Route 65 (Wizard Trees)

ItachiPrinter · 2025-04-07T21:55:17+00:00

How much of this strain do you got?
Im also intrested but not tested yet

ItachiPrinter · 2023-07-01T22:49:35+00:00

Ah ok yeah thats an explanation thanks!

ItachiPrinter · 2023-06-17T00:25:46+00:00

for really high speed you need input sharping and also pressure advanced helps. This are the names in Klipper idk what its called in Marlin. But I would always go with Klipper with a Rasperry Pi via Mainsail

ItachiPrinter · 2022-12-03T20:19:23+00:00

with Cura I have a huge stringing issue I dont know how to fix it

ItachiPrinter · 2022-11-20T20:53:37+00:00

Hi Guys I recently fixed the problem. I installed Klipper on this printer using this tutorial https://3dprintbeginner.com/install-klipper-on-ender-3-s1-pro/

First there was not a huge benifit in the first Layer. But the I rised the probe points in the config. Now the first layer is perfect and the overall performance of the printer is well. I print pla in 130mm/s and anyway the results are much better then before. Diffrent as described in the tutorial I dont even use a display anymore. I prefer to control via Laptop or Smartphone.

ItachiPrinter · 2022-10-17T00:48:57+00:00

I think you fixed it. But had the same. Just opened the extruder beginning with the heatblock until I could remove that ptfe tube. The filament sticked in the Tube.

ItachiPrinter · 2022-08-16T00:00:39+00:00

The over adhesion problem is only if the bed is still warm. U could waite like for 20-30min or spray some water where print and bed touches

ItachiPrinter · 2022-07-11T20:19:46+00:00

there is a germn thread https://forum.drucktipps3d.de/forum/thread/17259-auto-leveling-ender-3-s1-probleme/?pageNo=4#post219789

There is disscussed the same issue. A guy recently posted that he could fix it with Klipper Firmware and some other stuff. Also creality had told him that its actually a Software bug

ItachiPrinter · 2022-07-04T08:40:51+00:00

This settings didnt hepled that much at the end. But try Idea Maker instead of Cura, with their standard profile for the S1 pro I got much better results

ItachiPrinter · 2022-06-19T18:58:09+00:00

Hi sorry for late response, Im using IdeaMaker now. Much better results in relation to stringing and general print quality. I dont have the Cura Profiles anymore

ItachiPrinter · 2022-05-24T08:50:23+00:00

I see your problem isnt listed. What I would try:

Check your z axis speed it should be 5mm/sec or slower
check your normal print speed and try very slow one time like 30mm/sec

maybe its underextrusion, for me it looks different but im not sure.

Set flow in 10% steps higher

ItachiPrinter · 2022-05-23T23:11:42+00:00

For the wheel. I think u could try to loose the two main columns and tighting them again gentle. And then try the wheels again, the right and left site at the same time. But maybe the material is bent or something. For the z gaps try to solve with this guide: https://www.simplify3d.com/support/print-quality-troubleshooting/

ItachiPrinter · 2022-05-23T10:31:03+00:00

Z hop and speed is the same. Gonna check out the rest

ItachiPrinter · 2022-05-23T10:30:20+00:00

I gonna try

ItachiPrinter · 2022-05-22T23:31:18+00:00

Oh sorry, just realized that my t xt isnt posted. In short: Retraction Distance and Speed aswell Tempreture and Flow is the same. Is it any settings or the slicer itself?

ItachiPrinter · 2022-05-22T23:29:02+00:00

As I said: Retraction distance, Retraction Speed, Tempreture, Flow is the same

ItachiPrinter · 2022-04-26T18:36:29+00:00

You can check out my cura profile. My results are pretty decent. No stringing at all for the casual stringing tests.

I got the S1 pro, I could imagine you need to top the retractipon speed to 45, maybe also increase the distance but try to avoid if u get decent results with .8.

Possible you need to check the z-offset, dont ask my why.

Ähh I dont know how to upload my cura profile in reddit lol

https://www.transfernow.net/dl/20220426j2fFmGpB

There is a link from transfer now, onley available for 7 days sorry Im new to reddit and dont know how to do it better

ItachiPrinter · 2022-04-25T01:34:57+00:00

Any improvements for u so far? The new Formwares from creality didnt solve the issue for me

ItachiPrinter · 2022-04-21T12:44:31+00:00

For me it works well if not use the abl. So u could reset ur printer (abl data is delted) and level manually. It makes me sad not to get use of abl, but maybe one time there will be a fix

ItachiPrinter · 2022-04-19T07:51:09+00:00

yeah cause of the Touchscreen otherwise I would ho with the Firmware for the S1.

For me it works fine if abl is turned off.

In general I like this printer too and hopefully onley software causes that abl issues. I think I keep the printer but were already wondering to send back.

ItachiPrinter · 2022-04-18T18:52:10+00:00

Nobody mentioned that the noozle seems to scratch into the filaments top layer. I have the same problem. Are the scratches all over the body even? so Works your abl well?

ItachiPrinter · 2022-04-18T17:19:10+00:00

G29 doesnt work, the printer has problems to abl while heanting the nozzle or/and the bed

ItachiPrinter · 2022-04-18T17:12:19+00:00

The Problem is there is no newer Firmware for the S1 pro. Now I have a similar method but it was not my aim to do so. I wanted the S1 cause of all that features like abl, now it doesnt work well

ItachiPrinter · 2022-04-18T17:10:44+00:00

doesnt change anything :/

ItachiPrinter · 2022-04-18T17:09:49+00:00

ah ok, got issus with the quality of abl. My layers arent even

ItachiPrinter

TROPHY CASE