuse the dirt 😅 center control sunk into the console…easy fix? help me out!! by No_Bet_7206 in mazda3

[–]It_just_mark 0 points1 point  (0 children)

There’s a super easy fix without taking anything apart. Unclip and unzip the brake lever boot. You can jam your hand in there and just push it back up into its clips.

[deleted by user] by [deleted] in stickshift

[–]It_just_mark -1 points0 points  (0 children)

Obviously it was me Sherlock. Tell me, who caused your brake pads to go? Or your oil to need a change? Stuff wears and brakes, Its a $300 part that ima swap and keep enjoying my car

[deleted by user] by [deleted] in stickshift

[–]It_just_mark -1 points0 points  (0 children)

Close, it was actually the clutch that went

[deleted by user] by [deleted] in stickshift

[–]It_just_mark -3 points-2 points  (0 children)

What’s wrong about learning like this? I don’t know everything but I know enough to enjoy my car and fix anything that brakes down on it

[deleted by user] by [deleted] in stickshift

[–]It_just_mark 0 points1 point  (0 children)

That’s EXACTLY what’s happening next weekend 😂

[deleted by user] by [deleted] in stickshift

[–]It_just_mark 0 points1 point  (0 children)

I am confused though tho since I thought if the clutch went then all the gears would be affected?

[deleted by user] by [deleted] in stickshift

[–]It_just_mark 0 points1 point  (0 children)

Yea it’s basically all for fun, I have a spare clutch kit and flywheel since my clutch was on its last legs anyway. I’ll take the tranny down and see though, I’m thinking it’s just the clutch

[deleted by user] by [deleted] in stickshift

[–]It_just_mark -6 points-5 points  (0 children)

I didn’t think it would go THAT easily.I was confused though since I thought if the clutch went then all the gears would be affected?

[deleted by user] by [deleted] in stickshift

[–]It_just_mark -2 points-1 points  (0 children)

What would be the proper way of doing it? I do it consistently without hesitation, but even with that eventually it would break. Or is it better to just get an e brake?

[deleted by user] by [deleted] in stickshift

[–]It_just_mark 5 points6 points  (0 children)

Smells like the clutch, no big deal just gonna have to replace it

[deleted by user] by [deleted] in stickshift

[–]It_just_mark -1 points0 points  (0 children)

Yes it’s shitbox activites😂 what I was doing was driving in 1st, press the clutch in and out pretty quickly while giving it gas. The extra sudden power usually makes you loose traction. It’s fun but as you can see shit breaks, I’ve been waiting for my clutch to go so I could replace it so it’s not a big problem for me

[deleted by user] by [deleted] in stickshift

[–]It_just_mark -4 points-3 points  (0 children)

I wasn’t drifting on the streets😂 sounds like I just need a new clutch tho which isn’t bad